2ACCJN067RayNeo X2

Product: RayNeo X Model: 2ARGT78 User Manual Falcon Innovations Falcon XR glasses Portable glasses case Personalized nose pads × 2 Magnetic charging cable Glasses cleaning cloth Diopter adjustment sample Packing List EN1 Instruction Press and hold for 2 s to turn on the glasses. When the glasses are turned on, press and hold the power button for 3 s, and the prompt shutdown or standby will pop up. When the glasses are turned on, press and hold the power button for 8 s, and the glasses are forcibly turned off. Front camera 1 Power button 2 EN2 Tap: Pause. Double-tap: Play the next song. Triple-tap: Play the previous song. Press and hold: Wake up voice assistant. Swipe: Adjust volume/progress bar. Press the power button to wake up the glasses. When you are not wearing the glasses, their Wi-Fi and Bluetooth functions are turned off and they will enter deep sleep. 5 4 3 Wear detection area Touch sensing area on the left Magnetic USB port EN3 Tap: Wake up screen, select/confirm, answer phone, etc. Double tap: Previous step, exit, hang up, etc. Swipe: Select menu. Long press: Wake up the desktop, activate shortcut controls, etc. Battery life: The indicator is orange when the glasses are charging and green when fully charged. Power on: When the glasses are turned on, the indicator is solid blue. Status indicator 7 Touch sensing area on the right 6 EN4 5 EN 1 2 First Use Install and adjust the nose pad to ensure a comfortable wearing experience and a fully visible picture. Myopia/hyperopia adjustment If myopia/hyperopia adjustment is required, contact the channel where you purchased your Falcon Innovations smart glasses. You can also call the Falcon Innovations customer service hotline at 400-901-1000. This table is prepared in accordance with the specifications in SJ/T 11364 Indicates that the content of the hazardous substance in at least one homogeneous material of the component does not exceed the limit specified in GB/T 26572. Hazardous substance name and content in the glasses 6 Hazardous substance Component PbHgCdCr (VI) PBBPBDE Frame Wires Glasses Controller Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572, and currently there is no mature alternative in the industry. But the content of the hazardous substance meets the environmental requirements specified in EU RoHS. Due to differences in product models, the product that you purchased may not include all the above components. EN The number of this label indicates that the product has an environmentally friendly lifespan of 10 years under normal use. Some components may also have such labels, and their environmentally friendly lifespan is subject to the number of the corresponding label. 1. Keep the device dry. Do not use it in dusty, dirty, humid, or environments with high salinity (such as by the sea) to avoid causing circuit faults. 2. Do not use the device during a thunderstorm to avoid device failure or electric shock. 3. Make sure to charge the device through a USB Type-C port and that the port performance complies with relevant specifications of USB Type-C ports. 4. Make sure to use the original charging cable provided by the manufacturer for charging. 5. Do not expose the device to high temperature or place it around heat-generating devices, such as strong sunlight, heaters, microwaves, ovens, or water heaters. The battery may explode in such environments. 6. Do not disassemble or modify the device, or immerse it in water or other liquids to avoid short circuit, battery leakage, overheating, fire or explosion. 7. Do not throw the device into fire. 8. Dispose of the device in accordance with local rules and regulations. Do not dispose of it as household waste. Improper disposal of the device may cause the device to explode. Observe local rules and regulations and support recycling for the disposal of the device and its accessories. 9. Keep the device away from children or pets to avoid causing injury to them. 10. Do not drop, crush, or puncture the device and avoid putting large external stress on it. Doing so may cause damage, failure, short circuit, fire, or explosion. 7 Notice EN 8 11. Do not use unauthorized or incompatible adapters, power supplies, or batteries. Doing so may cause fire, explosion, or other hazards. 12. Keep the device and its accessories out of the reach of children. The device and its accessories may contain some small parts. Children may damage the device and its accessories unintentionally, or swallow small parts that may cause choking or other hazards. 13. The device is equipped with a non-removable built-in battery. Do not replace the battery by yourself to avoid damaging the battery or device. 14. The device is not recommended for children under the age of 13 (subject to the laws of your country) due to children's underdeveloped eyesight. If you are over 13 years old, but have not reached the legal age of majority, you need to use the device under the supervision of a parent or legal guardian. 15. The device is not recommended for people with a history of epilepsy, high blood pressure, heart disease, acrophobia, the pregnant, or others who are not suitable for 3D immersive and stimulating experiences. If you are not a member of these groups but also feel dizzy or suffer eye fatigue during use, stop using the device immediately. 16. Do not use the device at high volume for a long time to avoid damage to your hearing. 17. Do not use the device while driving. EN EN 9 Copyright © Falcon Innovations Technology (Shenzhen) Co., Ltd. 2021 - 2022. All rights reserved. This information is for reference only and does not constitute any form of commitment. The product's characteristics (including but not limited to color, weight, size, screen, etc.) may vary. Make sure to respect people's privacy when shooting with this product. It is prohibited to use this product for any unauthorized surveillance activities, inclu…

Text truncated - open the document above for the full version.

2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:TCLCommunicationLtd. Address:5/F,Building22E,22ScienceParkEastAvenue,HongKongSciencePark,Shatin,NT, We,TCLCommunicationLtd.(“theapplicant”)certifythattheequipmentforwhichauthorizationis soughtthroughcertificationisnot Hong Kong Product Name: RayNeo X2 FCC ID:2ACCJN067 Model(s): ARGT78 2.911(d)(5)(i) Equipment Type :  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:Date:2023.07.06 Title:ProductCertificationManager Companyname:TCLCommunicationLtd. NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:TCLCommunicationLtd. Address:5/F,Building22E,22ScienceParkEastAvenue,HongKongSciencePark,Shatin,NT, Yourssincerely Hong Kong Product Name:RayNeo X2 FCC ID:2ACCJN067 Model(s):ARGT78 2.911(d)(5)(ii) Applicant filing We,TCL Communication Ltd.(“the applicant”) certify that, as of the date of the filing of the application, the applicantis not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. , Name:Date:2023.07.06 TitleandCompanyname:ProductCertificationManager,TCLCommunicationLtd. NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

TO: Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: TCT Mobile (US) Inc. Contact Name: Yao Dai Street Address: 189 Technology Drive City/Province/Zip: Irvine, CA 92618 Telephone No: 1-855-368-0829 Email: [email protected] FRN #: 0033429465 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Yao Dai / Technical Acceptance Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TCL Communication Ltd. Grantee Code: 2ACCJ Contact Name: Annie Jiang Street Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong City/Province/Zip: Hongkong Telephone No: +86 755 36611621 Email: [email protected] Applicant Signature: Date: 2023-6-26 Signed by (Printed Name/Title): Annie Jiang / Product Certification Manager DocuSign Envelope ID: E928EFD3-F956-4FF1-9FB9-50DFDDAD0B2F June 27, 2023

FCCSoftwareConfigurationControlDeclarationRev1.1.docx TCLCommunicationLtd. FCCSoftwareConfigurationControlDeclaration Date:July7,2023 FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Attn:OETDept. Product/ModelNumber: RegardingFCCCountryCodeSelectionguidelinesidentifiedinKDB594280. “Allapplicationsforequipmentauthorizationfortransmittersthatcanhaveradio parameters,orothertechnicalparameters,reportedtotheCommissionsetbysoftware musthaveanattestationindicatingthatnothirdpartywillhavesoftware,orconfiguration control,toprogramthedeviceoutofcomplianceofthetechnicalrulesunderwhichithas beencertified.” Wedeclarethatnothirdpartywillhavesoftware,orconfigurationcontrol,toprogramthedevice outofcomplianceofthetechnicalrulesunderwhichithasbeencertified. Name:AnnieJiangDate:2023.07.06 Title:ProductCertificationManager Signatureofapplicant:

TCLCommunicationLtd. AgentAuthorization Company:TCLCommunicationLtd. Address:5/F,Building22E,22ScienceParkEastAvenue,HongKongSciencePark, Shatin, NT, Hong Kong Product Name:RayNeo X2 WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown Model Number(s):ARGT78 Product Description:RayNeo X2 . Signature:Date: 2023-07-07 Name:AnnieJiang Title:ProductCertificationManager Company:TCLCommunicationLtd.

TCLCommunicationLtd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2023-07-07 Subject; Request for Long Term Confidentiality FCC ID: 2ACCJN067 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. SchematicDiagram BlockDiagram BOM OperationalDescription Tune-upProcedure SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatandcorrespondenceduring thecertificationreviewprocesscannotbegrantedasconfidentialdocumentsandthisinformationwillbe availableforpublicreviewoncethegrantofequipmentauthorizationisissued. Sincerely, Signature: Name:AnnieJiang Title:ProductCertificationManager

Page 1 / 3 EUT Photo EUT Photo Page 2 / 3 EUT Photo EUT Photo Page 3 / 3 EUT Photo EUT Photo

Page 1 / 11 EUT Photo EUT Photo Page 2 / 11 EUT Photo EUT Photo Page 3 / 11 EUT Photo EUT Photo Page 4 / 11 EUT Photo EUT Photo Page 5 / 11 EUT Photo Page 6 / 11 EUT Photo EUT Photo Page 7 / 11 EUT Photo EUT Photo Page 8 / 11 EUT Photo EUT Photo Page 9 / 11 EUT Photo EUT Photo Page 10 / 11 EUT Photo EUT Photo Page 11 / 11 EUT Photo

Product Name：FPC Antenna Model Name：ARGT78 Material：FPC Manufacturer：Zhejiang Haitong communications electronic Co.,Ltd. 1:Chamber room introduction and testing scope Our company has a number of OTA test darkrooms, ranging from 400MHz to 8.5GHz, which can provide passive test and active test (including OTA overall 2G, 3G, 4G, 5GNR test, WIFI multi-mode test, GPS active test, Bluetooth active test, which can provide antenna gain and efficiency. 2D orientation and apple chart analysis and upper and lower hemisphere efficiency values, mutual disturbance correlation coefficient test items. 2:Test system introduction: The figure above shows the connection and control process between the darkroom of our company and the testing system and computer. The testing system has the characteristics of accurate, fast and simple testing. The operation interface is simple and humanized. 3:Antenna size 2.4G Antenna 5G Antenna 4:Antenna information 4.1Antenna Gain 2.4G WIFI/BT ANT Freq Effi Gain (MHz) (dB) (dBi) 2400 -7.11 -1.76 2405 -6.17 -0.89 2410 -6.09 -0.69 2415 -6.32 -1.16 2420 -5.68 -0.6 2425 -5.32 -0.3 2430 -5.52 -0.56 2435 -5.35 -0.46 2440 -5.1 -0.42 2445 -5 -0.34 2450 -5.25 -0.73 2455 -5.44 -1.17 2460 -5.09 -1.1 2465 -5.47 -1.7 2470 -6.02 -2.27 2475 -5.25 -1.75 2480 -5.71 -1.84 5G WIFI ANT Freq Effi Peak Gain Freq Effi Peak Gain (MHz) (dB) (dBi) (MHz) (dB) (dBi) 5150 -6.02 -1.83 5510 -5.35 -0.24 5160 -5.68 -1.18 5520 -5.01 0.67 5170 -5.44 -0.85 5530 -5.6 -0.32 5180 -5.38 -1 5540 -5.32 0.14 5190 -4.66 -0.19 5550 -5.74 -0.47 5200 -4.81 -0.52 5560 -5.31 0.01 5210 -4.52 -0.01 5570 -5.19 0.05 5220 -4.63 -0.12 5580 -5.25 0.16 5230 -4.6 -0.2 5590 -5.19 -0.01 5240 -4.62 -0.34 5600 -5.15 0.21 5250 -4.84 -0.84 5610 -4.91 0.42 5260 -4.75 -1.27 5620 -4.84 0.37 5270 -4.65 -1.33 5630 -5.03 0.11 5280 -4.87 -1.26 5640 -4.59 0.33 5290 -4.72 -1.01 5650 -4.5 0.7 5300 -5.16 -1.4 5660 -4.67 0.16 5310 -4.59 -0.52 5670 -4.75 0.18 5320 -4.28 0.16 5680 -5.05 0.11 5330 -4.6 -0.37 5690 -4.95 0.09 5340 -4.69 0.07 5700 -4.97 0.27 5350 -4.42 0.3 5710 -4.89 0.86 5360 -4.51 0.34 5720 -4.47 1.19 5370 -3.97 1.06 5730 -4.79 1.25 5380 -4.76 0.09 5740 -4.42 1.34 5390 -5.1 0.13 5750 -4.52 1.31 5400 -4.68 0.05 5760 -4.76 1.44 5410 -4.92 0.22 5770 -4.22 1.5 5420 -4.44 0.6 5780 -4.42 1.16 5430 -5.08 0.17 5790 -4.17 1.37 5440 -5.14 -0.2 5800 -4.3 1.18 5450 -5.47 -0.01 5810 -4.65 0.62 5460 -5.29 0.05 5820 -4.32 1.07 5470 -4.97 0.35 5830 -4.5 0.72 5480 -5.33 -0.17 5840 -4.38 0.93 5490 -5.5 -0.34 5850 -4.72 0.56 5500 -5.32 0.03 4.2 Antenna placement: 2G WIFI/BT GPS 5G WIFI 4.3 3D Pattern 2.4G WIFI/BT (Frequency=2425MHz) 5G WIFI (Frequency=5210MHz) 5G WIFI (Frequency=5350MHz) 5G WIFI (Frequency=5720MHz) 5G WIFI (Frequency=5770MHz)

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 54 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:TCLCommunicationLtd. Address: 5/F,Building22E,22ScienceParkEastAvenue,HongKong SciencePark,Shatin,NT,HongKong EUTName:RayNeoX2 BrandName:TCL ModelNumber:ARGT78 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF230522R00301 TestStandards: 47CFRPart2.1093IEEE1528-2013IEEEC95.1-2019 KDB447498D01KDB447498D04KDB865664D01 KDB865664D02KDB248227D01KDB648474D04 KDB690783D01 FCCID:2ACCJN067 TestConclusion:Pass TestDate:2023-05-25 DateofIssue:2023-06-26 PreparedBy: MonicaZhou/ProjectEngineer Date:2023-06-26 ApprovedBy: Ryan.CJ/EMCManager Date:2023-06-26 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF230522R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 54 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-06-26Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF230522R00301 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 54 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction.................................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory..............................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation....................................................................................................................4 1.3LaboratoryCondition......................................................................................................................................................................4 1.4Announcement.................................................................................................................................................................................4 2.ProductInformation...................................................................................................................................................................................5 2.1ApplicationInformation...................................................................................................................................................................5 2.2ManufacturerInformation...............................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT)................................................................................................................5 2.5EquipmentunderTestAncillaryEquipment................................................................................................................................5 2.6TechnicalInformation.....................................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................................6 3.1TestStandards................................................................................................................................................................................6 3.2DeviceCategoryandSARLimit...................................................................................................................................................7 3.3TestResultSummary.....................................................................................................................................................................7 3.4TestUncertainty..............................................................................................................................................................................8 4.MeasurementSystem.............................................................................................................................................................................10 4.1SpecificAbsorptionRate(SAR)Definition................................................................................................................................10 4.2MVGSARSystem.........................................................................................................................................................................10 5.SystemVerification..................................................................................................................................................................................14 5.1PurposeofSystemCheck......................................…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 217 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong EUT Name: RayNeo X2 Model Number: ARGT78 Series Model Number: Refer to Section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230717R01604 Test Standards: 47 CFR Part 15E Test Conclusion: Pass FCC ID: 2ACCJN067 Test Date: 2023-05-10 to 2023-07-26 Date of Issue: 2023-07-26 Prepared By: elma.yang / Project Engineer Date: 2023-07-26 Approved By: Ryan.CJ / EMC Manager Date: 2023-07-26 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number:BTF230717R01604 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 217 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-07-26 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number:BTF230717R01604 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 217 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ................................................................................................................................................. 5 1.1 Identification of Testing Laboratory ................................................................................................... 5 1.2 Identification of the Responsible Testing Location .......................................................................... 5 1.3 Announcement...................................................................................................................................... 5 2 PRODUCT INFORMATION ................................................................................................................................. 6 2.1 Application Information ....................................................................................................................... 6 2.2 Manufacturer Information .................................................................................................................... 6 2.3 Factory Information .............................................................................................................................. 6 2.4 General Description of Equipment under Test (EUT) ....................................................................... 6 2.5 Technical Information .......................................................................................................................... 6 3 SUMMARY OF TEST RESULTS ......................................................................................................................... 8 3.1 Test Standards ...................................................................................................................................... 8 3.2 Uncertainty of Test ............................................................................................................................... 8 3.3 Summary of Test Result....................................................................................................................... 8 4 TEST CONFIGURATION .................................................................................................................................... 9 4.1 Test Equipment List ............................................................................................................................. 9 4.2 Test Auxiliary Equipment ...................................................................................................................13 4.3 Test Modes ..........................................................................................................................................13 5 EVALUATION RESULTS (EVALUATION) ........................................................................................................14 5.1 Antenna requirement .........................................................................................................................14 5.1.1 Conclusion:..............................................................................................................................14 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) ......................................................................................15 6.1 Conducted Emission at AC power line ............................................................................................15 6.1.1 E.U.T. Operation: .....................................................................................................................15 6.1.2 Test Setup Diagram: ................................................................................................................15 6.1.3 Test Data: .........................................................................................…

Text truncated - open the document above for the full version.

Test Report Number: BTF230717R01604 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 101 of 217 BTF Testing Lab (Shenzhen) Co., Ltd.8 F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 2. Bandwidth 2.1 OBW 2.1.1 Test Result Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result 802.11a SISO 5180 1 16.346 -- 5200 1 16.348 -- 5240 1 16.340 -- 5260 1 16.357 -- 5300 1 16.358 -- 5320 1 16.327 -- 5500 1 16.347 -- 5580 1 16.345 -- 5700 1 16.359 -- 5745 1 16.337 -- 5785 1 16.320 -- 5825 1 16.338 -- 802.11n (HT20) SISO 5180 1 17.560 -- 5200 1 17.555 -- 5240 1 17.556 -- 5260 1 17.551 -- 5300 1 17.558 -- 5320 1 17.556 -- 5500 1 17.558 -- 5580 1 17.557 -- 5700 1 17.533 -- 5745 1 17.535 -- 5785 1 17.545 -- 5825 1 17.550 -- 802.11n (HT40) SISO 5190 1 35.994 -- 5230 1 35.970 -- 5270 1 36.018 -- 5310 1 36.016 -- 5510 1 35.991 -- 5550 1 35.967 -- 5670 1 36.001 -- 5755 1 35.947 -- 5795 1 35.970 -- 11AC20 SISO 5180 1 17.551 -- 5200 1 17.564 -- 5240 1 17.551 -- 5260 1 17.566 -- 5300 1 17.553 -- 5320 1 17.537 -- 5500 1 17.550 -- 5580 1 17.549 -- 5700 1 17.546 -- 5745 1 17.539 -- 5785 1 17.526 -- 5825 1 17.553 -- 11AC40 SISO 5190 1 36.010 -- 5230 1 36.013 -- 5270 1 35.997 -- Test Report Number: BTF230717R01604 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 102 of 217 BTF Testing Lab (Shenzhen) Co., Ltd.8 F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 5310 1 36.018 -- 5510 1 36.020 -- 5550 1 36.014 -- 5670 1 36.007 -- 5755 1 35.979 -- 5795 1 35.947 -- 11AC80 SISO 5210 1 75.393 -- 5290 1 75.408 -- 5530 1 75.390 -- 5610 1 75.339 -- 5775 1 75.379 -- 11AC160 SISO 5250 1 154.33 -- 5250_UNII-1 1 77.184 -- 5250_UNII-2A 1 77.146 -- 5570 1 154.26 -- Test Report Number: BTF230717R01604 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 103 of 217 BTF Testing Lab (Shenzhen) Co., Ltd.8 F…

Text truncated - open the document above for the full version.