2ACGPPR-08TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER

5 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2ACGPPR-08 PROMI TECHNOLOGY (HK) CO., LIMITED Model No.: PR-08 Model name: TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

PROMI TECHNOLOGY (HK) CO., LIMITED SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 PROMI TECHNOLOGY (HK) CO., LIMITED SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 2014/05/18 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, PROMI TECHNOLOGY (HK) CO., LIMITED hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product： TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER Model Name： PR-08, PR-06, PR-03 Trade name: N/A FCC ID： 2ACGPPR-08 We affirm that between SIEMIC and __ PROMI TECHNOLOGY (HK) CO., LIMITED __ , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Signature Date: 2014/05/18 Name: Tommy zhang Title: Manager Tel: +86-0757-26904990 Company: PROMI TECHNOLOGY (HK) CO., LIMITED

PROMI TECHNOLOGY (HK) CO., LIMITED SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 PROMI TECHNOLOGY (HK) CO., LIMITED SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 2014/05/18 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ACGPPR-08 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Signature Date: 2014/05/18 Name: Tommy zhang Title: Manager Tel: +86-0757-26904990 Company: PROMI TECHNOLOGY (HK) CO., LIMITED

Differences Description We PROMI TECHNOLOGY (HK) CO., LIMITED state: Product name: TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER Model: PR-08, PR-06, PR-03 All model’s the function, software and electric circuit are the same , only with a product color and model named different. Signatory Signature Date: 2014/05/18 Name: Tommy zhang Title: Manager Tel: +86-0757-26904990 Company: PROMI TECHNOLOGY (HK) CO., LIMITED

Top View Bottom View Rear View Left View Right View Front View

Label: Label Location FCC ID: 2ACGPPR-08

Top View Bottom View Antenna Top View Bottom View

FCC RADIO TEST REPORT FCC ID: 2ACGPPR-08 Product： TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER Trade Name： N/A Model Name： PR-08 Serial Model： PR-06, PR-03 Report No.： BZT-2014NT0502014F Prepared for PROMI TECHNOLOGY (HK) CO., LIMITED UNIT A5,9/F SILVERCORP INT’L TOWER 707-703 NATHAN RD MONGKOK KLN HONG KONG Prepared by BZT Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China Page 2 of 34 Report No.:BZT-2014NT0502014F TEST RESULT CERTIFICATION Applicant’s name ................. : PROMI TECHNOLOGY (HK) CO., LIMITED Address ................................. : UNIT A5,9/F SILVERCORP INT’L TOWER 707-703 NATHAN RD MONGKOK KLN HONG KONG Manufacture's Name ............ : SHENZHEN PROMI DIGI-TECH CO.,LTD Address ................................. : Yao Lu Industrial Park B Building 2 floor,two people Road No. 289 ,xixiang, Baoan, Shenzhen Product description Product name ........................... : TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER Model and/or type reference : PR-08 Serial Model： PR-06, PR-03 Rating(s) ................................ : DC 1.5V from battery Standards ............................. : FCC Part15.249 Test procedure .............................. ANSI C63.4-2 003 This device described above has been tested byBZT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval ofBZT, this document may be altered or revised byBZT , personal only, and shall be noted in the revision of the document. Date of Test ............................................ : Date (s) of performance of tests ............. : 04 May. 2014 ~09 May. 2014 Date of Issue ........................................... : 10 May. 2014 Test Result ............................................... : Pass Testing Engineer : (Lynn Chen) Technical Manager : (Carlen Liu) Authorized Signatory : (To m m y zhang) ` Page 3 of 34 Report No.:BZT-2014NT0502014F Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 TEST FACILITY 5 1.2 MEASUREMENT UNCERTAINTY 5 2 . GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 DESCRIPTION OF TEST MODES 8 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 10 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 11 3 . ANTENNA REQUIREMENT 12 3.1 STANDARD REQUIREMENT 12 3.2 EUT ANTENNA 12 3.3 CONDUCTED EMISSION MEASUREMENT 13 3.3.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.3.2 TEST PROCEDURE 14 3.3.3 DEVIATION FROM TEST STANDARD 14 3.3.4 TEST SETUP 14 3.2.5 TEST RESULT 15 3.4 RADIATED EMISSION MEASUREMENT 16 3.4.1 RADIATED EMISSION LIMITS 16 3.4.2 TEST PROCEDURE 17 3.4.3 DEVIATION FROM TEST STANDARD 17 3.4.4 TEST SETUP 18 3.4.5 TEST RESULTS (BLOW 30MHZ) 20 3.4.6 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 21 3.4.7 TEST RESULTS (ABOVE 1000 MHZ) 23 3.4.8 TEST RESULTS (RESTRICTED BANDS REQUIREMENTS) 26 4 . BANDWIDTH TEST 30 4.1 TEST PROCEDURE 30 4.2 DEVIATION FROM STANDARD 30 4.3 TEST SETUP 30 4.4 TEST RESULTS 31 5 . EUT TEST PHOTO 34 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS ` Page 4 of 34 Report No.:BZT-2014NT0502014F 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A 15.203 Antenna Requirement Pass 15.249 Radiated Spurious Emission Pass 15.205 Band Edge Emission Pass 15.249 Occupied Bandwidth Pass NOTE: (1)” N/A” denotes test is not applicable in this Test Report ` Page 5 of 34 Report No.:BZT-2014NT0502014F 1.1 TEST FACILITY BZT Testing Technology Co., Ltd Add. : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registered No.: 701733 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% ` Page 6 of 34 Report No.:BZT-2014NT0502014F 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER Trade Name N/A Model Name PR-08 Serial Model PR-06, PR-03 Model Difference All model’s the function, software and electric circuit are the same, only with a product color and model named different, test mode is PR-08. Product Description The EUT is a TOUCH PEN MOUSE WITH WEB BROWSING LASER PRESENTER Operation Frequency: 2408~2474MHz Modulation Type: GFSK Antenna Designation: PCB antenna Antenna Gain(Peak) 0 dBi EIRP 92.96 dbuv/m@3m Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Channel List Please refer to the Note 2. Adapter N/A Battery DC 1.5V Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. ` Page 7 of 34 Report No.:BZT-2014NT0502014F 2. Channel List Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 01 2408 13 2432 25 2456 02 2410 14 2434 26 2458 03 2412 15 2436 27 2460 04 2414 16 2438 28 2462 05 2416 17 2440 29 2464 06 2418 18 2442 30 2466 07 2420 19 2444 31 2468 08 2422 20 2446 32 2470 09 2424 21 2448 33 2472 10 2426 22 2450 34 2474 11 2428 23 2452 12 2430 24 2454 3. Table for Filed Antenna Ant . Brand Model Name Antenna Type Connector Gain (dBi) NOTE 1 N/A N/A PCB antenna NA 0 Antenna ` Page 8 of 34 Report No.:BZT-2014NT0502014F 2.2 DESCRIPTION OF…

Text truncated - open the document above for the full version.

Radiated Emission Test Setup in Chamber