2ACCJH205GSM/UMTS/LTE/NR Mobile phone

TCL Communication Ltd. Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01/02/2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ACCJH205 [TCL Communication Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [TCL Communication Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Ting Wang TCL Communication Ltd. Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01/02/2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2ACCJH205 [TCL Communication Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Ting Wang

Page 1 of 1 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: TCT Mobile (US) Inc. Contact Name: Yao Dai Street Address: 189 Technology Drive City/Province/Zip: Irvine, CA 92618 Telephone No: 1-855-368-0829 Email: [email protected] FRN #: 0033429465 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: October 11, 2025 Signed by (Printed Name/Title): Yao Dai / Technical Acceptance Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TCL Communication Ltd. Grantee Code: 2ACCJ FRN: 0031833205 Contact Name: Wang Ting Street Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong City/Province/Zip: Hongkong Telephone No: +86 13502294537 Email: [email protected] Applicant Signature: Date: 2025-10-11 Signed by (Printed Name/Title): Wang Ting / Product Certification Manager

TCL Communication Ltd. Rev 11/20/07 Date: 01/02/2026 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ACCJH205 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for a period of 180 days: Exhibit Type External Photos Internal Photos Test Setup Photos User Manual Sincerely, (signature) Ting Wang Exhibit Type Block Diagrams Schematics Operational Descriptions Part Lists Software Security Descriptions Tune Up Procedures

TCL Communication Ltd. D:\Projects\Monet NP CAN\05_FCC & IC\FCC IC Letter\1-1 FCC PoA.docx Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 01/02/2026 SUBJECT: FCC Application for FCC ID: 2ACCJH205 To Whom It May Concern: We, the undersigned, hereby authorize Charlie Dai at SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Charlie Dai on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Print Name: Ting Wang Title: Manager Signature: On behalf of Company: TCL Communication Ltd. Telephone: +8613502294537 E-mail: [email protected]

TCL Communication Ltd. E-Label Date: 01/02/2026 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID number Yes Yes 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A / B Digital Device user manual statements* No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment1 No Yes Describe any other FCC regulatory information included in e-label* No * If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device’s surface and information required to be in the manual – refer to KDB 784748 D02 e labelling v02r01. 2. E-label show： TCL Communication Ltd. B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: To access the e-label information, in the device, Settings >System >Regulatory & Safety 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. No special accessories are required. 3. Users are provided specific instructions on how to access the information. The information is provided in user manual. C. Labeling for Importation and Purchasing 1.Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: 1.The FCC ID and/or the SDoC logo (if applicable); and 2.Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts. At the time of importation, marketing, and sale, the device will have the required physical label on the packaging, which will include the device’s FCC ID. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee and secured in such a manner that it cannot be modified by third parties. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Applicable regulatory information not fond in the e-label is contained in the user manual. Print Name: Ting Wang Title: Manager Signature: On behalf of Company: TCL Communication Ltd. Telephone: +8613502294537 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A2 Report No.: SZCR251200564609 Page: 1 of 148 Keny Xu EMC Laboratory Manager SAR TEST REPORT Application No.: SZCR2512005646WM Applicant: TCL Communication Ltd,. Address of Applicant: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Manufacturer: TCL Communication Ltd,. Address of Manufacturer: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong EUT Description: GSM/UMTS/LTE/NR Mobile phone Model No.: T624J FCC ID: 2ACCJH205 Standards: FCC 47CFR §2.1093 Date of Receipt: 2025-12-22 Date of Test: 2025-12-27 to 2026-01-22 Date of Issue: 2026-01-28 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A/2 Report No.: SZCR251200564609 Page: 2 of 148 Revision Record Version Description Date Remark 01 2026-01-28 Authorized for issue by: Charlie Dai/ Project Engineer Roman Pan / Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A/2 Report No.: SZCR251200564609 Page: 3 of 148 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Head Body-worn Hotspot Product specific 10g SAR GSM850 0.89 0.74 0.79 / GSM1900 0.99 0.61 0.61 / WCDMA Band II 1.10 0.52 0.52 / WCDMA Band IV 1.15 0.56 0.56 / WCDMA Band V 0.92 0.43 0.43 / LTE Band 5 1.11 0.76 0.76 / LTE Band 7 1.23 0.77 0.77 / LTE Band 12(17) 0.86 0.41 0.47 / LTE Band 13 0.81 0.62 0.62 / LTE Band 25(2) 0.75 0.57 0.57 / LTE Band 26 0.42 0.44 0.44 / LTE Band 30 0.71 0.53 0.53 / LTE Band 41(38) 1.28 0.78 0.78 / LTE Band 42 0.98 0.28 0.46 / LTE Band 66 0.67 0.56 0.56 / LTE Band 71 0.62 0.41 0.41 / NR Band n2 0.69 0.45 0.45 / NR Band n5 1.15 0.75 0.75 / NR Band n7 1.10 0.64 0.64 / NR Band n25 0.71 0.44 0.44 / NR Band n41(n38) 1.26 0.71 0.71 / NR Band n66 0.78 0.54 0.54 / NR Band n71 0.66 0.38 0.38 / NR Band n77(n78) 0.52 0.51 0.51 / WI-FI (2.4GHz) 0.83 0.41 0.41 / WI-FI (5GHz) 0.74 0.87 0.74 1.56 BT 0.19 <0.10 <0.10 / SAR Limited(W/kg) 1.6 4.0 Maximum Simultaneous Transmission SAR (W/kg) Scenario Head Body-worn Hotspot Product specific 10g SAR Sum SAR 1.57 1.59 1.55 1.56 SPLSR / / / / SPLSR Limited 0.04 0.1 Note：According to TCB workshop (Overlapping LTE Bands): SAR in LTE band 2 is covered by LTE band 25.SAR in LTE band 4 is covered by LTE band 66. SAR in LTE band 17 is covered by LTE band 12. SAR in LTE Band 38 is covered by LTE Band 41.The SAR in NR Band n38 is covered by NR Band n41. The SAR in NR Band n78 is covered by NR Band n77. Because the frequency range is similar, the maximum tuning limit is the same, and the channel bandwidth and other operating parameters for the smaller band is fully supported by the larger band. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01 Rev. A/2 Report No.: SZCR251200564609 Page: 4 of 148 Contents 1 General Information .......................................................................................................... 7 1.1 General Description of EUT ........................................................................................ 7 1.2 Test Specification ....................................................................................................... 10 1.3 RF exposure limits...................................................................................................... 11 1.4 Test Location ............................................................................................................... 12 1.5 Test Engineer .............................................................................................................. 12 1.6 Test Facility ................................................................................................................. 12 2 Laboratory Environment ............................................................................................... 13 3 SAR Measurements System Configuraion ............................................................... 14 3.1 The SAR Measurement System .............................................................................. 14 3.2 Isotropic E-field Proble EX3DV4 .............................................................................. 16 3.3 Data Acquisition Electronics (DAE) ......................................................................... 17 3.4 SAM Twin Phantom ................................................................................................... 17 3.5 ELI Phantom................................................................................................................ 18 3.6 Device Holder for Transmitters ................................................................................ 19 3.7 Measurement Procedure ........................................................................................... 20 3.7.1 Scanning procedure ............................................................................................ 20 3.7.2 Data storage ......................................................................................................... 22 3.7.3 Data Evaluation by SEMCAD ............................................................................ 22 4 SAR measurement variability and uncertainty ....................................................... 24 4.1 SAR measurement variability ................................................................................... 24 4.2 SAR measurement uncertainty ................................................................................ 24 5 Desciption of Test Position .......................................................................................... 25 5.1 The Head Test Position ............................................................................................. 25 5.1.1 SAM Phantom Shape ...................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A03 Rev. A/0 Aug 16,2024 Report No.: SZCR251200564609 Page: 1 of 21 Appendix A Detailed System Check Results 1. System Performance Check System Performance Check 750 MHz Head System Performance Check 835 MHz Head System Performance Check 1750 MHz Head System Performance Check 1950 MHz Head System Performance Check 2300 MHz Head System Performance Check 2450 MHz Head System Performance Check 2600 MHz Head System Performance Check 3400 MHz Head System Performance Check 3500 MHz Head System Performance Check 3700 MHz Head System Performance Check 3900 MHz Head System Performance Check 4100 MHz Head System Performance Check 5250 MHz Head System Performance Check 5600 MHz Head System Performance Check 5750 MHz Head Date: 2026/1/15 Test Laboratory: SGS-SAR Lab System Performance Check 750MHz Head DUT: D750V3; Type: Dipole; Serial: 1160 Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 750 MHz; σ = 0.907 S/m; ε r = 40.674; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(10.5, 11.1, 11.23); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2025/1/20 Phantom: SAM 1; Type: SAM; Serial: 1912 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.53 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 43.35 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 2.91 W/kg SAR(1 g) = 2.03 W/kg; SAR(10 g) = 1.44 W/kg Smallest distance from peaks to all points 3 dB below = 21.8 mm Ratio of SAR at M2 to SAR at M1 = 70.4% Maximum value of SAR (measured) = 2.61 W/kg 0 dB = 2.53 W/kg = 4.04 dBW/kg Date: 2026/1/18 Test Laboratory: SGS-SAR Lab System Performance Check 750MHz Head DUT: D750V3; Type: Dipole; Serial: 1160 Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 750 MHz; σ = 0.886 S/m; ε r = 42.416; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(10.5, 11.1, 11.23); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2025/1/20 Phantom: SAM 1; Type: SAM; Serial: 1912 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.53 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 44.99 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 2.86 W/kg SAR(1 g) = 1.98 W/kg; SAR(10 g) = 1.41 W/kg Smallest distance from peaks to all points 3 dB below = 18.7 mm Ratio of SAR at M2 to SAR at M1 = 70.2% Maximum value of SAR (measured) = 2.56 W/kg 0 dB = 2.53 W/kg = 4.02 dBW/kg Date: 2026/1/9 Test Laboratory: SGS-SAR Lab System Performance Check 835MHz Head DUT: D835V2; Type: Dipole; Serial: 4d105 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 835 MHz; σ = 0.902 S/m; ε r = 41.807; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(10.33, 10.91, 11.04); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2025/1/20 Phantom: SAM 1; Type: SAM; Serial: 1912 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.18 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.53 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 3.72 W/kg SAR(1 g) = 2.49 W/kg; SAR(10 g) = 1.64 W/kg Smallest distance from peaks to all points 3 dB below = 16 mm Ratio of SAR at M2 to SAR at M1 = 67% Maximum value of SAR (measured) = 3.33 W/kg 0 dB = 3.18 W/kg = 5.03 dBW/kg Date: 2026/1/11 Test Laboratory: SGS-SAR Lab System Performance Check 835MHz Head DUT: D835V2; Type: Dipole; Serial: 4d105 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 835 MHz; σ = 0.911 S/m; ε r = 42.973; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(10.33, 10.91, 11.04); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2025/1/20 Phantom: SAM 1; Type: SAM; Serial: 1912 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.12 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 53.03 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 3.68 W/kg SAR(1 g) = 2.48 W/kg; SAR(10 g) = 1.63 W/kg Smallest distance from peaks to all points 3 dB below = 16 mm Ratio of SAR at M2 to SAR at M1 = 67.2% Maximum value of SAR (measured) = 3.30 W/kg 0 dB = 3.12 W/kg = 4.94 dBW/kg Date: 2026/1/18 Test Laboratory: SGS-SAR Lab System Performance Check 1750MHz Head DUT: D1750V2; Type: Dipole; Serial: 1149 Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 1750 MHz; σ = 1.387 S/m; ε r = 40.341; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN3836; ConvF(7.95, 7.95, 7.95); Calibrated: 2025/12/19 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn760; Calibrated: 2025/8/29 Phantom: SAM5; Type: SAM Twin; Serial: 1673 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/d=10mm, Pin=250mW/Area Sc…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A04 Rev. A/0 Aug 16,2024 Report No.: SZCR251200564609 Page: 1 of 61 Appendix B Detailed Test Results 1. GSM GSM850 GSM1900 2. WCDMA WCDMA Band II WCDMA Band IV WCDMA Band V 3. LTE LTE Band 2 LTE Band 5 LTE Band 7 LTE Band 12 LTE Band 13 LTE Band 17 LTE Band 25 LTE Band 26 LTE Band 30 LTE Band 38 LTE Band 41 LTE Band 42 LTE Band 66 LTE Band 71 4. NR n2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZSAR-TRF-01-A04 Rev. A/0 Aug 16,2024 Report No.: SZCR251200564609 Page: 2 of 61 n5 n7 n25 n38 n41 n66 n71 n77 n78 5. WIFI WIFI 2.4G WIFI 5G 6. BT BT Date: 2026/1/9 Test Laboratory: SGS-SAR Lab T624J GSM850 GPRS 3TS 251CH Right tilted Ant0 DUT: T624J; Type: Mobile Phone; Serial: 16819000000070 Communication System: UID 0, GPRS/EGPRS Mode(3up) Communication System (0); Frequency: 848.8 MHz;Duty Cycle: 1:2.77013 Medium: HSL;Medium parameters used: f = 848.8 MHz; σ = 0.912 S/m; ε r = 41.727; ρ = 1000 kg/m 3 Phantom section: Right Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(10.33, 10.91, 11.04); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2025/1/20 Phantom: SAM 1; Type: SAM; Serial: 1912 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.871 W/kg Configuration/Scan/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.45 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 1.55 W/kg SAR(1 g) = 0.768 W/kg; SAR(10 g) = 0.410 W/kg Smallest distance from peaks to all points 3 dB below = 8.7 mm Ratio of SAR at M2 to SAR at M1 = 42.1% Maximum value of SAR (measured) = 1.14 W/kg 0 dB = 0.871 W/kg = -0.60 dBW/kg Date: 2026/1/9 Test Laboratory: SGS-SAR Lab T624J GSM850 GPRS 3TS 251CH Back side 10mm Ant0 DUT: T624J; Type: Mobile Phone; Serial: 16819000000237 Communication System: UID 0, GPRS/EGPRS Mode(3up) Communication System (0); Frequency: 848.8 MHz;Duty Cycle: 1:2.77013 Medium: HSL;Medium parameters used: f = 848.8 MHz; σ = 0.912 S/m; ε r = 41.727; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(10.33, 10.91, 11.04); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2025/1/20 Phantom: SAM 1; Type: SAM; Serial: 1912 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.958 W/kg Configuration/Scan/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.75 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.641 W/kg; SAR(10 g) = 0.371 W/kg Smallest distance from peaks to all points 3 dB below = 10.7 mm Ratio of SAR at M2 to SAR at M1 = 56.9% Maximum value of SAR (measured) = 0.950 W/kg 0 dB = 0.958 W/kg = -0.18 dBW/kg Date: 2026/1/9 Test Laboratory: SGS-SAR Lab T624J GSM850 GPRS 3TS 251CH Top side 10mm Ant0 DUT: T624J; Type: Mobile Phone; Serial: 16819000000237 Communication System: UID 0, GPRS/EGPRS Mode(3up) Communication System (0); Frequency: 848.8 MHz;Duty Cycle: 1:2.77013 Medium: HSL;Medium parameters used: f = 848.8 MHz; σ = 0.912 S/m; ε r = 41.727; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(10.33, 10.91, 11.04); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1267; Calibrated: 2025/1/20 Phantom: SAM 1; Type: SAM; Serial: 1912 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.729 W/kg Configuration/Scan/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.83 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.681 W/kg; SAR(10 g) = 0.387 W/kg Smallest distance from peaks to all points 3 dB below = 9.3 mm Ratio of SAR at M2 to SAR at M1 = 52.7% Maximum value of SAR (measured) = 0.922 W/kg 0 dB = 0.729 W/kg = -1.37 dBW/kg Date: 2026/1/13 Test Laboratory: SGS-SAR Lab T624J GSM1900 GPRS 4TS 512CH Left cheek Ant2 DUT: T624J; Type: Mobile Phone; Serial: 16819000000237 Communication System: UID 0, GPRS/EGPRS Mode(4up) Communication System (0); Frequency: 1850.2 MHz;Duty Cycle: 1:2.07491 Medium: HSL;Medium parameters used: f = 1850.2 MHz; σ = 1.384 S/m; ε r = 40.291; ρ = 1000 kg/m 3 Phantom section: Left Section DASY 5 Configuration: Probe: EX3DV4 - SN3836; ConvF(7.6, 7.6, 7.6); Calibrated: 2025/12/19 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn760; Calibrated: 2025/8/29 Phantom: SAM5; Type: SAM Twin; Serial: 1673 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.08 W/kg Configuration/Scan/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.31 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 0.788 W/kg; SAR(10 g) = 0.427 W/kg Smallest distance from peaks to all points 3 dB below = 10.8 mm Ratio of SAR at M2 to SAR at M1 = 50.1% Maximum value of SAR (measured) = 1.23 W/kg 0 dB = 1.08 W/kg = 0.32 dBW/kg Date: 2026/1/13 Test Laboratory: SGS-SAR Lab T624J GSM1900 GPRS 3TS 810CH Back side 10mm Ant2 DUT: T624J; Type: Mobile Phone; Serial: 16819000000237 Communication System: UID 0, GPRS/EGPRS Mode(3up) Communication System (0); Frequency: 1909.8 MHz;Duty Cycle: 1:2.77013 Medium: HSL;Medium parameters used: f = 1909.8 MHz; σ = 1.405 S/m; ε r = 40.203; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN3836; ConvF(7.6, 7.6, 7.6); Calibrated: 2025/12/19 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn760; Calibrated: 2025/8/2…

Text truncated - open the document above for the full version.

Date: 2026/1/6 Test Laboratory: SGS-SAR Lab T624J 5G NR N77 100M QPSK 1RB1 657200CH Left cheek Ant2 DUT: T624J; Type: Mobile Phone; Serial: 16819000000070 Communication System: UID 0, NR (0); Frequency: 3858 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 3858 MHz; σ = 3.296 S/m; ε r = 37.038; ρ = 1000 kg/m 3 Phantom section: Left Section DASY 5 Configuration: Probe: EX3DV4 - SN3836; ConvF(6.32, 6.32, 6.32); Calibrated: 2025/12/19 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn760; Calibrated: 2025/8/29 Phantom: SAM5; Type: SAM Twin; Serial: 1673 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (13x20x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.860 W/kg Configuration/Scan/Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 2.152 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 1.22 W/kg SAR(1 g) = 0.494 W/kg; SAR(10 g) = 0.212 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 59.3% Maximum value of SAR (measured) = 0.885 W/kg 0 dB = 0.860 W/kg = -0.65 dBW/kg Date: 2026/1/6 Test Laboratory: SGS-SAR Lab T624J 5G NR N77 100M QPSK 135RB69 654800CH Back side 10mm Ant2 DUT: T624J; Type: Mobile Phone; Serial: 16819000000070 Communication System: UID 0, NR (0); Frequency: 3822 MHz;Duty Cycle: 1:1 Medium: HSL;Medium parameters used: f = 3822 MHz; σ = 3.256 S/m; ε r = 37.163; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: Probe: EX3DV4 - SN3836; ConvF(6.32, 6.32, 6.32); Calibrated: 2025/12/19 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn760; Calibrated: 2025/8/29 Phantom: SAM5; Type: SAM Twin; Serial: 1673 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (12x21x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.796 W/kg Configuration/Scan/Zoom Scan (7x7x11)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 2.689 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.14 W/kg SAR(1 g) = 0.426 W/kg; SAR(10 g) = 0.171 W/kg Smallest distance from peaks to all points 3 dB below = 10.3 mm Ratio of SAR at M2 to SAR at M1 = 53.4% Maximum value of SAR (measured) = 0.821 W/kg 0 dB = 0.796 W/kg = -0.99 dBW/kg Date: 2026/1/6 Test Laboratory: SGS-SAR Lab T624J WIFI 2.4G 802.11b 1CH Left cheek Ant7 DUT: T624J; Type: Mobile Phone; Serial: 5672f42c Communication System: UID 0, WI-FI(2.4GHz) (0); Frequency: 2437 MHz;Duty Cycle: 1:1.014 Medium: HSL;Medium parameters used: f = 2437 MHz; σ = 1.802 S/m; ε r = 38.623; ρ = 1000 kg/m 3 Phantom section: Left Section DASY 5 Configuration: Probe: EX3DV4 - SN7620; ConvF(7.28, 7.69, 7.78); Calibrated: 2025/10/22 Sensor-Surface: 1.4mm (Mech…

Text truncated - open the document above for the full version.