2ACH8283MPortable Bluetooth PA System

User Manual 1. Bluetooth Version: V3.0 2. Brand: ISSC 3. Working distance: 10 meters straight 4. Keys: Volume Increase, Volume Decrease, Power ON/OFF 5. Function keys description: +: increase volume -: decrease volume Remark: Volume at half after power on Power ON/OFF button When the power is on, the product will connect to the speaker near to the microphone. 6. LED indication 1. RED LED in charging, Blue LED in fully charge 2. Auto connection mode: Red and blue LED 3. Connection success: Flash twice in 3 seconds 4. Low battery LED: Red flash 7. Microphone Type: Capacitive -42dB+/- 3dB 8. Battery: Li-on 3.7V, 150mAh 9. Charging port: Mini USB 5V 10. Charge current: ≤100mA 11. Charging time: around 2 hours 12. Sound delay: 80-100ms 13. Application: Bluetooth Speaker 14. Operation: Hold Power ON button until LED flash, and turn on Bluetooth speaker for auto connection. After 3-5 seconds, RED/BLUE LED flash means connection success. If it is not success, turn off both unit and turn on again. Press volume + or – for increase or decrease volume. The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : -Reorient or relocate the receiving antenna. -Increase the separation between the product and receiver. - Connect the product into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

KARI PRODUCTS (HK) COMPANY LIMITED Unit 15, 28/F, ONE MIDTOWN, 11 Hoi Shing Road, Tsuen Wan, N.T., Hong Kong Tel:(852)3162 8483 Fax:(852)3568 5984 Authorization Letter June 20, 2014 Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Dear Sir/Madam We, the undersigned, hereby authorize SGS IECC Limited to act on our behalf in all matter relating to FCC equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS IECC Limited on our behalf shall have the same effect as acts of our own. This authorization is valid for the FCC Certification with FCC ID: _2ACH8283M___ and expires on __19 June 2015__. Signature: ______________ Name:___Ricky Yau_______________________ Title: ___Marketing Manager_________________

KARI PRODUCTS (HK) COMPANY LIMITED Unit 15, 28/F, ONE MIDTOWN, 11 Hoi Shing Road, Tsuen Wan, N.T., Hong Kong Tel:(852)3162 8483 Fax:(852)3568 5984 022311 – 6 Authority to Act as Agent Date: _20 June 2014____ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: SGS IECC limited is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____19 June 2015____ By: __________________________ ___Ricky Yau______________ (Signature 1 ) (Print name) Title: ___Marketing Manager_______ On behalf of: __Kari Products (HK) Company Limited____ (Company Name) Telephone: __(852) 3162 8483___________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. KARI PRODUCTS (HK) COMPANY LIMITED Unit 15, 28/F, ONE MIDTOWN, 11 Hoi Shing Road, Tsuen Wan, N.T., Hong Kong Tel:(852)3162 8483 Fax:(852)3568 5984 022311 – 6 Request for Confidentiality Date: _20June 2014_______ Subject: Confidentiality Request for: _2ACH8283M ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ______Kari Products (HK) Company Limited______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _____ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _______________ ___Ricky Yau_______________ (Signature/Title 3 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID: 2ACH8283M External Photo FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M

FCC ID: 2ACH8283M Internal Photo FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M

Report No.: HKES140400054601 Page: 1 of 25 Authorized Signature: CHEN Jian-feng, Jeffrey The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS IECC Limited or testing done by SGS IECC Limited in connection with, distribution or use of the product described in this report must be approved by SGS IECC Limited in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC ID: 2ACH8283M Member of the SGS Group (SGS SA) FCC Test Report Application No.: HKES140400054601 Applicant: Kari Products (HK) Company Limited Address: Unit 15, 28/F, One Midtown 11 Hoi Shing Road, Tsuen Wan, N.T., H.K. Product Information: Product Description: Portable Bluetooth PA System Model: PA-283M Product Class : Low Power Communication Device – Transmitter (2.4 GHz) FCC ID: 2ACH8283M Requirement: CFR 47 FCC PART 15 SUBPART C, 2013 - Intentional Radiators. Date of Receipt: 2014-04-02 Date of Test: 2014-04-30 Date of Issue: 2014-05-08 Test Result : PASS* * In the configuration tested, the EUT complied with the requirements for the relevant clauses of Federal Communications Commission Rules as specified above. Report No.: HKES140400054601 Page: 2 of 25 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC ID: 2ACH8283M Member of the SGS Group (SGS SA) 2 Test Summary Test Test Requirement Test Method Result Conducted Emission (150KHz to 30MHz) FCC PART 15, SUBPART C: 2013 ANSI C63.4:2003 PASS Radiated Emission (9kMHz to 1GHz) FCC PART 15, SUBPART C: 2013 ANSI C63.4:2003 PASS Radiated Emission above 1 GHz FCC PART 15, SUBPART C: 2013 ANSI C63.4:2003 PASS Band edge / 20 dB Bandwidth FCC PART 15, SUBPART C: 2013 ANSI C63.4:2003 Marker-Detla measurement PASS Report No.: HKES140400054601 Page: 3 of 25 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC ID: 2ACH8283M Member of the SGS Group (SGS SA) 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 2 3 CONTENTS ..................................…

Text truncated - open the document above for the full version.

FCC ID: 2ACH8283M Setup Photo Conducted emission Radiated emission FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M FCC ID: 2ACH8283M