2ACCJH143GSM/UMTS/LTE mobile phone

English - CJB2J00LCAAA Printed in China Quick Start Guide Thank you for choosing TCL. This booklet helps you get started with your new device. For more information about your phone or to download the complete user manual version, please visit tcl.com/us Phone Setup Installing or removing the SIM card and microSD TM card Your phone already has a SIM card installed. If you need to change or remove your SIM card, follow the steps below.  Use the provided SIM pin to open the SIM tray.  To install SIM/microSD TM card, place the SIM/microSD TM card with the chip facing down into the SIM card tray and then slide it into its slot.  To remove SIM/microSD TM card, push up on the chip side of the cards inside the SIM tray.   Charging the battery It is advised that you fully charge your battery before first use ( ). Connect the charger to your phone and an outlet. Charging status is indicated by the percentage on screen while the phone is powered off. The percentage increases as the phone is charged. Power on your phone Hold down the Power key until the phone powers on, unlock your phone (screen lock, face unlock) if necessary and confirm. The Home screen is displayed. If you do not know your PIN/password or pattern, or if you have forgotten it, contact your service provider. Do not leave your PIN/password or pattern, with your phone. Store this information in a safe place when not in use. Set up your phone for the first time The first time you power on the phone, you'll be able to select your language, select a network, log in to your Google Account and Google Services, and select a screen lock option. Power off your phone Hold down the Power key from any screen until the phone options appear, select Power off. Personalize your Home screen Add You can touch and hold a folder, an application or a widget to activate the Move mode and drag the item to any Home screen as you prefer. Reposition Touch and hold the item to be repositioned to activate the Move mode, drag the item to the desired position and then release. You can move items both on the Home screen and the favorite tray. Hold the icon on the left or right edge of the screen to drag the item to another Home screen. Remove Touch and hold the item to be removed to activate the Move mode, drag the item up to the top of the Remove icon, and release after the item turns grey. Create folders To improve the organization of items (shortcuts or applications) on the Home screen and the favorite tray, you can add them to a folder by stacking one item on top of another. To rename a folder, open it and touch the folder’s title bar to input the new name. Wallpaper customization Touch and hold the Home screen then touch Wallpapers to customize wallpaper. Messages You can create, edit, and receive SMS and MMS with this phone. To access this feature, touch Messages from the Home screen. Touch to take a photo/video or attach a photo/video. Touch to give access to your location, send a voice message or attach files. Touch to enter voice input. Touch to switch to "abc/Abc" mode; Touch and hold to switch to "ABC" mode. Sending a message Enter the mobile phone number of the recipient in the To bar or select a contact, then touch the Tex t message bar to type the text of the message. When finished, touch to send the text message. An SMS of more than 160 characters will be split and sent as multiple SMS. A counter will be displayed on the right of the text box to remind you of how many characters can be entered in one message. Specific letters (accent) will also increase the size of the SMS, this may cause multiple SMS to be sent to your recipient. Sending a multimedia message MMS enables you to send video clips, images, photos, animations, slides and sounds to other compatible phones and e-mail addresses. An SMS will be converted to MMS automatically when media files (image, video, audio, slides, etc.) are attached or subject or email addresses are added. Gmail In addition to your Gmail account, your phone supports external POP3, IMAP or Exchange email accounts. To access this feature, swipe up on Home screen then select Gmail. To create and send emails • Touch from the Inbox screen. • Enter recipient(s) email address(es) in the To: field. • If necessary, tap next to the To: field to add Cc/Bcc to the message. • Enter the subject and the content of the message. • Ta p to add an attachment. • Ta p to send. Camera & Video Your phone's camera is equipped with multiple modes for taking photos and videos. From the home screen, touch to access. To take a picture: The screen acts as the viewfinder. First, position the object or landscape in the viewfinder, touch the screen to focus if necessary. Touch to capture, the photo will be automatically saved. You can also touch and hold to take burst shots. To take a video: Touch VIDEO to change the camera mode to video. Touch to start video recording. Touch the left part of this icon to take a picture during video recording. Touch the right part of this icon to pause video recording and touch to continue. Touch to stop recording. The video will be automatically saved. Phone Placing a call Touch Phone from the Home screen. Show the dial pad Enter the desired number from the keyboard directly, or select one of the following: • Access frequently called or favorite contacts in Favorites . • View recently called numbers and contacts in Recents . • Choose a saved contact in Contacts . Touch to place the call. To hang up a call, touch . Answering or rejecting a call When you receive a call: • Swipe up to answer. • Swipe down to reject. • Swipe to reject the call by sending a preset message. To mute the ringtone volume of an incoming call, press the Volume up/down key. Contacts Contacts enables quick and easy access to the people you want to reach. You can view and create contacts on your phone. To access this feature, swipe up on the Home screen, then select Contacts . Adding a contact Touch to add a new contact • Touch to view c…

Text truncated - open the document above for the full version.

Safety and Precautions 1 This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio waves section. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. SAR 2 Safety and use ������������������������� We recommend that you read this chapter carefully before using your phone. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY: Given that studies show that using a phone while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset, etc.), drivers are requested to refrain from using their phone when the vehicle is not parked. Check the laws and regulations on the use of wireless phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE: • You are advised to switch off the phone from time to time to optimize its performance. • Remember to abide by local authority rules of mobile phone use on aircrafts. • If your phone is a unibody device, where the back cover and battery are not removable, disassembling the phone will void your warranty. Disassembling the phone can cause bodily injury if the battery is punctured. • Always handle your phone with care and keep it in a clean and dust-free place. • Do not allow your phone to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturer’s recommended operating temperature range is -10°C (14°F) to +45°C (113°F). At over 45°C (113°F), the legibility of the phone’s display may be temporarily impaired. • Do not open, dismantle, or attempt to repair your phone yourself. • Do not drop, throw, or bend your phone. • Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and which are compatible with your phone model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries. • Your phone should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products. • Remember to make backup copies or keep a written record of all important information stored on your phone. • Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person has never experienced them before. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone. 3 • Parents should monitor their children’s use of video games or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. PRIVACY: Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your phone regarding taking photographs and recording sounds with your phone. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your phone (including the carrier) disclaim any liability which may result from improper use of the phone. BATTERY: For a non-unibody device: Observe the following precautions: • Do not attempt to open the battery (due to the risk of toxic fumes and burns). • Do not puncture, disassemble, or cause a short circuit in the battery. • Do not burn or dispose of a used battery in household garbage or store it at temperatures above 60°C (140°F). Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication Ltd. and/or its affiliates. For a non-unibody device with a non-removable battery: Observe the following precautions: • Do not attempt to eject, replace, or open the battery. • Do not puncture, disassemble, or cause a short circuit in the battery. • Do not burn or dispose of your phone in household garbage or store it at temperature above 60°C (140°F). Phone and battery must be disposed of in accordance with locally applicable environmental regulations. For a unibody device: Observe the following precautions: • Do not attempt to open the back cover. • Do not attempt to eject, replace, or open the battery. • Do not puncture the back cover of your phone. • Do not burn or dispose of your phone in household rubbish or store it at temperature above 60°C (140°F). Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. 4 This symbol on your phone, the battery, and the accessories means that these product…

Text truncated - open the document above for the full version.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com Date 2022-01-07 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL-Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com 2022-01-07 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJH143 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com 2022-01-07 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality request for FCC ID: 2ACCJH143 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: - External Photos - Internal Photos - Test Setup Photos - User manual The applicant also acknowledges that they will also provide appropriate notice to ACB should either of the following occur: a) if the applicant requires additional 45 days extension periods they will notify ACB with a new request letter at least 7 days prior to the short-term confidentiality expiration date – [Note: up to a maximum of 3 extensions only are allowed], or b) Immediately notify ACB in the event the information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

EUTphotograph T603DL

FCC E-label information: Model: T603DL Electronic labeling Path: Touch Settings – System – Regulatory & Safety, you can find more information about labeling, such as FCC ID. Yes The instructions are showed on User manual.

EUTInteriorphotograph T603DL

©Copyright. All rights reserved by CTTL. FCC PART 15C TEST REPORT No. I21Z62393-IOT01 for TCL Communication Ltd. GSM/UMTS/LTE Mobile phone Model Name: T603DL FCC ID: 2ACCJH143 with Hardware Version: PIO Software Version: vR4G Issued Date: 2021-12-31 Note: The test results in this test report relate only to the devices specified in this report.This report shall not be reproduced except in full without the written approval of CTTL. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S.Government. Test Laboratory: CTTL, Telecommunication Technology Labs, CAICT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected], website: www.chinattl.com No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 2 of 93. REPORT HISTORY Report Number Revision Description Issue Date I21Z62393-IOT01 Rev.0 1st edition 2021-12-31 No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 3 of 93. CONTENTS 1. Test Laboratory ....................................................................................................................................... 5 1.1. Introduction &Accreditation ....................................................................................................... 5 1.2. Testing Location .......................................................................................................................... 5 1.3. Testing Environment ................................................................................................................... 6 1.4. Project data.................................................................................................................................. 6 1.5. Signature ..................................................................................................................................... 6 2. Client Information ................................................................................................................................... 7 2.1. Applicant Information ................................................................................................................. 7 2.2. Manufacturer Information ........................................................................................................... 7 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) ............................................................... 8 3.1. About EUT .................................................................................................................................. 8 3.2. Internal Identification of EUT ..................................................................................................... 8 3.3. Internal Identification of AE ....................................................................................................... 8 3.4. Normal Accessory setting ........................................................................................................... 9 3.5. General Description .................................................................................................................... 9 4. Reference Documents ........................................................................................................................... 10 4.1. Documents supplied by applicant ............................................................................................. 10 4.2. Reference Documents for testing .............................................................................................. 10 5. Test Results ............................................................................................................................................11 5.1. Summary of Test Results ...........................................................................................................11 5.2. Statements ..................................................................................................................................11 6. Test Facilities Utilized .......................................................................................................................... 12 7. Measurement Uncertainty ..................................................................................................................... 13 7.1. Peak Output Power - Conducted ............................................................................................... 13 7.2. Frequency Band Edges - Conducted ......................................................................................... 13 7.3. Frequency Band Edges - Radiated ............................................................................................ 13 7.4. Transmitter Spurious Emission - Conducted ............................................................................ 13 7.5. Transmitter Spurious Emission - Radiated ................................................................................ 13 7.6. Time of Occupancy (Dwell Time) ............................................................................................ 13 7.7. 20dB Bandwidth ....................................................................................................................... 14 7.8. Carrier Frequency Separation ................................................................................................... 14 7.9. AC Powerline Conducted Emission .......................................................................................... 14 ANNEX A: EUT parameters......................................................................................................................... 15 ANNEX B: Detailed Test Results ................................................................................................................. 16 B.1. Measurement Method ................................................…

Text truncated - open the document above for the full version.

No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 53 of 93. Fig.58. Conducted spurious emission: 8DPSK, Channel 39, 10GHz – 26GHz Fig.59. Conducted spurious emission: 8DPSK, Channel 78, 2480MHz No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 54 of 93. Fig.60. Conducted spurious emission: 8DPSK, Channel 78, 30MHz - 1GHz Fig.61. Conducted spurious emission: 8DPSK, Channel 78, 1GHz - 3GHz No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 55 of 93. Fig.62. Conducted spurious emission: 8DPSK, Channel 78, 3GHz - 10GHz Fig.63. Conducted spurious emission: 8DPSK, Channel 78, 10GHz - 26GHz No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 56 of 93. B.6. Transmitter Spurious Emission - Radiated Method of Measurement: See ANSI C63.10-2013-clause 6.4 &6.5 & 6.6 Measurement Limit: Standard Limit FCC 47 CFR Part 15.247, 15.205, 15.209 20dB below peak output power radiated emissions which fall in the restricted bands, as defined in § 15.205(a), must also comply with the radiated emission limits specified in § 15.209(a) (see § 15.205(c)). Limit in restricted band: Frequency (MHz) Field strength(μV/m) Measurement distance (m) 0.009 - 0.490 2400/F(kHz) 300 0.490 - 1.705 24000/F(kHz) 30 1.705 – 30.0 30 30 Frequency of emission (MHz) Field strength(uV/m) Field strength(dBuV/m) 30-88 100 40 88-216 150 43.5 216-960 200 46 Above 960 500 54 Set up: Tabletop devices shall be placed on a nonconducting platform with nominal top surface dimensions 1 m by 1.5 m. For emissions testing at or below 1 GHz, the table height shall be 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table height shall be 1.5 m The EUT and transmitting antenna shall be centered on the turntable. No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 57 of 93. Test Condition The EUT shall be tested 1 near top, 1 near middle, and 1 near bottom. Set the unlicensed wireless device to operate in continuous transmit mode. For unlicensed wireless devices unable to be configured for 100% duty cycle even in test mode, configure the system for the maximum duty cycle supported. When required for unlicensed wireless devices, measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115% of the nominal rated supply voltage. Exploratory radiated emissions measurements Exploratory radiated measurements shall be performed at the measurement distance or at a closer distance than that specified for compliance to determine the emission characteristics of the EUT and, if applicable, the EUT configuration that produces the maximum level of emissions. The frequencies of maximum emission may be determined by manually positioning the antenna close to the EUT, and then moving the antenna over all sides of the EUT while observing a spectral display. It is advantageous to have prior knowledge of the frequencies of emissions, although this may be determined from such a near-field scan. The near-field scan shall only be used to determine the frequency but not the amplitude of the emissions. Where exploratory measurements are not adequate to determine the worst-case operating modes and are used only to identify the frequencies of the highest emissions, additional preliminary tests can be required. For emissions from the EUT, the maximum level shall be determined by rotating the EUT and its antenna through 0° to 360°. For each mode of operation required to be tested, the frequency spectrum (based on findings from exploratory measurements) shall be monitored. Broadband antennas and a spectrum analyzer or a radio-noise meter with a panoramic display are often useful in this type of test. If either antenna height or EUT azimuth are not fully measured during exploratory testing, then complete testing can be required at the OATS or semi-anechoic chamber when the final full spectrum testing is performed. Final radiated emissions measurements The final measurements are using the orientation and equipment arrangement of the EUT based on the measurement results found during the preliminary (exploratory) measurements, the EUT arrangement, appropriate modulation, and modes of operation that produce the emissions that have the highest amplitude relative to the limit shall be selected for the final measurement. No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 58 of 93. For each mode of operation required to be tested, the frequency spectrum (based on findings from exploratory measurements) shall be monitored. The highest signal levels relative to the limit shall be determined by rotating the EUT from 0° to 360° and with varying the measurement antenna height between 1 m and 4 m in vertical and horizontal polarizations. For each mode selected, record the frequency and amplitude of the highest fundamental emission (if applicable), as well as the frequency and amplitude of the six highest spurious emissions relative to the limit. Emissions more than 20 dB below the limit do not need to be reported. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. The receiver references: Frequency of emission (MHz) RBW/VBW Sweep Time(s) 30-1000 100kHz/300kHz 5 1000-4000 1MHz/3MHz 15 4000-18000 1MHz/3MHz 40 18000-26500 1MHz/3MHz 20 P Mea is the field strength recorded from the instrument. The measurement results are obtained as described below: Result= P Mea + Cable Loss + Antenna Factor Where: P Mea field strength recorded from the instrument No. I21Z62393-IOT01 ©Copyright. All rights reserved by CTTL. Page 59 of 93. Peak Measurement results GFSK Ch 0 Frequency (MHz) Measurement Result (dBuV/m) Cable Loss (dB) Antenna Factor (dB/m) Receiver Reading (dBuV) Limit (dBuV/m) Margin (dB) Antenna Pol. (H/V) 17929.500 54.09 -25.50 46.70 32.89 74.00 19.91 V 13651.000 51.06…

Text truncated - open the document above for the full version.

T603DLSetupphotos 22/24/27 15B Part15Ctest