2ACNNTGK-590Two Way Radio

User Manual Two way radio Brand name:TGKK Model name:TGK-590 FCC ID:2ACNNTGK-590 450-520MHz 4 ! 6 7 8 9 10 ! ! ! 7 12.5KHz 4.5 SAFETYTRAININGINFORMATION Your radio generators RF electromagnetic energy during transmit mode.This radio is designed for and classified as“Occupational Use Only”,meaning it must be used only during the course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the“General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for“Occupational Use Only”.Inaddition, your radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: � to Radio Frequency Electromagnetic Fields. � American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. � American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields– RF and Microwave. � The following accessories are authorized for use with this product. Use of accessories other than those (listed in the instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure. To ensure you’re your expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines T he information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as‐sure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure Attention: This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip). Do not use this device when antenna shows obvious damages Xiamen Teruite Electronic Technology co., Ltd. Xiamen Teruite Electronic Technology co., Ltd. Xiamen Teruite Electronic Technology co., Ltd.

Xiamen Teruite Electronic Technology co., Ltd. 3rd Floor, Block B, Xiangdian Agricultural Research Institute, Heshan, Huli District Xiamen City,China Tel: 0086-592-5239071 Fax: 0086-592-5233206 Sep.18.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Land Mobile Radio frequency TYPE OF QEUIPMENT: Licensed Non-Broadcast Transmitter Held to Face FCC ID: 2ACNNTGK-590 Dear Sir or Madam I attest that the product could program the frequence on computer through interface by manufacturer, is incapable of tuning, or readily being altered, by the end-user. Please contact the undersigned if you have any questions or need any further information. Regards Xiamen Teruite Electronic Technology co., Ltd. Signature: Name, Job Title and Dept.: HuaQing Ye / General Manager

Sep.18, 2014 Federal Communication Commission Authorization and Evaluation Division FCC ID: 2ACNNTGK-590 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5.Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Xiamen Teruite Electronic Technology co., Ltd. Contact person: HuaQing Ye Title: General manager

Sep.18, 2014 Federal Communication Commission Authorization and Evaluation Division Subject: FCC ID: 2ACNNTGK‐590 Justification Letter for Expanded Frequency Range 450‐520MHz Gentlemen; You have asked Xiamen Teruite Electronic Technology Co., Ltd. for justification to have the freq range 450‐520MHz appears on the face of the FCC Grant of Certification for a FCC Part 90 Certification. This frequency range is regarded as usual & customary by United States Federal Government and its various departments, user organizations and the military to appear on the face of the equipment Grant of Certification. Sincerely, Xiamen Teruite Electronic Technology Co., Ltd. Kazuhiro Kusuhara /Manager

External Photos ALL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location FCC RF Warning Label FCC ID: 2ACNNTGK-590

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT OPEN VIEW-3 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT

FCC ID APPLIC Produc Brand Model Client Date of STAND REPOR A CAUTIO This rep laborato CATION PUR ct Designati Name Name f Issue DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Rep : RPOSE : ion : : : : : : : tion of G ot be repro all not be q R Te port No.: A 2ACNNT G Original E Two way TGKK, DS TGK‐590, Xiamen T e Sep. 10,2 0 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC0220 GK‐590 Equipment radio R Pro DSR‐590, T G eruite Electr 014 1528:2003 2.1093 SI C95.1 Complia cept in full w of context. Rep 09140801 GK‐8A ronic Techno ance(Sh without the port 1FH01 ology Co., Ltd henzhen e written p t d. n) Co., L ermission Page 1 Ltd. of the test of 71 Report No.: AGC02209140801FH01 Page 2 of 71 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 10,2014 Valid Original Report App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturer N nufacturer A duct Name nd Name del Name erence Desc T Voltage plicable Stan t Date formed Loca port Templat e ess Name Address cription ndard ation te Tes Xiame 3rd Fl Distri c Xiame 3rd Fl Distri c Two w TGKK TGK-5 All the DC7.4 IEEE 47CF IEEE / Aug.2 Attest 2F, Bu Street AGCR Teste Check e Authoriz st Rep en Teruite E oor, Block B ct, Xiamen C en Teruite E oor, Block B ct, Xiamen C way radio K, DSR Pro 590, DSR-5 e same, exc 4V by batter Std. 1528:2 R § 2.1093 /ANSI C95.1 27,2014 tation of Glo uilding 2, No t, Bao'an Dis RT-EC-PTT/ d By ed By zed By port C lectronic Tec B, Xiangdian City, China lectronic Tec B, Xiangdian City, China 90, TGK-8A ept for the m ry 003 1 obal Complia o.1-No.4, Ch strict, Shenz /SAR (2014- Eric Zh Angela Solger Z Certific chnology Co n Agricultura chnology Co n Agricultura A model name ance (Shenz haxi Sanwei zhen, China -04-01) hou a Li hang Report cation o., Ltd. l Research o., Ltd. l Research . The test m zhen)Co., Ltd Technical In Sep. 10,201 Sep. 10,201 Sep. 10,201 No.: AGC02 n Institute, He Institute, He model is TGK d. ndustrial Pa 4 4 4 2209140801 Page 3 eshan Town, eshan Town, K-590. rk, Gushu, X FH01 of 71 Huli Huli Xixiang Report No.: AGC02209140801FH01 Page 4 of 71 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT Description .................................................................................................................................... 6 2.2. Test Procedure ...................................................................................................................................... 7 2.3. Test Environment ................................................................................................................................... 7 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8 3.1. Specific Absorption Rate (SAR) ............................................................................................................. 8 3.2. SAR Measurement Procedure ............................................................................................................... 9 3.3. COMOSAR System Description .......................................................................................................... 10 3.4. COMOSAR E-Field Probe ................................................................................................................... 12 3.5. Isotropic E-Field Probe Specification .................................................................................................... 12 3.6. Robot .................................................................................................................................................. 12 3.7. Video Positioning System .................................................................................................................... 13 3.8. Device Holder...................................................................................................................................... 13 3.9. Elliptic Phantom .................................................................................................................................. 14 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 15 4.1. The composition of the tissue simulating liquid ..................................................................................... 15 4.2. Tissue Calibration Result ..................................................................................................................... 16 4.3. Tissue Dielectric Parameters for Head and Body Phantoms ................................................................. 17 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 18 5.1. SAR System Validation Procedures ..................................................................................................... 18 5.2. SAR System Validation ........................................................................................................................ 19 6. EUT TEST POSITION ................................................................................................................................... 21 6.1. Body Worn Position ............................................................................................................................. 21 7. SAR EXPOSURE LIMITS ............................................................................................................................ 22 8. TEST EQUIPMENT LIST .......................................................…

Text truncated - open the document above for the full version.

Report No.: AGC02209140801FH01 Page 45 of 71 EUT PHOTOGRAPHS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC02209140801FH01 Page 46 of 71 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC02209140801FH01 Page 47 of 71 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC02209140801FH01 Page 48 of 71 RIGHT VIEW OF EUT OPEN VIEW OF EUT-1 Report No.: AGC02209140801FH01 Page 49 of 71 OPEN VIEW OF EUT-2 OPEN VIEW OF EUT-3 Report No.: AGC02209140801FH01 Page 50 of 71 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 Report No.: AGC02209140801FH01 Page 51 of 71 INTERNAL VIEW OF EUT-3 INTERNAL VIEW OF EUT-4 Report No.: AGC02209140801FH01 Page 52 of 71 APPENDIX D. PROBE CALIBRATION DATA Report No.: AGC02209140801FH01 Page 53 of 71 Report No.: AGC02209140801FH01 Page 54 of 71 Report No.: AGC02209140801FH01 Page 55 of 71 Report No.: AGC02209140801FH01 Page 56 of 71 Report No.: AGC02209140801FH01 Page 57 of 71 Report No.: AGC02209140801FH01 Page 58 of 71 Report No.: AGC02209140801FH01 Page 59 of 71 Report No.: AGC02209140801FH01 Page 60 of 71 Report No.: AGC02209140801FH01 Page 61 of 71 Report No.: AGC02209140801FH01 Page 62 of 71 APPENDIX E. DIPOLE CALIBRATION DATA Report No.: AGC02209140801FH01 Page 63 of 71 Report No.: AGC02209140801FH01 Page 64 of 71 Report No.: AGC02209140801FH01 Page 65 of 71 Report No.: AGC02209140801FH01 Page 66 of 71 Report No.: AGC02209140801FH01 Page 67 of 71 Report No.: AGC02209140801FH01 Page 68 of 71 Report No.: AGC02209140801FH01 Page 69 of 71 Report No.: AGC02209140801FH01 Page 70 of 71 Report No.: AGC02209140801FH01 Page 71 of 71

Page 1 of 57 FCC Part 90 Rules Test Report Report No.: AGC02209140801FE10 FCC ID : 2ACNNTGK‐590 PRODUCT DESIGNATION : Two way radio BRAND NAME : TGKK, DSR Pro MODEL NAME : TGK‐590, DSR‐590, TGK‐8A CLIENT : Xiamen Teruite Electronic Technology Co., Ltd. DATE OF ISSUE : Sep.11, 2014 STANDARD(S) : FCC Part 90 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC02209140801FE10 Page 2 of 57 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep.11, 2014Valid Original Report Report No.: AGC02209140801FE10 Page 3 of 57 VERIFICATION OF COMPLIANCE Applicant: Xiamen Teruite Electronic Technology Co., Ltd. 3rd Floor, Block B, Xiangdian Agricultural Research Institute, Heshan town, Huli District, Xiamen City, China Manufacturer: Xiamen Teruite Electronic Technology Co., Ltd. 3rd Floor, Block B, Xiangdian Agricultural Research Institute, Heshan town, Huli District, Xiamen City, China. Product Designation: Two way radio Brand Name: TGKK, DSR Pro Test Model TGK-590 Series Model DSR-590, TGK-8A Difference description All the same except for the model name. Date of Test: Sep.08, 2014 to Sep.10, 2014 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2009. The sample tested as described in this report is in compliance with the FCC Rules Part 90 requirements The test results of this report relate only to the tested sample identified in this report. Tested by Freddie Duan Sep.11, 2014 Checked By Kidd Yang Sep.11, 2014 Authorized By Solger Zhang Sep.11, 2014 Report No.: AGC02209140801FE10 Page 4 of 57 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................. 6 1.1 PRODUCT DESCRIPTION ............................................................................................................. 6 1.3 TEST METHODOLOGY ................................................................................................................. 7 1.4 TEST FACILITY .............................................................................................................................. 7 1.5 SPECIAL ACCESSORIES .............................................................................................................. 7 1.6 EQUIPMENT MODIFICATIONS ..................................................................................................... 7 2. SYSTEM TEST CONFIGURATION ..................................................................................................... 8 2.1 EUT CONFIGURATION .................................................................................................................. 8 2.2 EUT EXERCISE ............................................................................................................................. 8 2.3 GENERAL TECHNICAL REQUIREMENTS .................................................................................... 8 2.4 CONFIGURATION OF TESTED SYSTEM .................................................................................... 9 3. SUMMARY OF TEST RESULTS ....................................................................................................... 10 4. DESCRIPTION OF TEST MODES ..................................................................................................... 11 5. CONDUCTED LIMITS ........................................................................................................................ 12 5.1 PROVISIONS APPLICABLE ......................................................................................................... 12 5.2 MEASUREMENT PROCEDURE .................................................................................................. 12 5.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 13 5.4 TEST EQUIPMENT USED ............................................................................................................ 13 5.5 TEST RESULT .............................................................................................................................. 14 6. FREQUENCY TOLERANCE .............................................................................................................. 16 6.1 PROVISIONS APPLICABLE ......................................................................................................... 16 6.2 MEASUREMENT PROCEDURE .................................................................................................. 16 6.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 17 6.4 TEST EQUIPMENT USED: ........................................................................................................... 17 6.5 TEST RESULT .............................................................................................................................. 18 7. EMISSION BANDWIDTH ................................................................................................................... 18 7.1 PROVISIONS APPLICABLE ......................................................................................................... 21 7.2 MEASUREMENT PROCEDURE .................................................................................................. 21 7.3 TEST SETUP BLOCK DIAGRAM ................................................................................................. 21 7.4 MEASUREMENT EQUIPMENT USED: ........................................................................…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION TEST SETUP CONDUCTED EMISSION TEST SETUP