2ACK8TR505DTwo-way Radio

TERA User Manual TR-500 www.tera.co TERA User Manual TR-505 www.tera.co TERA TR-505 2 TERA Welcome to TERA Product Line of Radios Congratulations on your purchase of TERA high quality two-way radio. The TR-505 model represents the state-of-the-art in high-tech design and features. This radio model features 16 GMRS/MURS channels. Your two-way radio is designed for reliable and trouble free performance for years to come. -VHF/UHF Dual-band -16 Pre-Programmed GMRS/MURS Channels -121 Quiet Codes (38 CTCSS / 83 DCS) -Time-Out Timer -Voice Announcements for Channel and Battery Level -Selectable Hi/Low Power Settings -Speaker Mic and Earphone Jacks -Includes long life (25-30 hour) Li-Ion Battery and desk charger To get the most out of your radio, please read this manual carefully before use. TERA TR-505 3 TERA TR-505 4 TERA Online Service and Support The TERA website provides additional information about obtaining service or support for the TERA line of two-way radios and accessories. Visit: www.tera.co TERA TR-505 5 Safety Matters The following recommendations will help you understand this radios safety requirements. 1. Only qualified TERA technicians are allowed to service this two-way radio. Do not disassemble the radio by yourself as it will void the warranty. 2. Use only the TERA brand battery pack and desk charger, so as to not damage the transceiver. 3. Do not expose this radio to long periods of direct sunlight, or hot or humid areas. 4. Do not put this radio in dusty or dirty locations. 5. Do not use harsh chemicals, cleaning solvents, or strong detergent to wash this radio. 6. Never transmit on this radio without an antenna connected. Caution Safety and operability of this radio can’t be guaranteed unless TERA brand accessories or parts are used. User Manual TERA TR-505 6 Content Initial Programming ............................................3 Included In Box .....................................................9 Installing The Belt Clip .......................................10 Getting Acquainted .............................................10 Battery Information ............................................10 Charging The Battery Pack ..............................12 Antenna Information ..........................................14 Radio Overview ....................................................16 Basic Operations ..................................................18 Power ON/OFF and Volume Control ............18 Channel Selection ................................................18 Monitor Function .................................................19 Make A Call ............................................................19 Receive A Call ........................................................19 Side Key Operation ..............................................20 GMRS / MURS Radio Programming .............22 Wired Clone ...........................................................24 Troubleshooting ...................................................25 Specification .........................................................27 Optional Accessories ..........................................28 Service and Support ............................................30 Warranty and Repair Services ........................30 Terms of Warranty ..............................................32 Warning Notes ......................................................34 Safety .......................................................................35 TERA TR-505 Optional Accessories ..........................................28 Service and Support ............................................30 Warranty and Repair Services ........................30 Terms of Warranty ..............................................32 Warning Notes ......................................................34 Safety .......................................................................35 7 TERA TR-505 8 Check Product Please unpack the radio and the included accessories. We recommend that you check the box for the items listed below to ensure everything is in the box. Please contact your dealer should any items be missing from the box. TERA TR-505 9 Included In Box Radio Antenna Battery Charger Belt Clip Hand Strap User Manual TERA TERA TR-505 10 Getting Acquainted Battery Information Battery Type: Li-Ion 1600 mAh Battery. Please charge the included TERA battery for 1-2 hours before use. Leave the radio or battery pack in the supplied charger cup until the red charging light goes off and the green LED light comes on which indicates the battery pack is fully charged and ready to use. Note: 1. Do not short-circuit the battery terminals or dispose the battery in fire. Never attempt to disassemble the battery pack. 2. Charge the battery in 32-105 F temperature. Otherwise the battery may not fully charge. 3. Turn off the radio before your initial charge. Use of the radio while charging may cause noise or interfere during reception or transmission. Installing The Belt Clip To install the belt clip. Place the belt clip over the two rear mounting holes and insert the two supplied phillips mounting screws and secure them into the rear of the radio body. HINT: Install the belt clip with the battery removed as the install will be easier. TERA TR-505 11 4. Avoid pulling the Radio in and out of the charger during charging to avoid interference with the charging procedure. 5. If the battery life quickly runs down even if it is fully and correctly charged, this means the battery life is over and this battery will need replacing. Please contact your authorized TERA dealer to purchase a new battery. 6. NEVER charge the battery or radio with battery if they are wet. Before charging, you should dry battery off with a towel or cloth to avoid danger. Warning: Conductive metals such as jewelry, keys or coins may result in short circuit and gen- erate a large quantity of heat when coming to contact with battery electrodes. Treat any battery carefully especially…

Text truncated - open the document above for the full version.

Powerwerx, Inc. Add: 23695 Via Del Rio Yorba Linda California 92887, United States Tel: 714-674-0073 Fax: 714-674-4949 FCC Authorization 2015-10-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Powerwerx, Inc. , the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name :Tom Mirabella Title：Manager QA-FR-170-B

Powerwerx, Inc. Add: 23695 Via Del Rio Yorba Linda California 92887, United States Tel: 714-674-0073 Fax: 714-674-4949 FCC Confidential Authorization (2015-10-22) FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ACK8TR505D In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Powerwerx, Inc.) hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Parts List/Tune up procedure (for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Client’s signature : Client’s name/ title: Tom Mirabella/Manager Contact information/address: Add: 23695 Via Del Rio Yorba Linda California 92887, United States Tel: 714-674-0073 Fax: 714-674-4949

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT– Front View EUT– Rear View EUT– Top View EUT– Bottom View EUT– Left View EUT– Right View EUT–Antenna View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label Proposed FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Label here

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT- Cover off View 1 EUT- Cover off View 2 EUT- Cover off View 3 EUT- Main Board Top View EUT- Main Board Bottom View EUT- Keyboard Top View EUT- Keyboard Bottom View EUT- Battery Front View EUT- Battery Rear View

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. SAR EVALUATION REPORT For Powerwerx, Inc. 23695 Via Del Rio Yorba Linda California 92887, United States FCC ID:2ACK8TR505D Report Type: Original report Product Type: Two-way radio Test Engineer: Terry XiaHou Report Number: RSZ150914554-20A Report Date: 2015-10-19 Reviewed By: Bell Hu SAR En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RSZ150914554-20A SAR Evaluation Report 2 of 60 Attestation of Test Results EUT Information Company Name Powerwerx, Inc. EUT Description Two-way radio FCC ID 2ACK8TR505D Model Number TR-505 Test Date 2015-10-12 TX Frequency (MHz) Modulation Max. SAR Level(s) Reported (1g-SAR) Limit (W/Kg) 151-155MHz Analog 12.5kHz Face up: 0.638 W/kg (Corrected by multiplying 50%) Body worn: 1.357 W/kg (Corrected by multiplying 50%) 1.6 Applicable Standards ANSI / IEEE C95.1: 2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fileds,3 kHz to 300 GHz. ANSI / IEEE C95.3: 2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to SuchFields,100 kHz—300 GHz. IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 v05r02: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. KDB 865664 D01v01r03: SAR measurement 100 MHz to 6 GHz . KDB 643646D01 v01r01: SAR test Reduction Considerations for Occupational PTT Radios. KDB Inquiry: Tracking Number 316436 for SAR VHF system validation. Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate SAR For Occupational /Controlled Exposure Environment limits specified in ANSI/IEEE Standards and have been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RSZ150914554-20A SAR Evaluation Report 3 of 60 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION .................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUILDELINES ............................................................................................... 6 SAR LIMITS ................................................................................................................................................................. 7 FACILITIES .................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 16 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 16 SAR MEASUREMENT SYSTEM VALIDATION AND VERIFICATION .......................................................... 17 LIQUID VERIFICATION ............................................................................................................................................... 17 SYSTEM ACCURACY VALIDATION AND VERIFICATION .............................................................................................. 19 SAR SYSTEM VERIFICATION DATA .................................................................................................................. 20 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 24 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 24 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .............................................................................. 25 FOR EUT POSITIONING PROCEDURES ........................................................................................................................ 25 SAR EVALUATION PROCEDURE ................................................................................................................................. 26 TEST METHODOLOGY ................................................................................................................................................. 26 CONDUCTED OUTPUT POWER MEASUREMENT .................................................................................…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. FCC PART 95 MEASUREMENT AND TEST REPORT For Powerwerx, Inc. 23695 Via Del Rio Yorba Linda California 92887, United States FCC ID: 2ACK8TR505D Report Type: Original Report Product Type: Two-way radio Test Engineer: Rocky Kang Report Number: RSZ150914551-00A Report Date: 2015-10-30 Reviewed By: Jimmy Xiao RF En gineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ150914551-00A FCC Part 95 Page 2 of 24 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 TEST FACILITY ............................................................................................................................................................. 3 SYSTEM TEST CONFIGURATION .......................................................................................................................... 4 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 4 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 4 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 4 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 4 SUMMARY OF TEST RESULTS ............................................................................................................................... 5 FCC §1.1307(b) & §2.1093 - RF EXPOSURE ............................................................................................................. 6 APPLICABLE STANDARD .............................................................................................................................................. 6 FCC §2.1046, §95.639(h) - RF OUTPUT POWER ..................................................................................................... 7 APPLICABLE STANDARD .............................................................................................................................................. 7 TEST PROCEDURE ........................................................................................................................................................ 7 TEST EQUIPMENT LIST AND DETAILS ........................................................................................................................... 7 TEST DATA .................................................................................................................................................................. 8 FCC §2.1047 & §95.637(a) - MODULATION CHARACTERISTIC ..................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 10 TEST PROCEDURE ...................................................................................................................................................... 10 TEST DATA ................................................................................................................................................................ 10 FCC §2.1049 & §95.633(f) & §95.635(e)- AUTHOURIZED BANDWIDTH AND EMISSION MASK .............. 17 APPLICABLE STANDARD ............................................................................................................................................ 17 TEST PROCEDURE ...................................................................................................................................................... 18 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 18 TEST DATA ................................................................................................................................................................ 18 FCC §2.1053 & §95.635(e) - RADIATED SPURIOUS EMISSION ........................................................................ 21 APPLICABLE STANDARD ............................................................................................................................................ 21 TEST PROCEDURE ...................................................................................................................................................... 21 TEST EQUIPMENT LIST AND DETAILS ..................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission View (Below 1GHz) Radiated Emission View (Above 1GHz)