2ACCJH182GSM/UMTS/LTE/NR Mobile phone

TO: Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: TCT Mobile (US) Inc. Contact Name: Yao Dai Street Address: 189 Technology Drive City/Province/Zip: Irvine, CA 92618 Telephone No: 1-855-368-0829 Email: [email protected] FRN #: 0033429465 This letter is to confirm that we (the “Designated U.S. Agent”) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: February 1, 2024 Signed by (Printed Name/Title): Yao Dai / Technical Acceptance Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TCL Communication Ltd. Grantee Code: 2ACCJ FRN: 0031833205 Contact Name: Annie Jiang Street Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong City/Province/Zip: Hongkong Telephone No: +86 755 36611621 Email: [email protected] Applicant Signature: Date: 2024-02-01 Signed by (Printed Name/Title): Annie Jiang / Product Certification Manager DocuSign Envelope ID: A00433F1-0A21-4D92-8A6A-5C5214FAEB47

021423-17 rev 4 Certification Application Attestation Statements Date: January 19, 2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) TCL Communication Ltd. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) TCL Communication Ltd. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is /  - is not identified on the Covered List as an entity producing “covered” equipment. Thank you, By: Annie Jiang (Signature 2 ) (Print name) Title: Product Certification Manager Company: TCL Communication Ltd. Telephone: +86 755 36611621 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead.

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Tel: 0086-755-36611722 http://tclcom.tcl.com Date 2024-02-01 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL-Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Annie Jiang Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Tel: 0086-755-36611722 http://tclcom.tcl.com 2024-02-01 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: '2ACCJH182 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Annie Jiang Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Tel: 0086-755-36611722 http://tclcom.tcl.com 2024-02-01 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality request for FCC ID: '2ACCJH182 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: - External Photos - Internal Photos - Test Setup Photos - User manual The applicant also acknowledges that they will also provide appropriate notice to ACB should either of the following occur: a) if the applicant requires additional 45 days extension periods they will notify ACB with a new request letter at least 7 days prior to the short-term confidentiality expiration date – [Note: up to a maximum of 3 extensions only are allowed], or b) Immediately notify ACB in the event the information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Yours Sincerely, Annie Jiang Product Certification Manager TCL Communication Ltd.

TCLCommunicationLtd. 5/F,Building22E,22ScienceParkEastAvenue,HongKongSciencePark,Shatin, NT,HongKong Tel:0086-755-36611722;Fax:0086-755-36612000-81722 Statement We,TCLCommunicationLtd.,statesthatourdevicewithFCCID:2ACCJH182isa multi-bandmobilephonewhichsupportsGSM850/900/1800/1900,WCDMABand 1/2/4/5/8,LTEB1/2/3/4/5/7/8/12/13/17/20/25/26/28/32/38/40/41/42/48/66,Sub6SA n1/2/3/5/7/8/20/26/28/38/40/41/48/66/71/77/78andNSAn1/3/5/7/8/28/38/40/41/66/78 forcellularnetwork.Forconnectivityfunctions,itiscapableof2.4GHzWiFi 11b/11g/11n-HT20/11n-HT40,5GHzWiFi11a/11n-HT20/11n-HT40,11ac- VHT20/11ac-VHT40/11ac-VHT80(5.745GHz– 5.825GHzfrequencyrangedisabledinEUcountries’areabasedongeo-information), andBluetooth5.3LE(downwardcompatibleandLE1M&2MsupportedinBLE5.3), alongwithFM. However,thefrequencyof5GNRn77/n78isonlysupport3450-3550MHzand 3700~3980MHzinUSmarketmarket。 AndalsoLTEband40and42isnotavailableinUSmarketandCanadamarket,and willbedisabledbysoftware. AnnieJiang ProductCertificationManager TCLCommunicationLtd.

Prepared by: Wei Fangying Approved by: Fan Guangchang TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 SAR TEST REPORT Applicant TCL Communication Ltd. FCC ID 2ACCJH182 Product GSM/UMTS/LTE/NR Mobile phone Brand TCL Model T613P Report No. R2401A0062-S1V2 Issue Date March 12, 2024 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in IEEE 1528-2013, ANSI C95.1: 1992, IEEE C95.1: 1991. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 2 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ................................................................................................................................. 5 1.1 Notes of the Test Report ............................................................................................................ 5 1.2 Test Facility ................................................................................................................................ 5 1.3 Testing Location......................................................................................................................... 5 1.4 Laboratory Environment ............................................................................................................ 5 2 Statement of Compliance .................................................................................................................. 6 3 Description of Equipment Under Test ............................................................................................... 8 4 Test Specification, Methods and Procedures ................................................................................. 11 5 Operational Conditions during Test ................................................................................................. 12 5.1 Test Positions .......................................................................................................................... 12 5.1.1 Against Phantom Head ................................................................................................... 12 5.1.2 Body Worn Configuration ................................................................................................ 12 5.1.3 Phablet SAR Test Considerations ................................................................................. 13 5.2 Measurement Variability .......................................................................................................... 14 5.3 Test Configuration ................................................................................................................... 15 5.3.1 GSM Test Configuration ................................................................................................. 15 5.3.2 WCDMA Test Configuration ........................................................................................... 15 5.3.3 LTE Test Configuration ................................................................................................... 19 5.3.4 Additional Requirements for TDD LTE Specification .................................................. 20 5.3.5 5G NR Test Configuration .............................................................................................. 23 5.3.6 Wi-Fi Test Configuration ................................................................................................. 24 5.3.7 Bluetooth Test Configuration .......................................................................................... 25 5.3.8 LTE CA specification ....................................................................................................... 25 5.3.9 Power Reduction Configuration ..................................................................................... 29 6 SAR Measurements System Configuration .................................................................................... 37 6.1 SAR Measurement Set-up ....................................................................................................... 37 6.2 DASY5 E-field Probe System .................................................................................................. 38 6.3 SAR Measurement Procedure ................................................................................................. 39 7 Main Test Equipment ....................................................................................................................... 41 8 Tissue Dielectric Parameter Measurements & System Check ....................................................... 43 8.1 Tissue Verification ................................................................................................................... 43 8.2 System Check .......................................................................................................................... 45 8.3 SAR System Validation ............................................................................................................ 48 9 Normal and Maximum Output Power .............................................................................................. 49 9.1 GSM Mode ............................................................................................................................... 49 9.2 WCDMA Mode ......................................................................................................................... 51 9.3 LTE Mode ................................................................................................................................ 55 9.4 CA Mode .........................................................................…

Text truncated - open the document above for the full version.

SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 457 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 65 NR n77 50%RB Back Side 15mm High Date: 2024/2/6 Communication System: UID 0, 5G NR (0); Frequency: 3930 MHz;Duty Cycle: 1:1 Medium parameters used: f = 3930 MHz; σ = 1.831 S/m; ε r = 37.663; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(6.85, 7.30, 6.98); Calibrated: 2023/7/20 Electronics: DAE4 SN1317; Calibrated: 2023/9/13 Phantom: SAM 2; Type: QD000P40CD; Serial: TP:1666 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Back Side 15mm/High/Area Scan (12x20x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.572 W/kg Back Side 15mm/High/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 3.107 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 1.132 W/kg SAR(1 g) = 0.519 W/kg; SAR(10 g) = 0.249 W/kg Smallest distance from peaks to all points 3 dB below = 12.5 mm Ratio of SAR at M2 to SAR at M1 = 47.6% Maximum value of SAR (measured) = 0.662 W/kg SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 458 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 66 802.11b Back Side 15mm Middle Date: 2024/2/1 Communication System: UID 0, 802.11b (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.831 S/m; ε r = 37.663; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(7.18, 7.67, 7.29); Calibrated: 2023/7/20 Electronics: DAE4 SN1317; Calibrated: 2023/9/13 Phantom: SAM 2; Type: QD000P40CD; Serial: TP:1666 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Back Side 15mm/Middle/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.172 W/kg Back Side 15mm/Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.107 V/m; Power Drift = 0.053 dB Peak SAR (extrapolated) = 0.332 W/kg SAR(1 g) = 0.165 W/kg; SAR(10 g) = 0.083 W/kg Smallest distance from peaks to all points 3 dB below = 12.5 mm Ratio of SAR at M2 to SAR at M1 = 47.6% Maximum value of SAR (measured) = 0.180 W/kg SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 459 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 67 802.11a Back Side 15mm High Date: 2024/2/1 Communication System: UID 0, 802.11a (0); Frequency: 5700 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5700 MHz; σ = 5.38 S/m; ε r = 35.438; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(5.14, 5.41, 5.20); Calibrated: 2023/7/20 Electronics: DAE4 SN1317; Calibrated: 2023/9/13 Phantom: SAM 2; Type: QD000P40CD; Serial: TP:1666 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Back Side 15mm/High/Area Scan (12x20x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.505 W/kg Back Side 15mm/High/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=5mm Reference Value = 0.8260 V/m; Power Drift = 0.035 dB Peak SAR (extrapolated) = 1.13 W/kg SAR(1 g) = 0.256 W/kg; SAR(10 g) = 0.108 W/kg Smallest distance from peaks to all points 3 dB below = 12.9 mm Ratio of SAR at M2 to SAR at M1 = 40.2% Maximum value of SAR (measured) = 0.642 W/kg SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 460 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 68 LTE Band7 1RB Back Side 15mm High(EN-DC) Date: 2024/2/19 Communication System: UID 0, LTE (0); Frequency: 2560 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2560 MHz; σ = 1.953 S/m; ε r = 38.015; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(7.10, 7.59, 7.21); Calibrated: 2023/7/20 Electronics: DAE4 SN1317; Calibrated: 2023/9/13 Phantom: SAM 2; Type: QD000P40CD; Serial: TP:1666 Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Back Side 15mm/High/Area Scan (10x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.514 W/kg Back Side 15mm/High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.891 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 1.05 W/kg SAR(1 g) = 0.497 W/kg; SAR(10 g) = 0.249 W/kg Smallest distance from peaks to all points 3 dB below = 13 mm Ratio of SAR at M2 to SAR at M1 = 46.6% Maximum value of SAR (measured) = 0.537 W/kg SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 461 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 69 LTE Band41 1RB Back Side 15mm Middle(EN-DC) Date: 2024/2/19 Communication System: UID 0, LTE (0); Frequency: 2549.5 MHz;Duty Cycle: 1:1.58 Medium parameters used (interpolated): f = 2549.5 MHz; σ = 1.942 S/m; ε r = 38.069; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX…

Text truncated - open the document above for the full version.

SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 537 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 538 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 539 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 540 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 541 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX I: D2450V2 Dipole Calibration Certificate SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 542 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 543 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 544 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 545 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 546 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 547 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX J: D2600V2 Dipole Calibration Certificate SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 548 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 549 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 550 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 551 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 552 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 553 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX K: D3500V2 Dipole Calibration Certificate SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 554 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 555 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 556 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 557 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 558 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 559 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX L: D3700V2 Dipole Calibration Certificate SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 560 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 561 of 586 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. SAR Test Report Report No.: R2401A0062-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 562 of 586…

Text truncated - open the document above for the full version.

· AntennaReports MainAntennavendor:SHenZHenDemanElectronicsCo.,Lte. Address:Floor5,BuildingC,No.28,TangqingWestRoad,Shitanpu,TangxiaTown, DongguanCity,GuangdongProvince AntennagainandradiationpatternmeasuredinSATIMOanechoicchamber. Antennamodelname:T613P Issuedate:2024/2/26 Testengineer:PengWang TestEquipmentlist DescriptionManufacturerModelCalDate VectorNetworkAnalyzerAgilentTechnologiesE5071B2023.11.25 AnechoicChamberSATIMOSG162023.11.25 1、Testsystemintroduction 1.1Anechoicchamber OurcompanyhasanumberofanechoicchamberforOTAtest.Itisrangingfrom400MHzto8.5GHz,which canprovidepassivetestandactivetest,includingOTAoverall2G,3G,4G,5GFRtest,WiFimulti-modetest,GPS activetest,Bluetoothactivetest.Thetestsystemcanprovideantennagain,efficiency,radiationpattern,upperand lowerhemisphereefficiencyvaluesandmutualdisturbancecorrelationcoefficientanalysis. 1.2TestsystemArchitecture Thefigureaboveshowstheconnectionandcontrolprocessbetweentheanechoicchamberofourcompanyand thetestingsystemandcomputer.Thetestingsystemhasthecharacteristicsofaccurate,fastandsimpletesting.The operationinterfaceissimpleandhumanized. 2、AntennaLocation 3、AntennaPattern NFCAntenna NFCantennagaindescription: ThedevicedoesnotsupportthetestofNFCgain.Inaddition,allmeasurementswere performedradiatedandthereforeadditionalantennagaindocumentationisnotrequired. 4、Antenna PeakGain ANT0 Antennamodelname:FPC Antennatype:IFA GSMBANDPeakGain(dBi) GSM1800-0.36 GSM1900-0.2 WCDMA BAND PeakGain(dBi) WCDMAB1-0.2 WCDMAB2-0.2 WCDMAB4-0.2 LTEBANDPeakGain(dBi) LTEB1-0.2 LTEB2-0.2 LTEB3-0.36 LTEB4-0.2 LTEB25-0.2 LTEB66-0.2 NRBANDPeakGain(dBi) NRn1 -0.2 NRn2 -0.2 NRn3 -0.36 NRn66 -0.2 Antennagainwasmeasuredintheanechoicchamber,3Dscanwasexercised,andthehighestnumbersarereportedin thisdocument (Rightview–Rearview–Leftview–Frontview) GSM1800/LTEB3/NRN3 GSM1900/LTEB2/WCDMAB2/NRN2 NRN1/LTEB1/WCDMAB1 LTEB4/WCDMAB4 LTEB25 LTEB26/NRN26 ANT3 Antennamodelname:FPC Antennatype:IFA LTEBANDPeakGain(dBi) LTEB7-2.5 LTEB38-2.5 LTEB40-3.8 LTEB41-2.5 NRBANDPeakGain(dBi) NRN7-2.5 NRN38-2.5 NRN40-3.8 NRN41-2.5 NRN7/LTEB7 NRN38/LTEB38 NRN40/LTEB40 NRN41/LTEB41 ANT4 Antennamodelname:FPC Antennatype:IFA GSMBANDPeakGain(dBi) GSM850-5 GSM900-3.6 WCDMA BAND PeakGain(dBi) WCDMAB5 -5 WCDMAB8 -3.6 LTEBANDPeakGain(dBi) LTEB5-5 LTEB8-3.6 LTEB13-5 LTEB17-5 LTEB20-5 LTEB26-5 LTEB28-5 NRBANDPeakGain(dBi) NRN5-5 NRN8-3.6 NRN20-5 NRN26-5 NRN28-5 NRN71-6.3 Antennagainwasmeasuredintheanechoicchamber,3Dscanwasexercised,andthehighestnumbersarereportedinthis document (Rightview–Rearview–Leftview–Frontview) NRN5/LTEB5/WCDMAB5/GSM850 NRN8/LTEB8/WCDMAB8/GSM900 LTEB13 LTEB17 NRN20/LTEB20 NRN26/B26 NRN28/B28 NRN71 ANT6 Antennamodelname:FPC Antennatype:IFA BT/WLANPeakGain(dBi) 2400~2483.5MHz-2.35470~5725MHz-2 5150~5250MHz-15725~5850MHz-3 5250~5350MHz-1GPS-0.5 Antennagainwasmeasuredintheanechoicchamber,3Dscanwasexercised,andthehighestnumbersarereportedin thisdocument (Rightview–Rearview–Leftview–Frontview) WIFI2.4G(2450MHz) WIFI5G(5200MHz) WIFI5G(5300MHz) WIFI5G(5500MHz) WIFI5G(5800MHz) GPS ANT7 Antennamodelname:FPC Antennatype:IFA LTEBANDPeakGain(dBi) LTEB42-2.5 LTEB48-2.6 NRBANDPeakGain(dBi) NRn48-2.6 NRn77-2.5 NRn78-2.7 LTEB42 NRN48/LTEB48 NRN77 NRN78

©Copyright.AllrightsreservedbyCTTL TESTREPORT No.23T04Z80846-10 for TCLCommunicationLtd. GSM/UMTS/LTE/NRMobilephone ModelName:T613P FCCID:2ACCJH182 with HardwareVersion:05 SoftwareVersion:6FSE IssuedDate:2024-02-07 Note: Thetestresultsinthistestreportrelateonlytothedevicesspecifiedinthisreport.Thisreportshallnotbe reproducedexceptinfullwithoutthewrittenapprovalofCTTL. TestLaboratory: CTTL-TelecommunicationTechnologyLabs,CAICT No.52,HuayuanNorthRoad,HaidianDistrict,Beijing,P.R.China100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected],website:www.caict.ac.cn No.23T04Z80846-10 ©Copyright.AllrightsreservedbyCTTL. Page2of16 REPORTHISTORY ReportNumberRevisionDescriptionIssueDate 23T04Z80846-10Rev.01 st edition2024-02-07 Note:thelatestrevisionofthetestreportsupersedesallpreviousversion. No.23T04Z80846-10 ©Copyright.AllrightsreservedbyCTTL. Page3of16 CONTENTS 1.TESTLABORATORY...........................................................................................................................4 1.1.INTRODUCTION&ACCREDITATION...................................................…

Text truncated - open the document above for the full version.