
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Thank you for purchasing your My Little Pony Night Talkies. You can use these walkie talkies to easily talk to your friends at distances up to 65 meters away, while the built in flashlight helps you see in the dark. For best results, read this instruction manual first before using. -Two Walkie Talkies -Instruction Manual with Warranty Information Each walkie talkie requires six AAA batteries for power. To insert or replace batteries, use a screwdriver to remove the screw on the battery compartment door. Note that the battery compartment is located on the rear of each walkie talkie. Once the battery compart- ment is open, insert batteries with the correct polarity (+,-) as displayed in the battery compartment. Once the batteries have been inserted, close the battery compartment, and once again use a screwdriver to screw the battery compartment door in place. Once batteries are inserted you can follow the steps below to use your walkie talkies: 1. Slide the ON/OFF Switch on each walkie talkie to the ON position. 2. Hold one walkie talkie close to your mouth. 3. Press the PUSH TO TALK button, and speak clearly to transmit a message to the other walkie talkie. 4. Release the PUSH TO TALK button when you are finished talking so that you can hear any incoming messages from the other walkie talkie. 5. When you are finished using your walkie talkies, make sure the ON/OFF Switch is in the OFF position. Your walkie talkies contain small parts which can be a choking risk for small children. This device is recommended for children aged 5 and up, and should be used only with parental supervision . When replacing the batteries, do not mix old and new batteries or different types of batteries. PACKAGE CONTENTS INSERTING BATTERIES USING YOUR WALKIE TALKIES WARNING Night Talkies Instruction Manual ON/OFF SWITCH LIGHT ANTENNA FLASHLIGHT NO/OFF PUSH TO TALK FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference , and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions. May cause harmful interference to radio or -television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: __ Reorient or relocate the receiving antenna. __ Increase the separation between the equipment and receiver. __ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. __ Consult the dealer or experienced radio/ TV technician for help. This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident. To obtain Warranty Service and Troubleshooting information: Call 1-877-397-8200 in the U.S. or 0-800-917-4831 in the UK or Visit our website at www.sakar.com. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE. Som…
Text truncated - open the document above for the full version.
External Photo
Internal Photo
SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM150500251401 Page: 1 of 16 FCC ID: 2ACFM85800878 . Jerry Chan Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 1 Cover Page TEST REPORT The following sample(s) was/were submitted and identified on behalf of the client as: Application No.: GZEM1505002514CR Applicant: SHANTOU CITY DAYE PLASTIC TOYS CO.,LTD Manufacturer: The same as applicant FCC ID: 2ACFM85800878 Product Description: Walkie talkie series Model No.: WT3-01057, WT6-01032, WT6-01050, WT6-01096, WT2-01062, WT2-01050, WT2-01096, WT2-01367, WT2-01082, WT2-01032, WT2-01084, WT2-02081, WT3-01056, WT3-01032, WT3-01096, WT3-01082, WT3-01009, WT3-01062, WT3-01346, WT3-01081, BK1-05082, BK1-05081, BK1-05057, BK1-05032, BK1-05080, BK1-05085, BK1-05096, WT6-01009, WT6-01062, WT6-01367, WT6-01082, WT6-01084, WT6-01056, WT6-01057, WT6-01346 ♣ ♣ Please refer to section 3 of this report for further details. Standards: CFR 47 PART 15 Subpart C: 2014 section 15.235 Date of Receipt: 2015-05-27 Date of Test: 2015-06-09 to 2015-06-15 Date of Issue: 2015-06-18 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further details. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM150500251401 Page: 2 of 16 FCC ID: 2ACFM85800878 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-06-18 Original Report Authorized for issue by: Tested By 2015-06-09 to 2015-06-11 (Lily Kuang) /Project Engineer Date Prepared By 2015-06-17 (Sandy Zheng) / Clerk Date Checked By 2015-06-18 (Little Xiang) / Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM150500251401 Page: 3 of 16 FCC ID: 2ACFM85800878 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspxand,for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except …
Text truncated - open the document above for the full version.
Test Setup Photo 1.1 RADIA TED EMISSI ON (30MHZ-1GHZ)
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 49.68 MHz - 49.68 MHz | - |

WALKIES TALKES
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter