2ACLV6700Panty vibe with remote

Remote Control (VPR-6700) 1. Button cell CR 2032 have been pre-installed into the remote controll. 2. Remove the paper slip inside the battery cabinet to activate the battery power in the remote control before use. 3. Press button on the remote control to control vibration function: Short press：receiver will ready for operation. Everytime button is pressed the massager will rotate through the different functions. Long press ( appx. 2 seconds)： receiver will change the massager to stand by mode, meaning the vibration will stop, however the connection between the remote and massager is still active. LED: whenever button pressed, LED light will activate to indicate signal is being sent to the massager. 4. Remove the battery cabinet from the massager for extended storage. Store the battery and the remote control separately. SPECIFICATIONS Frequency: 433.92MHz for USA , Control range: 6 meters in open area. Remote battery: CR 2032 (1 battery) Please put FCC warning as below mentioned. FCC ID: 2ACLV6700 FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 EUT View 3 EUT View 4 ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 EUT View 5 EUT View 6

ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2ACLV6700 Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2ACLV6700 Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 Solder Board-Component View 1 Solder Board-Component View 2

ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I PAGE 1 OF 19 FCC PART 15.231 FCC Part 15C Measurement and Test Report For ShenZhen Hunicom Electronics Co., Ltd Room 227, Block A of Shenzhen Zhihui lnnovation Center, Qianjin 2nd Road, Baoan District of Shenzhen,China FCC ID: 2ACLV6700 FCC Rule(s): FCC Part 15.231 Product Description: Panty vibe with remote Tested Model: VPR-6700 Report No.: STR14068225I Tested Date: 2014-06-06 to 2014-06-25 Issued Date: 2014-06-26 Tested By: Vigoss Liang/ Engineer Reviewed By: Lahm Peng / EMC Manager Approved & Authorized By: Jandy so / PSQ Manager Prepared By: Shenzhen SEM.Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM.Test Technology Co., Ltd. ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I PAGE 2 OF 19 FCC PART 15.231 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 3 1.2 TEST STANDARDS ................................................................................................................................................... 4 1.3 TEST METHODOLOGY ............................................................................................................................................. 4 1.4 TEST FACILITY ....................................................................................................................................................... 4 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 5 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 6 3. ANTENNA REQUIREMENT .................................................................................................................................. 7 3.1 STANDARD APPLICABLE ......................................................................................................................................... 7 3.2 TEST RESULT.......................................................................................................................................................... 7 4. RADIATED EMISSIONS ......................................................................................................................................... 8 4.1 MEASUREMENT UNCERTAINTY .............................................................................................................................. 8 4.2 STANDARD APPLICABLE ......................................................................................................................................... 8 4.3 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 9 4.4 TEST PROCEDURE ................................................................................................................................................... 9 4.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................ 10 4.6 ENVIRONMENTAL CONDITIONSFA ........................................................................................................................ 10 4.7 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 10 5. TRANSMISSION TIME ......................................................................................................................................... 15 5.1 STANDARD APPLICABLE ....................................................................................................................................... 15 5.2 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 15 5.3 TEST PROCEDURE ................................................................................................................................................. 15 5.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 15 5.5 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 15 6. DUTY CYCLE ......................................................................................................................................................... 17 6.1 STANDARD APPLICABLE ....................................................................................................................................... 17 6.2 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 17 6.3 TEST PROCEDURE ................................................................................................................................................. 17 6.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 17 6.5 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 17 ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 RE…

Text truncated - open the document above for the full version.

ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Radiation Emission Test Setup (Below 30MHz) Radiation Emission Test Setup (30MHz to 1GHz) ShenZhen Hunicom Electronics Co., Ltd Model: VPR-6700 REPORT NO.: STR14068225I FCC PART 15.231 Radiation Emission Test Setup (Above 1GHz)