2ACCP-HDP200Pocket Projector

FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the i nterference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Shenzhen Heng feng rui Electronics Co., Ltd PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date: 19.05.2014 Authority to Act as an Agent We declare that the following representative (agent) Name Mark Wen Position General Manager Company Name Most Technology Service Co., Ltd. Address No.5, 2 nd Langshan Road, North District, Hi-Tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel / Fax 86-755-86170306/86-755-86170310 E-Mail [email protected] to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name Pocket Projector Model Name HDP200 Brand Name N/A Yours sincerely, Signatory Name Philo Yuan Position Company Name Shenzhen Heng feng rui Electronics Co., Ltd Address 4 floor,10 buiding,Hongfa industrial park,Shixin community,Shiyan street, Baoan Tel / Fax +86-755-27629579 E-Mail In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance.

Shenzhen Heng feng rui Electronics Co., Ltd Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Company name: Shenzhen Heng feng rui Electronics Co., Ltd FCC ID: 2ACCP-HDP200 FCC Part 15 Certification Gentlemen, Pursuant to 47 CFR 0.457(d)(1)(ii) and 0.459 we hereby requests permanent confidentiality of the following documents for the subject application: Exhibit Type Description ☒ Schematics All circuitry of devices and component values ☒ Block Diagrams Details of device showing the frequency of all oscillators ☐ Bill Of Materials Parts list of the product for the radio device ☒ Operational Description Description of the circuit functions Note: Exhibit types that are commonly held confidential are: (1) Schematics, (2) Block Diagrams, (3) Bill Of Materials, (4) Operational Descriptions. Any exhibit NOT granted confidentiality is viewable on the FCC website as soon as a grant is issued. These documents contain detailed system and equipment description and related information about the product which we considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, we consider that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours sincerely, Signatory Name Philo Yuan Position Company Name Shenzhen Heng feng rui Electronics Co., Ltd Address 4 floor,10 buiding, Hongfa industrial park,Shixin community,Shiyan street, Baoan Tel / Fax +86-755-27629579 E-Mail

Model No.: HDP200 Page 1 of 4 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Model No.: HDP200 Page 2 of 4 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Model No.: HDP200 Page 3 of 4 TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE Model No.: HDP200 Page 4 of 4 PHOTO OF THE ENTIRE SAMPLE-1

FCC ID Label Location

Model No.: HDP200 Page 1 of 7 INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 Model No.: HDP200 Page 2 of 7 INTERNAL PHOTO OF SAMPLE –3 INTERNAL PHOTO OF SAMPLE –4 Model No.: HDP200 Page 3 of 7 INTERNAL PHOTO OF SAMPLE –5 INTERNAL PHOTO OF SAMPLE –6 Model No.: HDP200 Page 4 of 7 INTERNAL PHOTO OF SAMPLE –7 INTERNAL PHOTO OF SAMPLE –8 Model No.: HDP200 Page 5 of 7 INTERNAL PHOTO OF SAMPLE –9 INTERNAL PHOTO OF SAMPLE –10 Model No.: HDP200 Page 6 of 7 INTERNAL PHOTO OF SAMPLE –11 INTERNAL PHOTO OF SAMPLE –12 Model No.: HDP200 Page 7 of 7 INTERNAL PHOTO OF SAMPLE –13 INTERNAL PHOTO OF SAMPLE –1

FCC 47 CFR PART 15 SUBPART C TEST REPORT For Applicant: Shenzhen Heng feng rui Electronics Co.,Ltd. Address: 4 floor,10 buiding,Hongfa industrial park,Shixin community,Shiyan street,Baoan district,Shenzhen city Product Name: Pocket Projector Model Name: HDP200 Brand Name: N/A FCC ID: 2ACCP-HDP200 Report No.: MTE/SAL/F14050476 Date of Issue: May 15, 2014 Issued by : Most Technology Service Co., Ltd. Address : No.5, Langshan 2nd Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 53 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: 2ACCP-HDP200 Report No.: MTE/SAL/F14050476 Page 2 of 53 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY.......................................................................................... 4 2. GENERAL INFORMATION....................................................................................................... 5 2.1 Product Information ................................................................................................................ 5 2.2 Objective ................................................................................................................................ 6 2.3 Test Standards and Results .................................................................................................... 6 2.4 Environmental Conditions....................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY ......................................................................................... 6 3. TEST FACILITY........................................................................................................................ 7 3.1TEST FACILITY....................................................................................................................... 7 3.2 Test Conditions ....................................................................................................................... 7 3.3 Channel List ........................................................................................................................... 8 3.4 Description of Test Modes ...................................................................................................... 8 3.5 Table of Parameters of Text Software Setting......................................................................... 9 3.6 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS............................................. 10 4. SETUP OF EQUIPMENT UNDER TEST.................................................................................11 4.1 SUPPORT EQUIPMENT .......................................................................................................11 4.2 TEST EQUIPMENT LIST...................................................................................................... 12 5. 47 CFR Part 15C 15.249 Requirements................................................................................. 13 5.1 Spurious Emission Test ........................................................................................................ 13 5.1.1 Requirement...................................................................................................................... 13 5.1.2 Test Description ................................................................................................................. 14 5.1.3 Test Description ................................................................................................................. 15 5.1.5 Test Result .....................................................................................................................16 5.2 Band Edge............................................................................................................................ 28 5.2.1 Requirement...................................................................................................................... 28 5.2.2 Test Description ................................................................................................................. 28 5.2.3Test Result.......................................................................................................................... 28 5.3 LINE CONDUCTED EMISSION TEST................................................................................. 41 5.3.1. LIMITS OF LINE CONDUCTED EMISSION TEST........................................................... 41 5.3.2. BLOCK DIAGRAM OF TEST SETUP............................................................................... 41 5.3.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ...................... 42 5.3.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST .................................... 42 5.3.5. Test result ......................................................................................................................... 42 5.3.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST .............................................. 42 5.4 20 dB Bandwidth .................................................................................................................. 45 5.4.1 Definition ........................................................................................................................... 45 FCC ID: 2ACCP-HDP200 Report No.: MTE/SAL/F14050476 Page 3 of 53 5.4.2 Block Diagram Of Test Setup ............................................................................................ 45 5.4.3 Test Result.......................................................…

Text truncated - open the document above for the full version.

Model No.: HDP200 CE TEST SETUP RE TEST SETUP Model No.: HDP200 SPURIOUS EMISSION TEST SETUP