2ACCRMC10Bluetooth Module

Shanghai Ehong Technologies Inc EH-MC10 Bluetooth® technol ogy low energy module • Bluetooth® radio - Fully embedded Bluetooth® v4.0 single mode - TX power +6 dbm,-92.5dbm RX sensitivity - 128-bit encryption security - Range up to 100m - Integrated chip antenna or U.FL port - Multipoint capability(2devices at master) • Support profiles - BLE (Master and slave) - The generic attribute profile (GATT) - Health care, Sports and fitness, Proximity sensing profiles - Alerts and timer profiles • User interface - Send AT command over UART - Firmware upgrade over the air (OTA) - Transmit data: 300kbps transmission speed (UART) - I2C interface(Master ) - SPI - PWM(4 channel) • General I/O - 10 general purpose I/Os - 3 analogue I/O (10bit ADC) • FCC and Bluetooth® qualified • Single voltage supply: 3.3V typical • Small form factor: 17.70 x 11.95x 2.2mm • Operating temperature range: -30 °C to 80 °C Version 2.0 July 21 2014 Bluetooth Low Energy Module Shanghai Ehong Technologies Co., Ltd 1. Contents 1. Description .................................................................................................................................................. 3 2. Applications ................................................................................................................................................ 4 3. EH-MC10 Product numbering .................................................................................................................. 4 4. Electrical Characteristics ......................................................................................................................... 4 4.1. Recommended Operation Conditions ................................................................................................. 4 4.2. Absolute Maximum Rating ................................................................................................................... 5 4.3. Input/Output Terminal Characteristics ................................................................................................ 5 4.4. Power Consumption ............................................................................................................................. 6 5. Pinout and Terminal Description ............................................................................................................. 7 5.1. Pin Configuration .................................................................................................................................. 7 6. Physical Interfaces .................................................................................................................................... 9 6.1. Power Supply ........................................................................................................................................ 9 6.2. PIO......................................................................................................................................................... 9 6.3. AIO......................................................................................................................................................... 9 6.4. PWM ...................................................................................................................................................... 9 6.5. UART ................................................................................................................................................... 10 6.6. I2C Master........................................................................................................................................... 10 6.7. SPI Master .......................................................................................................................................... 10 6.8. SPI Debug ........................................................................................................................................... 11 7. Reference Design ..................................................................................................................................... 11 8. Layout and Soldering Considerations ................................................................................................. 11 8.1. Soldering Recommendations ............................................................................................................ 11 8.2. Layout Guidelines ............................................................................................................................... 12 9. Mechanical and PCB Footprint Characteristics ................................................................................. 13 10. Reflow Profile ........................................................................................................................................ 14 11. Contact Information ............................................................................................................................. 15 Bluetooth Low Energy Module Shanghai Ehong Technologies Co., Ltd 2. Table of Tables TABLE 1: RECOMMENDED OPERATION CONDITIONS ............................................................................................... 4 TABLE 2：ABSOLUTE MAXIMUM RATING ................................................................................................................ 5 TABLE 3: DIGITAL I/O CHARACTERISTICS ............................................................................................................... 5 TABLE 4: AIO CHARACTERISTICS ........................................................................................................................... 5 TABLE 5 ESD PROTECTION ................................................................................................................................... 6 TABLE 6: CURRENT CONSUMPTION ........................................................................................................................ 6 TABLE 7：PIN TERMINAL DES…

Text truncated - open the document above for the full version.

Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: ShangHai Ehong Technology Co.,Ltd. FCC ID: 2ACCRMC10 Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v01r04’ ShangHai Ehong Technology Co.,Ltd. has been examined against the following requirements. Essential Elements of 15.212(a)(1) Yes No 1, The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly Yes, It is fulfilled.The modular transmitter has own shielding. Shielding is show on external photos 2, The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Yes, It is fulfilled.The module have buffered modulation/data inputs It is transmitting using GFSK modulation. 3, The module must contain power supply regulation on the module Yes, It is fulfilled.The module transmitter have its own power supply regulation (DC 3.3V by itself) 4, The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Yes, It is fulfilled. The modular comply with antenna requirements .( Ceramic antenna) 5, The module must demonstrate compliance in a stand-alone configuration Yes, It is fulfilled.The modular was tested in a atand-alone configuration. Please see the setup photos and test jig photo. 6, The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes, It is fulfilled. The label is shown on transmitter modular, Please see the label view. 7, The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee Yes, It is fulfilled.The operation description and user guides provide this detail. 8, The module must comply with RF exposure requirements Yes, It is fulfilled.The modular is exempted due to its low field strength. Sincerely, Name: Tony Tang Title: Manager

3/12/2015 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Company name: < ShangHai Ehong Technology Co.,Ltd. > FCC ID: 2ACCRMC10 FCC Part 15 Certification Gentlemen, Pursuant to 47 CFR 0.457(d)(1)(ii) and 0.459 < ShangHai Ehong Technology Co.,Ltd. > hereby requests permanent confidentiality of the following documents for the subject application: Exhibit Type File Name Description Block Diagram Block Diagram Block Diagram Operational Description Operational Description Operational Description Schematics Schematics Schematics Parts / BOM Parts / BOM Parts / BOM Note: Any exhibit NOT granted Confidential status is viewable on the FCC website as soon as the Grant is issued. Reason why the material should be withheld from public inspection: These documents contain detailed system, equipment description and related information about the product which < ShangHai Ehong Technology Co.,Ltd. > considers proprietary, confidential, and a custom design not otherwise available to the general public. State why the information is a “trade secret;” Since the design is a basis from which future products will evolve, < ShangHai Ehong Technology Co.,Ltd. > considers that this information would be of significant benefit to its competitors and that disclosure would give competitors an unfair advantage in the marketplace. Trade secret” information is information which is not generally known or reasonably ascertainable, by which a business can obtain an economic advantage over competitors. The information is not normally released to any party or person outside the company. Sincerely, Signature: Name: Tony Tang Company: ShangHai Ehong Technology Co.,Ltd. Title: Manager Date: Mar.03,2015

ShangHai Ehong Technology Co.,Ltd. Suite501, No.3 building, No.439 Jinglian road, Minhang district, Shanghai, China Letter of Authorization Company: ShangHai Ehong Technology Co.,Ltd. Address: Suite501, No.3 building, No.439 Jinglian road, Minhang district, Shanghai, China Product Name: Bluetooth Module Model Number: EH-MC10 We authorize MiCOM Labs, 440 Boulder Court, Suite 200, Pleasanton, CA 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. This shall include the following:  Testing  Approval applications (includes complete product documentation package, including Confidential information) and procedures  Payment of approval fees We declare that MiCOM Labs, 440 Boulder Court, Suite 200, Pleasanton, CA 94566, USA, is allowed to forward all information related to the approval project to the applied notified body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Tony Tang Date: Mar.03,2015 Title: Manager Signature of applicant:

FCC ID:2ACCRMC10 Copyright of this report is owned by Centre of Testing Service and may not be reproduced other than in full except with the written approval of the issuing Company. CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Tel：+86-20-85543113 (32 lines) Fax：+86-20-38780406 Complaint line：+86-20-85533471 E-mail：[email protected] See Reverse For Terms And Conditions of Service Report No.: CGZ3150306-00214-EF Page 1 of 1 1.External Photos of the EUT External view-1 External view-2

FCC ID:2ACCRMC10 Copyright of this report is owned by Centre of Testing Service and may not be reproduced other than in full except with the written approval of the issuing Company. CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Tel：+86-20-85543113 (32 lines) Fax：+86-20-38780406 Complaint line：+86-20-85533471 E-mail：[email protected] See Reverse For Terms And Conditions of Service Report No.: CGZ3150306-00214-EF Page 1 of 1 LABEL PHOTOGRAPHS Label Location 15MM 25MM

CENTRE OF TESTING SERVICE INTERNATIONAL OPERATE ACCORDING TO ISO/IEC 17025 FCC ID TEST REPORT TEST REPORT NUMBER : CGZ3150306-00214-EF CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China FCC ID:2ACCRMC10 Copyright of this report is owned by Centre of Testing Service and may not be reproduced other than in full except with the written approval of the issuing Company. CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Tel：+86-20-85543113 (32 lines) Fax：+86-20-38780406 Complaint line：+86-20-85533471 E-mail：[email protected] See Reverse For Terms And Conditions of Service Report No.: CGZ3150306-00214-EF Page 1 of 29 TEST REPORT For FCC ID 47 CFR PART 15 OCT, 2014 Report Reference No. .................... CGZ3150306-00214-EF Date of issue..................................... 11 March 2015 Testing Laboratory Name .............. CENTRE OF TESTING SERVICE CO., LTD. Address............................................. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Testing location/ procedure .............. Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s name ............................ ShangHai Ehong Technology Co.,Ltd. Address............................................. Suite501, No.3 building, No.439 Jinglian road, Minhang district, Shanghai, China Test specification ........................... Standard ........................................... 47 CFR PART 15 OCT, 2014 Test Report Form No. ....................CTSEMC-1.0 TRF Originator.................................. CENTRE OF TESTING SERVICE CO., LTD. Master TRF .......................................Dated 2009-01 CENTRE OF TESTING SERVICE CO., LTD. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the CENTRE OF TESTING SERVICE CO., LTD is acknowledged as copyright owner and source of the material. CENTRE OF TESTING SERVICE CO., LTD takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description.....................: Bluetooth Module Trade Mark....................................... Ehong Manufacturer.................................... Zhejiang Techain Electronics Technology Co., Ltd. Model/Type reference...................... EH-MC10 Ratings.............................................DC 3.3V Operating Frequency ........................ 2402.0MHz ~2480.0MHz Result ............................................... Positive Compiled by: Supervised by: Approved by: Kate zhang / Fileadministrators Duke yang / Technique principal Vincent yao / Manager FCC ID:2ACCRMC10 Copyright of this report is owned by Centre of Testing Service and may not be reproduced other than in full except with the written approval of the issuing Company. CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Tel：+86-20-85543113 (32 lines) Fax：+86-20-38780406 Complaint line：+86-20-85533471 E-mail：[email protected] See Reverse For Terms And Conditions of Service Report No.: CGZ3150306-00214-EF Page 2 of 29 FCC ID -- T E S T R E P O R T Test Report No. : CGZ3150306-00214-EF 11 March 2015 Date of issue Type / Model............................ EH-MC10 EUT.......................................... Bluetooth Module Applicant........................... ShangHai Ehong Technology Co.,Ltd. Address.................................... Suite501, No.3 building, No.439 Jinglian road, Minhang district, Shanghai, China Telephone................................ +86-021-61139798 Fax........................................... +86-021-61263536 Contact..................................... Tony Tang Manufacturer...................... Zhejiang Techain Electronics Technology Co., Ltd. Address.................................... No.1052, Yatai RD., Nanhu District, Jiaxing city, Zhejiang Telephone................................ / Fax........................................... / Contact..................................... / Factory............................... Zhejiang Techain Electronics Technology Co., Ltd. Address.................................... No.1052, Yatai RD., Nanhu District, Jiaxing city, Zhejiang Telephone................................ / Fax........................................... / Contact..................................... / Test Result according to the standards on page 1:PASSED The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. FCC ID:2ACCRMC10 Copyright of this report is owned by Centre of Testing Service and may not be reproduced other than in full except with the written approval of the issuing Company. CENTRE OF TESTING SERVICE CO., LTD. A101，No.65，Zhuji Highway,Tianhe District，Guangzhou, China Tel：+86-20-85543113 (32 lines) Fax：+86-20-38780406 Complaint line：+86-20-85533471 E-mail：[email protected] See Reverse For Terms And Conditions of Service Report No.: CGZ3150306-00214-EF Page 3 of 29 TABLE OF CONTENTS Description Page 1.TEST STANDARDS........................................................................................................................................5 2.SUMMARY......................................................................................................................................................5 2.1 GENERAL REMARKS .......................................................................................................................................5 2.2 FINAL ASSESSMENT........................................................................................................................................5 3.EQUIPMENT UNDER TEST .........................................................................…

Text truncated - open the document above for the full version.