2ACG7VULKANGSM MOBILE PHONE

1 ALL RIGHTS RESERVED HIPERTRONICS S.A ©2014. All rights are reserved. No part of this document can be reproduced without permission. All trademarks and brand names mentioned in this publication are property of their respective owners. While all the efforts have been made to ensure the accuracy of contents in this manual, we presume no responsibility for errors or omissions or statements of any kind, whether such errors are omissions or statements resulting from negligence, accidents, or any other cause. We operate a policy of continuous development and reserve the right to make changes, modifications and improvements to the device, device features/specifications or any of its parts without prior notice. Your device may have preinstalled bookmarks and links for third party internet sites and may allow you to access third party sites. These are no affiliated with Spice, and Spice does not endorse or assume liability for them. If you access such sites, take precautions for security or content. The limited warranty does not cover user manuals or any third party software, settings, content, data or links, whether included/ downloaded in the product, whether included during installment, 2 assembly, shipping or any other time in the delivery chain or otherwise and in any way acquired by you. To the extent permitted by applicable law(s), Spice does not warrant that any Spice software will meet your requirements, will work in combination with any hardware or software applications provided by a third party, that the operations of the software will be uninterrupted or error free or that any defects in the software are correctable or will be corrected. Note: User’s Manual is provided just to guide the user about the functionality of the device. This does not seem to be any certificate of technology. Some functions may vary due to modifications and up-gradations of software or due to printing mistake. 3 TABLE OF CONTENTS SAFETY PRECAUTIONS........................................................................ 5 UNDERSTANDING YOUR DEVICE ........................................................ 7 GENERAL INFORMATION ..........................................7 FUNCTION OF KEYS ................................................7 STATUS ICONS.......................................................9 GETTING STARTED ........................................................................... 10 INSTALLING SIM CARD AND BATTERY .................................................. 10 INSTALLING MEMORY CARD .............................................................. 10 CHARGING THE BATTERY................................................................... 11 SWITCH ON/OFF THE DEVICE ............................................................ 12 AUTOMATIC CUSTOMER REGISTRATION ............................................... 12 BASIC OPERATIONS .......................................................................... 12 TO MAKE CALLS ............................................................................. 12 TO DIAL INTERNATIONAL NUMBER ..................................................... 13 ANSWER/REJECT AN INCOMING CALL .................................................. 13 4 MAIN MENU .................................................................................... 13 CALL LOGS .................................................................................. 14 CONTACTS .................................................................................. 15 MESSAGES .................................................................................. 16 FM RADIO .................................................................................... 18 FILE MANAGER ............................................................................... 18 MULTIMEDIA .............................................................................. 18 ORGANIZER ................................................................................ 20 SERVICES .................................................................................... 22 SETTINGS .................................................................................... 24 SUPPORT AND CONTACT ................................................................. 28 ENVIRONMENTAL CONCERN............................................................ 29 5 SAFETY PRECAUTIONS Please read the following safety guidelines before using the device.  Do not use the phone while you are driving.  Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them.  Keep your phone and its accessories away from children.  Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. People having active medical implants should keep their cell phone at least 15 cm away from the implant.  Permanent hearing loss may occur if you use earphones or headphones at high volume.  Use a wireless hands-free system (headphone/ headset) with a low power Bluetooth emitter.  Make sure the cell phone has a low SAR. 6  Keep your calls short or send a text message (SMS) instead. This advice applies specially to children adolescents and pregnant women.  Use cell phone when the signal quality is good. Notice:  Do not dismantle the device or accessories otherwise, manufacturer is not liable to pay for damages as the device and accessories are not covered by warranty.  Use only original batteries and charging devices.  Please back up your important data timely and keep them properly. The company is not liable for any failure to call or loss of data due to miss-operation, poor signal or power cut, etc.  All the screens in this manual are for reference only, and some contents actually displayed may depend upon the presetting of the service provider or the network operator, or the SIM card. If any functions referred to in this manual are different from those of your device, please follow your device.  Do…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 HIPERTRONICS S.A 2014-05-27 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, __ HIPERTRONICS S.A _hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product： GSM MOBILE PHONE Trade Name： Grun Mobile Model Number： Vulkan Serial Model： N/A FCC ID： 2ACG7VULKAN We affirm that between SIEMIC and ____ HIPERTRONICS S.A ___, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title : Sr. Henry Aguilar /Manager Contact information / address : alborada 10 etapa local 23,Guayaquil,Ecuador

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 HIPERTRONICS S.A 2014-05-28 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ACG7VULKAN We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description - Tune up Procedure - Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title : Sr. Henry Aguilar /Manager Contact information / address : alborada 10 etapa local 23,Guayaquil,Ecuador

HIPERTRONICS S.A Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for ( FCC ID: 2ACG7VULKAN) To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. We understand that devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm Select the "accredited" option to search for FCC recognized accredited test firms. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. Regards, Signatory Client’s signature Client’s name / title : Sr. Henry Aguilar /Manager Contact information / address : alborada 10 etapa local 23,Guayaquil,Ecuador

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

GSM MOBILE PHONE Model: Vulkan FCC ID: 2ACG7VULKAN Label

Photo 7 Photo 8 GSM Antenna Photo 9 BT Antenna

FCC ID APPLI C PRODU BRAND MODEL CLIENT DATE O STAND REPOR A CAUTIO This rep laborato CATION PUR UCT DESIGN D NAME L NAME T OF ISSUE DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA : RPOSE : NATION : : : : : : : tion of G not be repro all not be q Rep R Te Original E GSM MO B Grun Mo b Vulkan HIPERTR May 20,2 0 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o port No.: A est Equipment BILE PHONE bile ONICS S.A 014 1528:2003 2.1093 SI C95.1 Complia cept in full w of context. AGC0058 Rep ance(Sh without the 81140422 Report port henzhen e written p 2FH01 t No.:AGC00 t n) Co., L ermission 0581140422 Page 1 o Ltd. of the test FH01 of 110 2ACG7VULKAN Report No.:AGC00581140422FH01 Page 2 of 110 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / May 20,2014 Valid Original Report The test plans were performed in accordance with 47CFR § 2.1093; IEEE/ANSI C95.1 and the following specific FCC Test Procedures: ·KDB 447498 D01 General RF Exposure Guidance v05r02 ·KDB 648474 D04 SAR Handsets Multi Xmiter and Ant v01r03 ·KDB 865664 D01 SAR measurement 100 MHz to 6 GHz v01 ·KDB 941225 D03 SAR Test Reduction GSM GPRS EDGE v01 App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturer N nufacturer A duct Design nd Name del Name erent Descri T Voltage plicable Stan t Date formed Loca port Templat e ess Name Address nation iption ndard ation te Tes HIPE SIMO Shen 5th F To wn GSM Grun Vulka N/A DC3. IEEE 47CF IEEE May Attes 2 F, B Stree AGC Teste Check e Authoriz st Rep ERTRONICS ON BOLÍVAR nzhen L&P A Floor, 23 Bloc n, Shenzhen MOBILE P Mobile an 7V by batte E Std. 1528:2 FR § 2.1093 E/ANSI C95. 19,2014 station of Glo Building 2, N et, Bao'an D RT-US-2G/S d By ed By zed By port C S S.A R 656, CUE Ace Technolo ck, Changxi HONE ry 2003 1 obal Complia No.1-No.4, C istrict, Shen SAR (2014-0 Eric Zh Angel a Solger Z Certific NCA AZUAY ogy Co., Ltd ng Technolo ance(Shenz Chaxi Sanwe nzhen, China 04-01) hou a Li hang Report cation Y ECUADOR d. ogy, Wan'an zhen) Co., L ei Technical a May 20,201 May 20,201 May 20,201 t No.:AGC00 n R Road, Shay td. Industrial Pa 4 4 4 0581140422 Page 3 o yi Village, S ark, Gushu, FH01 of 110 hajin Xixiang Report No.:AGC00581140422FH01 Page 4 of 110 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT D ESCRIPTION ...................................................................................................................................... 6 2.2. T EST P ROCEDURE ...................................................................................................................................... 7 2.3. T EST E NVIRONMENT .................................................................................................................................... 7 2.4. T EST C ONFIGURATION AND SETTING ............................................................................................................. 8 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 9 3.1. S PECIFIC A BSORPTION R AT E (SAR) ............................................................................................................. 9 3.2. SAR M EASUREMENT P ROCEDURE ............................................................................................................. 10 3.3. COMOSAR S YSTEM D ESCRIPTION ............................................................................................................. 11 3.4. COMOSAR E-F IELD P ROBE ..................................................................................................................... 13 3.5. I SOTROPIC E-F IELD P ROBE S PECIFICATION ................................................................................................. 13 3.6. R OBOT ..................................................................................................................................................... 13 3.7. V IDEO P OSITIONING S YSTEM ..................................................................................................................... 14 3.8. D EVICE H OLDER ....................................................................................................................................... 14 3.9. SAM T WIN P HANTOM ................................................................................................................................ 15 4. TISSUE SIMULATING LIQUID ...................................................................................................................... 16 4.1. T HE COMPOSITION OF THE TISSUE SIMULATING LIQUID ................................................................................... 16 4.2. T ISSUE C ALIBRATION R ESULT ..................................................................................................................... 17 4.3. T ISSUE D IELECTRIC P ARAMETERS FOR H EAD AND B ODY P HANTOMS .............................................................. 18 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 19 5.1. SAR S YSTEM V ALIDATION P ROCEDURES .................................................................................................... 19 5.2. SAR S YSTEM V ALIDATION .......................................................................................................................... 20 6. EUT TEST POSITION ................................................................................................................................... 22 6.1. D EFINE T WO I MAGINARY L INES ON THE H ANDSET .........................…

Text truncated - open the document above for the full version.

RADIO TEST REPORT FCC ID: 2ACG7VULKAN Product： GSM MOBILE PHONE Trade Name： Grun Mobile Model Name： Vulkan Serial Model： N/A Report No.： BZT14052989 Prepared for HIPERTRONICS S.A SIMON BOLIVAR 656, CUENCA,AZUAY,Ecuador Prepared by BZT Testing Technology Co., Ltd Page 2 of 42 Report No.: BZT14052989 ` TEST RESULT CERTIFICATION Applicant’s name ................. : HIPERTRONICS S.A Address ................................. : SIMON BOLIVAR 656, CUENCA,AZUAY,Ecuador Manufacture's Name ............ : Shenzhen L&P Ace Technology Co.,Ltd Address ................................. : 5th floor, 23block,Changxing Technology, Wan'an Road, Shayi Village, Shajin Town, Shenzhen,China Product description Product name ........................... : GSM MOBILE PHONE Model and/or type reference : Vulkan Serial Model ............................. : N/A Standards ............................. : FCC Part 22H and 24E Test procedure .............................. : TIA 603D This device described above has been tested by BZT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of BZT, this document may be altered or revised by BZT, personal only, and shall be noted in the revision of the document. Date of Test .......................................... : Date (s) of performance of tests ............. : 12 May 2014 ~25 May 2014 Date of Issue ........................................ : 29 May 2014 Test Result ............................................ : Pass Page 3 of 42 Report No.: BZT14052989 ` Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 8 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 10 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 11 3 . TEST RESULT 12 3.1 ANTENNA REQUIREMENT 12 3.1.1 STANDARD REQUIREMENT 12 3.1.2 EUT ANTENNA 12 3.2 OUTPUT POWER 13 3.2.1 CONDUCTED OUTPUT POWER 13 3.2.2 RADIATED OUTPUT POWER 14 3.3 SPURIOUS EMISSION 16 3.3.1 CONDUCTED SPURIOUS EMISSION 16 3.3.2 RADIATED SPURIOUS EMISSION 18 3.4 FREQUENCY STABILITY 21 3.4.1 MEASUREMENT METHOD 21 3.4.2 PROVISIONS APPLICABLE 21 3.5 OCCUPIED BANDWIDTH 24 3.5.1 MEASUREMENT METHOD 24 3.5.2 PROVISIONS APPLICABLE 24 3.5.3 MEASUREMENT RESULT 24 3.6 EMISSION BANDWIDTH 25 3.6.1 MEASUREMENT METHOD 25 3.6.2 PROVISIONS APPLICABLE 25 3.6.3 MEASUREMENT RESULT 25 3.7 BAND EDGE 26 3.7.1 MEASUREMENT METHOD 26 3.7.2 PROVISIONS APPLICABLE 26 3.7.3 MEASUREMENT RESULT 26 APPENDIX I 27 APPENDIX II 36 APPENDIX III 40 Page 4 of 42 Report No.: BZT14052989 ` Table of Contents Page 4 . EUT TEST PHOTO 42 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 42 Report No.: BZT14052989 ` 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: Item Number Item Description Rules Result 1 Output Power Conducted Output Power 22.913(a) / 24.232 (b) RSS-132(5.4) SRSP-503(5.1.3) Pass Radiated Output Power 2 Spurious Emission Conducted Spurious Emission 2.1051 / 22.917 / 24.238 RSS-132(5.5) RSS-133 (6.5) Pass Radiated Spurious Emission 3 Frequency Stability 2.1055 /24.235 RSS-132(5.3) RSS-133(6.3) Pass 4 Occupied Bandwidth 2.1049 (h)(i) Pass 5 Emission Bandwidth 22.917(b) / 24.238 (b) RSS-132(5.5.1) RSS-133(6.5.1) Pass 6 Band Edge 22.917(b) / 24.238 (b) RSS-132(5.5.1) RSS-133(6.5.1) Pass Page 6 of 42 Report No.: BZT14052989 ` 1.1 TEST FACILITY BZT Testing Technology Co., Ltd Add. : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registration No.: 701733 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 Radiated Emission Test ±3.17dB 3 RF power,conducted ±0.16dB 4 Spurious emissions,conducted ±0.21dB 5 All emissions,radiated(<1G) ±4.68dB 6 All emissions,radiated(>1G) ±4.89dB Page 7 of 42 Report No.: BZT14052989 ` 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment GSM MOBILE PHONE Trade Name Grun Mobile Model Name Vulkan OEM Brand/Model Name N/A Model Difference N/A Frequency: GSM 850 MHz;:824.2-848.4MHz PCS 1900 MHz: 1850.2-1909.8MHz Output Power: GSM850(Class 4) : 1.528 W (31.84 dBm) GSM1900 (Class 1) : 0.766 W (28.84 dBm) Type of Modulation GMSK Antenna Type PIFA Antenna Power Source DC Voltage supplied from battery Power Rating DC 3.7V from battery Connecting I/O Port(s) Please refer to the User's Manual Products Covered N/A EUT Modification(s) N/A Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 8 of 42 Report No.: BZT14052989 ` 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. For Radiated Emission Final Test Mode Description GSM850 TX1 PCS1900 TX2 Note: (1)During the testing, the EUT (GSM Dual Band GSM MOBILE PHONE) was controlled via Rhode & Schwarz Digital Radio Communication Tester (CMU 200) to ensure max power transmission and proper modulation. Three channels (The top channel, the middle channel and the bottom channel) were chosen for testing on both GSM and PCS frequency band. (2) The EUT use new battery. Page 9 of 42 Report No.: BZT14052989 ` 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED System Simu…

Text truncated - open the document above for the full version.

Page 41 of 42 Report No.: BZT14052990 10. EUT TEST PHOTO Radiated Measurement Photos Page 42 of 42 Report No.: BZT14052990 Conducted Measurement Photos