2ACHW-IOT-800N8 inch Android Panel PC

I 2020.04 IOT-800N 8" Risc-based Panel PC User's Manual Version 1.0 - II - This page is intentionally left blank. - i - Revision History VersionRelease DateDescription 1.02020.04Initial release - ii - Copyright Copyright © 2020 ARBOR Technology Corp. All Rights Reserved. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Disclaimer The information in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer. Under no circumstances will the manufacturer be liable for any direct, indirect, special, incidental, or consequential damages arising from the use or inability to use the product or documentation, even if advised of the possibility of such damages. About This Manual This user’s manual provides the general information and installation instructions for the product. The manual is meant for the experienced users and integrators with hardware knowledge of personal computers. If you are not sure about any description in this manual, consult your vendor before further handling. We recommend that you keep one copy of this manual for the quick reference for any necessary maintenance in the future. Thank you for choosing ARBOR products. - iii - Contents Contents Preface...........................................................................................................v Declaration of Conformity.....................................................................................v CE ................................................................................................................v FCC Class B ................................................................................................v RoHS ...........................................................................................................vi SVHC / REACH ...........................................................................................vi Safety Symbols ..................................................................................................vii Important Safety Instructions .............................................................................vii General Cleaning Tips.........................................................................................ix Cleaning Tools .............................................................................................ix Recommended Cleaning Procedures ..........................................................x Disposing of the Equipment ................................................................................xi Additional Information & Technical Support .......................................................xii Warranty .............................................................................................................xii Chapter 1 Introduction ................................................................................1 1.1 Product Highlights ..........................................................................................2 1.2 Package Contents ..........................................................................................2 1.3 Optional Accessories......................................................................................3 1.4 Specifications .................................................................................................4 1.5 System View ..................................................................................................6 1.6 Dimension ......................................................................................................8 1.7 Pin Out Definition ..........................................................................................8 1.7.1 RS-232 Port (COM2)...........................................................................8 1.7.2 RS-232/422/485 (COM3) ....................................................................9 1.7.3 DI/DO and CAN Bus .........................................................................10 1.7.4 RS-232 ..............................................................................................11 Chapter 2 Getting Started .........................................................................13 2.1 microSD Card Installation ............................................................................15 2.2 Antenna Installation ......................................................................................16 2.3 Power Connection ........................................................................................17 2.3.1 Power Connector ..............................................................................17 2.3.2 Wiring Cables to 3-pin Terminal Block ..............................................17 2.3.3 Using Power Adapter (Optional)........................................................19 2.4 Confguring COM Port ..................................................................................19 2.5 Mounting the Device ....................................................................................21 - iv - Contents Chapter 3 Using the Device ......................................................................23 3.1 Power On/Off and Sleep Options .................................................................24 3.2 Home Screen ...............................................................................................25 3.2.1 Status Bar .........................................................................................27 3.2.2 Using the Quick Settings Panel.........................................................27 3.2.3 Viewing Power Voltage .....................................................................28 3.3 Enabling Wi-Fi and Connecting to a WLAN ......................…

Text truncated - open the document above for the full version.

S19122300804 Model: IoT-800N N20191017V1 ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 S19122300804 Model: IoT-800N N20191017V1 Photo 3 Photo 4 S19122300804 Model: IoT-800N N20191017V1 Photo 5 Photo 6 BT/2.4G WIFI ANT

2ACHW-IOT-800N 2ACHW-IOT-800N

S19122300804 Model: IoT-800N N20191017V1 Photo 1 Photo 2 S19122300804 Model: IoT-800N N20191017V1 Photo 3 Photo 4 S19122300804 Model: IoT-800N N20191017V1 Photo 5 Photo 6 S19122300804 Model: IoT-800N N20191017V1 Photo 7 Photo 8 S19122300804 Model: IoT-800N N20191017V1 Photo 9 Photo 10 S19122300804 Model: IoT-800N N20191017V1 Photo 11 Photo 12 S19122300804 Model: IoT-800N N20191017V1 Photo 13 Photo 14 S19122300804 Model: IoT-800N N20191017V1 Photo 15 Photo 16 NFC ANT

version01 Arbor Technology Corp. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: IoT-800N FCC ID: 2ACHW-IOT-800N fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for antenna type(s) described below: BT/BLE/2.4GWIFI: Model No. of antenna: N/A Type of antenna: External Antenna has a unique connector Gain of the antenna: 2.9 dBi Frequency range: 2400-2500 MHz NFC: Model No. of antenna: N/A Type of antenna: Induction coil permanently attached (built into the housing) Frequency range: 13.56 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Arbor Technology Corp. Address: 10F., No.700, Zhongzheng Rd., Zhonghe Dist., City: New Taipei City ZIP / Postal code: 235, Taiwan, R.O.C Country: China Place: York Lu/Senior Specialist Date: 04/08/2020 Signature:

FCC ID: 2ACHW-IOT-800N According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. WIFI: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n 1g SAR Exclusion threshold SAR test exclusion 2.412 12.24 16.749 12±113 19.953<56.197537.50YES 2.437 12.19 16.558 12±113 19.953<56.229577.50YES 2.462 12.24 16.749 12±113 19.953<56.261447.50YES 2.412 11.65 14.622 12±113 19.953<56.197537.50YES 2.437 11.28 13.428 12±113 19.953<56.229577.50YES 2.462 11.16 13.062 12±113 19.953<56.261447.50YES 2.412 11.80 15.136 12±113 19.953<56.197537.50YES 2.437 11.23 13.274 12±113 19.953<56.229577.50YES 2.462 11.35 13.646 12±113 19.953<56.261447.50YES 2.422 11.83 15.241 12±113 19.953<56.210367.50YES 2.437 12.26 16.827 12±113 19.953<56.229577.50YES 2.452 12.64 18.365 12±113 19.953<56.248717.50YES 802.11b 802.11g 802.11n HT20 802.11n HT40 BT: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n 1g SAR Exclusion threshold SAR test exclusion 2.402 7.932 6.212 8±19 7.943<52.462167.50YES 2.441 6.615 4.587 7±18 6.310<51.971587.50YES 2.48 7.188 5.234 7±18 6.310<51.987277.50YES 2.402 8.008 6.321 8±19 7.943<52.462167.50YES 2.441 6.782 4.767 7±18 6.310<51.971587.50YES 2.48 7.383 5.474 7±18 6.310<51.987277.50YES 2.402 8.412 6.937 8±19 7.943<52.462167.50YES 2.441 7.206 5.255 7±18 6.310<51.971587.50YES 2.48 7.772 5.987 7±18 6.310<51.987277.50YES GFSK π/4- DQPSK 8-DPSK BLE: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n 1g SAR Exclusion threshold SAR test exclusion 2.402 -3.078 0.492 -3±1-2 0.631<50.195587.50YES 2.44 -4.255 0.375 -4±13 1.995<50.623347.50YES 2.48 -3.741 0.423 -4±1-3 0.501<50.157857.50YES GFSK Conclusion: For the max result : 6.26144≤ 7.5 for 10-g SAR, No SAR is required. Signature: Date: 2020-03-30 NAME AND TITLE (Please print or type): Alex Li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Report No.: S19122300804003 Version.1.3 Page 1 of 89 FCC RADIO TEST REPORT FCC ID: 2ACHW-IOT-800N Product: 8’’Android Panel PC Trade Mark: N/A Model No.: IoT-800N Family Model: IoT-800N-**** Report No.: S19122300804003 Issue Date: 30 Mar. 2020 Prepared for Arbor Technology Corp. 10F., No.700, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan, R.O.C Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn Report No.: S19122300804003 Version.1.3 Page 2 of 89 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES ....................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS .................................................................................... 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 19 7.3 6DB BANDWIDTH ....................................................................................................................................... 28 7.4 DUTY CYCLE ............................................................................................................................................... 30 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 32 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 34 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 36 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 38 7.9 ANTENNA APPLICATION .......................................................................................................................... 39 8 TEST RESULTS ................................................................................................................................................... 40 8.1 DUTY CYCLE ............................................................................................................................................... 40 8.2 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 47 8.3 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 48 8.4 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 61 8.5 BAND EDGE ................................................................................................................................................. 68 8.6 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 77 Report No.: S19122300804003 Version.1.3 Page 3 of 89 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Arbor Technology Corp. Address ....................................... : 10F., No.700, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Ta i w a n , R . O . C Manufacturer's Name .................. : Arbor Technology Corp. Address ....................................... : 10F., No.700, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Ta i w a n , R . O . C Product description Product name .............................. : 8’’Android Panel PC Model and/or type reference ..... : IoT-800N Family Model ............................... : IoT-800N-**** Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURETEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C KDB 174176 D01 Line Conducted FAQ v01r01 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in com…

Text truncated - open the document above for the full version.

FCC ID: 2ACHW- IoT-800N Radiated Measurement Photos FCC ID: 2ACHW- IoT-800N Conducted Measurement Photos