2ACFJIWB-PC01PC

1 INTERACTIVE WHITE BOARD INTERACTIVE WHITE BOARD PC MODULE IWB‐PC01 2 INTERACTIVE WHITE BOARD PC MODULE IWB-PC01 OPERATING INSTRUCTION Before operating the unit, please read this manual thoroughly, and retain it for future reference. Shielded HDMI Cable and shielded VGA Cable with two ferrite cores must be used to comply with the FCC Part 15 Class B limit. User will get these two cables without additional charge from the distributor. Contents Safety Precautions Operation Guidance 1) Power Supply 2) LCD Screen Model 3) Before Installation 4) Installation Specification Internal PC Basic Operation Windows Operation System Active 3 Safety Precautions For safety purposes, carefully read through and observe these safety precautions. Unless otherwise specified, "device", as used in this document, indicates the device and all accessories. Basic Precautions . z Keep the device dry and prevent collision with other objects during storage, transportation, and operation z Do not attempt to dismantle the device. Should any fault develop requiring technical assistance, contact an authorized maintenance center. z Without WD prior written consent, no organization or individual is permitted to make an y changes to the stru cture or design of the device. z While using the device, observe all applicable laws, directives arid regulations while ensuring such usage does not infringe on the legal rights of any other party. Environmental Precautions z Keep the device away from heat sources and open flames, such as an electric heater or candle z Keep the device away from any household appliances with strong magnetic or electric fields, such as a microwave oven, refrigerator or mobile phone. Place the device on a stable surface. z Follow the manufactures instructions carefully when installing the device. z Place the device in a well‐ventilated area out of direct sunlight. z Do not place any objects, such as a candle or a water container, or the top of the device. If a foreign objector liquid gets into the devi ce, disconnect the power su pply immediately and unplug all the cables connected to the device. After ensuring power is completely cut off from the device, contact an authorized maintenance center. z Do not place the device near a water source or in a damp area. z Keep the device clean, free of du st and stains. z Do not place the device on or near in flammable materials such as foam. Operating Precautions z Do not allow children to play with the device or its accessories. Swallowing the accessories may be fatal. z Use only the provided accessories, such as the power adapter and battery, or those recommended by the manufacturer. z Make sure that the device does not get wet If water gets into the device, disconnect the power supply immediately and unplug all the cables connected to the device, such as the power cable and network cable. After ensuring power is completely cut off from the device, contact an authorized main tenance center. z The power supply of the device must meet the input voltage specifications of the device. 4 z Before plugging or unplugging any cables, shut down the device and disconnect the power supply. z While plugging or unplugging any cables, make sure that your hands are dry. z Do not step on, pull, or stretch any cables as doing so may damage the cables or cause the device to malfunction. z Do not use old or dama ged cab les. z Before using the device, ensure that the power supply in your home is properly grounded. Note that the ground cable must not be connected to the neutral wire of the power supply. z Ensure that the signal wire does not c arry current, that the signal wire shielding is pr operly grounded, and that the power supply protection ware is grounded as failure to do so may result in an electrical fire. z Before using the device, ensure that the appliances and network cable connected to the device are grounded properly. A sp litter is recomme nded to connect devices. z Keep the power plug clean and dry, to prevent electric shock or other injuries. z During a thunderstorm, disconnect the device from the power supply and unplug all the cables that are connected to the device, such as the power cable z If the de vice will not be used fo r a long time, power off the device, disconnect the power supply, and unplug all the cables connected to the device, such as the power cable z Do not look into the infrared transmitting interface on the remote control without eye protection z If smoke, noise, or odor is e mitted from the devic e, stop using mid power off the device immediately, disconnect the power supper and unplug all cables, such as the power cable and network cable. Contact an authorized maintenance center for repair. z Make sure that no objects (such as metal shavings) enter the device thr ough the heat dissip ation vent z Do not scratch or otherwise damage the shell of the device. Flaking or peeling of the paint may lead to skin allergy or malfunctions of the device. If paint peels or flakes drops into the device, a short circuit may occur z If th e device's fuse burns out rep l ace it with a fuse of the same model and specifications Cleaning Precautions z Before cleaning the device, power it off, disconnect the power supply and unplug all cables connected to the device, such as the power cable and network cable. z Do not cleaning the device, with any cleaning solution or cleanser spray. Use a piece of soft cloth to gently wipe down the device if du sty or smudg ed. Environmental Protection Do not dispose of the device in a garbage can. The device, packing materials, batteries, and any discarded components or units must be disposed of in accordance with local regulations in order to support recycling activities. 5 OPERATION QUIDANCE 1 Power Supply This PC module is designed to WD Interactive White Board & with install designated configuration, Other LED back-light LCD monitor of Westinghouse products, or other display is not possible to concerned. The Power is supplie…

Text truncated - open the document above for the full version.

1 [June 8, 2014] To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: 2ACFJIWB-PC01 Request is hereby submitted by SCT DIGITAL TECHNOLOGY CO., LTD. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and SCT DIGITAL TECHNOLOGY CO., LTD. reserves the right to discern which parties can obtain access to these information: Detailed Block diagrams The rationale for request for confidentiality is as followings: This information represents intellectual property of SCT DIGITAL TECHNOLOGY CO., LTD. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards,

External Photos shielded cables Photos

Label Artwork FCC ID: 2ACFJIWB-PC01 Label Size: 60mm (wide) x 35mm (high) Label Location

Internal Photos

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_PC_b Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com SCT DIGITAL TECHNOLOGY CO., LTD. Application For Certification FCC ID: 2ACFJIWB-PC01 Product description: PC Model: IWB-PC01 Additional Model: LB-PC01, SCT-PC01 Class B Personal Computer Report No.: 140515018SZN-001 Prepared and Checked by: Approved by: Sign on file Sen Lv Project Engineer Andy Yan Project Engineer Date: June 10, 2014 INTERTEK TESTING SERVICES TRF No.: FCC 15C_PC_b FCC ID: 2ACFJIWB-PC01 Report No.: 140515018SZN-001 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labeling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Confidentiality Request EXHIBIT 10: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_PC_b FCC ID: 2ACFJIWB-PC01 Report No.: 140515018SZN-001 ii MEASUREMENT / TECHNICAL REPORT SCT DIGITAL TECHNOLOGY CO., LTD. MODEL: IWB-PC01 Additional Model: LB-PC01, SCT-PC01 FCC ID: 2ACFJIWB-PC01 This report concerns (check one:) Original Grant X Class II Change Equipment Type: JBC- Part 15 Class B Computing Device/Personal Computer Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart B for unintentional radiator − the new 47 CFR [10-01-13 Edition] provision. Report prepared by: Sen Lv Intertek Test Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8614 0653 Fax: (86 755) 8614 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_PC_b FCC ID: 2ACFJIWB-PC01 Report No.: 140515018SZN-001 iii Table of Contents 1.0 General Description ......................................................................................... 2 1.1 Product Description ................................................................................... 2 1.2 Related Submittal(s) Grants ...................................................................... 2 1.3 Test Methodology ...................................................................................... 2 1.4 Test Facility ............................................................................................... 2 2.0 System Test Configuration ............................................................................. 4 2.1 Justification ............................................................................................... 4 2.2 EUT Exercising Software .......................................................................... 4 2.3 Special Accessories .................................................................................. 4 2.4 Equipment Modification ............................................................................. 5 2.5 Measurement Uncertainty ......................................................................... 5 2.6 Support Equipment List and Description ................................................... 5 3.0 Emission Results .............................................................................................. 7 3.1 Field Strength Calculation ............................................................................. 8 3.2 Radiated Emission Configuration Photograph ............................................... 9 3.3 Radiated Emission Data ............................................................................... 9 3.4 Conducted Emission Configuration Photograph .......................................... 12 3.5 Conducted Emission Data .............................................................................. 12 4.0 Equipment Photographs ................................................................................... 16 5.0 Product Labelling .............................................................................................. 18 6.0 Technical Specifications ................................................................................... 20 7.0 Instruction Manual ............................................................................................ 22 8.0 Miscellaneous Information ............................................................................... 24 8.1 Emissions Test Procedures ..........................................…

Text truncated - open the document above for the full version.

Radiated Emission

Conducted Emission