2ACPR-W7421Tablet PC

1 Tablet PC W7421 User manual Important Declaration 1. Before using the tablet PC, please read all information provided by us first so that you can use this product correctly. Please make sure that you have read this manual carefully before using this product. 2. Our company reserves the copyright of this manual, any random duplication or interpretation of the full or partial manual is forbidden in commercial activities. 3. The information covered in this manual is all based on the latest information when compiling the manual, and products are subject to change without notice for further improvement. We are not committed to any mistakes or 2 incidences caused by the manual. For additional product information, visit the company’s web site. 4. When using this product, please make backup for the data by yourself and this company will just be responsible for the product's hardware itself, and will not undertake any responsibility for any loss or damage of personal data and information due to wrong operations of hardware. Precautions This manual includes important information on safety precautions and proper usage of this product. To prevent any accident, please make sure that you have read this manual carefully before using this product.  Do not keep this product in a place with a high temperature, humidity or too much dust. Especially 3 do not place this product in a car with all windows closed in summer, and keep out direct sunlight.  Avoid dropping or shocking this product heavily and avoid shaking the TFT display violently, otherwise, the TFT display may be damaged or cannot play correctly.  Please choose a suitable volume. Avoid excessively high volume when using a headset. If you feel any ear noise, please decrease the volume or stop using.  Do not break the connection suddenly when this product is conducting formatting, uploading or downloading operations, otherwise there may be program errors.  This company will not undertake any responsibility for any memory loss due to product damage, repairing or other reasons. 4  Do not dissemble this product by yourself and do not clean the surface of this product with alcohol, thinner or benzene.  Do not use this product in a place where the using of electronic device is prohibited, such as on a plane.  Do not use this product while driving a car or walking on the street, otherwise traffic accident may occur. ※ This Company reserves the right to make any improvement on this product. No further notice will be provided on any variation on the specification and design of this product! ★ (This product has no water-proof function) 5 Main functions: ●7 inch HD TFT capacitive screen, 1024*600 definiton; ●Support built-in 0.3 Mega front camera and 2 Mega rear camera (optional); ●Support microphone recording function. ●Support USB mouse, keyboard, bluetooth headset, USB peripherals, operation more convenient, more powerful. ●Support OTG function, support U-disc, portable hard disc by OTG to transfer data. (While connecting to portable hard disc, DC power must be connected to supply power for the product; otherwise the tablet PC will get crashed due to insufficient power supply) 6 ●Multiple network access to the Internet. Supporting Wi-Fi, you can enjoy the internet life anywhere, anytime. ●Gravity sensor (G-sensor), in addition to the horizontal, vertical screen switch, you can also install various software to extent this function, such as turning the text, switching songs, and funny games, etc. ●With Google Android intelligent operating system, abundant software extension function, you can you're your personalized space with apks by yourself. ●Supporting apk installation and application, abundant software can be downloaded and installed from Google player store in your MID or from your PC to download from the Internet. 7 ●With this product, you can easily have business and entertainment via abundant applications, such as E-Mail, word, website browsing, news, instant messaging, financial, blog, games online, video online, stock market , weather report , mobile TV, maps, fun software, etc. ●Supporting MP3,WMA,MP2,OGG,AAC,M4A,MA4,FLAC,APE,3GP, WAV etc. ● Supporting full HD video decoding Mpeg1, Mpeg2, Mpeg4 SP/ASP GMC, XVID, H.263, H.264 BP/MP/HP, WMV7/8, WMV9/VC1 BP/MP/AP, VP6/8, AVS, JPEG/MJPEG etc. ● Supporting JPG, JPEG, GIF, BMP, PNG ● Supporting TF Card, with capacity up to 32GB. ● Personalized settings-freely adjustable brightness, key tone on or off, changing wallpaper and so on. 8 ● Supporting multi-languages. ● More functions could be added by Firmware updating Appearance and Buttons: Definition： 1．USB Port: Micro USB 5 Pin data cable supports external 2．Earphone Jack 9 3．“V+”：Volume up； 4.“V-”：Volume down； 5．“ ”：Power Button--long press this button to turn On/Off the player, short press this button to lock screen in order to avoid operation error. 6．Front 0.3MP camera 1.Quick Start： 1-1．Power On/Off and unlock: At the status of power off, long press “ ” for three seconds to turn on. It will take some time to power on, please wait. It will take about 100 seconds to enter system, drag unlock icon “ ” to the camera icon on the left to take photo and to the unlocking icon on the right to unlock, see below. Energy-saving and locking mode：at the process of using, system will automatically enter energy-saving mode, press 10 “” to wake up the screen, system will enter unlocking mode in one second, slip “ ” to unlock. Notes: At the status of energy saving mode, the main operation won’t stop, only LCD screen will be off, showing black screen. Music or film continues playing. Power Off: At the status of using, press “ ” for 5 seconds, the screen will show power off option. Select “Power off” option, confirm your choice and system will automatically turn 11 off. Select “Cancel” to cancel power off operation. 1-2．Battery and Charge Battery should be charged for 8 to 12 hours for the first time in order to make sure battery with enough power. Please …

Text truncated - open the document above for the full version.

Shenzhen Bmorn Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2015-09-15 SUBJECT: FCC Application for ( FCC ID: 2ACPR-W7421) To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. We understand that devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm Select the "accredited" option to search for FCC recognized accredited test firms. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. Regards, Signatory Client’s name / title : Tang shaofeng / Manager Contact information / address : 5/F, Hengfang Veteran Industrial Park, Xingye Road, Xixiang, Bao'an, Shenzhen, China.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Shenzhen Bmorn Technology Co., Ltd. 2015/09/15 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, ___ Shenzhen Bmorn Technology Co., Ltd._ _hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product： Tablet PC Trade Name： Bmorn Model Name： W7421 Serial Model： W7413,W7406,W740,W7405,W7409, W7416,W7422,W7423,W7424,W7425, W7426,W7427,W7428,W7429,W8419, W8420,W8407,W8410 ,W1415 FCC ID： 2ACPR-W7421 Sincerely, Client’s name / title : Tang shaofeng / Manager Contact information / address : 5/F, Hengfang Veteran Industrial Park, Xingye Road, Xixiang, Bao'an, Shenzhen, China.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 Shenzhen Bmorn Technology Co., Ltd. 2015/09/15 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ACPR-W7421 We hereby request confidential treatment of information accompanying this application as outlined below: - . Block Diagram - Schematics - Operational Description - BOM - - tune up procedure - The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Tang shaofeng / Manager Contact information / address : 5/F, Hengfang Veteran Industrial Park, Xingye Road, Xixiang, Bao'an, Shenzhen, China.

Shenzhen Bmorn Technology Co.,Ltd. Model Difference FCC ID: 2ACPR-W7421 Model : W7421, W7413,W7406,W740,W7405,W7409,W7416,W7422,W7423, W7424,W7425,W7426,W7427,W7428,W7429,W8419,W8420,W8407,W8410 , W1415 All the model are the same circuit and RF module,except the model name and colour. Regards, Client’s signature Client’s name / title : Tang shaofeng / Manager Contact information / address : 5/F, Hengfang Veteran Industrial Park, Xingye Road, Xixiang, Bao'an, Shenzhen, China.

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

FCC ID LABELING AND LOCATION FCC ID Label Tablet PC Model NO.: W7421 FCC ID: 2ACPR-W7421 Shenzhen Bmorn Technology Co.,Ltd. Made in China This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 BT/WIFI/GPS ANT Photo 3 Photo 4 2G/3G ANT Photo 5 Photo 6 Photo 7 Photo 8

In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2003 FCC SAR EVALUATION REPORT Product Name： Tablet PC Trademark： Bmorn Model Name： W7421 Serial Model： W7413, W7406, W740, W7405, W7409, W7416, W7422, W7423, W7424, W7425, W7426, W7427， W7428, W7429, W8419, W8420, W8407, W8410 , W1415 Report No.： NTEK-2015NT08242551HF FCC ID： 2ACPR-W7421 Prepared for Shenzhen Bmorn Technology Co.,Ltd 5F, HengFang Verteran Industrial Zone, XingYe Road, XiXiang Bao'an, ShenZhen, Guangdong, China. Tel.: 0755-85266966 Fax.: 0755-85265899 E-mail: [email protected] Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China Tel.: +86-0755-61156588 Fax.: +86-0755-61156599 Website: www.ntek.org.cn Page 2 of 116 Report No.: NTEK-2015NT08242551HF TEST RESULT CERTIFICATION Applicant’s name .......... Shenzhen Bmorn Technology Co.,Ltd Address .......................... 5F, HengFang Verteran Industrial Zone, XingYe Road, XiXiang Bao'an, ShenZhen, Guangdong, China. Manufacture's Name .... Shenzhen Bmorn Technology Co.,Ltd Address .......................... 5F, HengFang Verteran Industrial Zone, XingYe Road, XiXiang Bao'an, ShenZhen, Guangdong, China. Product description Product name ................. Tablet PC Trademark .................... Bmorn Model and/or type reference ...................... W7421 Serial Model ................... W7413, W7406, W740, W7405, W7409, W7416, W7422, W7423, W7424, W7425, W7426, W7427， W7428, W7429, W8419, W8420, W8407, W8410 , W1415 Standards ...................... FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2003 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2003 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ....... Sep 07, 2015 ~ Sep 09, 2015 Date of Issue .................................... Sep 11, 2015 Test Result ........................................ Pass Testing Engineer : (Cheng Jiawen) Technical Manager : (Brown Lu) Authorized Signatory : (Sam Chen) Page 3 of 116 Report No.: NTEK-2015NT08242551HF ※※ Revision History ※※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Sep 11, 2015 Cheng Jiawen Page 4 of 116 Report No.: NTEK-2015NT08242551HF TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 8 1.4. Test specification(s) .................................................................................. 9 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set‐up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E‐Field Probe .......................................................................................... 12 2.3.1. E‐Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 13 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 18 3.1. Power Reference ................................................................................... 18 3.2. Area scan & Zoom scan .......................................................................... 18 3.3. Description of interpolation/extrapolation scheme .............................. 20 3.4. Volumetric Scan ..................................................................................... 20 3.5. Power Drift ............................................................................................ 20 4. System Verification Procedure .......................................................................... 21 4.1. Tissue Verification ................................................................................. 21 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 21 4.2. System Verification Procedure .............................................................. 22 4.2.1. System Verification Results .............................................................. 23 5. SAR Measurement variability and uncertainty .................................................. 24 5.1. SAR measurement variability ....…

Text truncated - open the document above for the full version.

FCC RADIO TEST REPORT FCC ID: 2ACPR-W7421 Product：Tablet PC Trade Name：Bmorn Model Number：W7421 Serial Model： W7413,W7406,W740,W7405,W7409, W7416,W7422,W7423,W7424,W7425, W7426,W7427,W7428,W7429,W8419, W8420,W8407,W8410 ,W1415 Report No.：NTEK-2015NT08242551F4 Prepared for Shenzhen Bmorn Technology Co.,Ltd. 5/F, Hengfang Verteran Industrial Park,Xingye Road, Xixiang, Bao'an,Shenzhen, Guangdong,China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen P.R. China Tel.: +86-0755-61156588 Fax.: +86-0755-61156599 Website:www.ntek.org.cn Report No.: NTEK-2015NT08242551F4 Page 2 of 61 TEST RESULT CERTIFICATION Applicant’s name .................... : Shenzhen Bmorn Technology Co.,Ltd. Address .................................... : 5/F, Hengfang Verteran Industrial Park,Xingye Road, Xixiang, Bao'an,Shenzhen, Guangdong,China Manufacture's Name............... : Shenzhen Bmorn Technology Co.,Ltd. Address .................................... : 5/F, Hengfang Verteran Industrial Park,Xingye Road, Xixiang, Bao'an,Shenzhen, Guangdong,China Product name .............................: Tablet PC Model and/or type reference ... : W7421 Serial Model： W7413,W7406,W740,W7405,W7409,W7416,W7422, W7423,W7424,W7425,W7426,W7427,W7428,W7429,W8419, W8420,W8407,W8410 ,W1415 Standards ................................ : FCC Part 22H and 24E: 01 Oct. 2014 Test procedure .............................. TIA/EIA 603D This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personnel only, and shall be noted in the revision of the document. Date of Test .......................................... . Date (s) of performance of tests ........... . 24 Aug. 2015 ~06 Sep. 2015 Date of Issue ........................................ . 06 Sep. 2015 Test Result ............................................ . Pass Testing Engineer : (Eileen Liu) Technical Manager : (Brown Lu) Authorized Signatory : (Sam Chen) Report No.: NTEK-2015NT08242551F4 Page 3 of 61 TABLE OF CONTENTS 1. GENERAL INFORMATION ............................................................................................................................ 5 1. GENERAL INFORMATION ............................................................................................................................ 5 1.1 PRODUCT DESCRIPTION................................................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ........................................................................................................................... 6 1.3 TEST METHODOLOGY ....................................................................................................................................................... 6 1.4 TEST FACILITY ..................................................................................................................................................................... 6 1.5 MEASUREMENT INSTRUMENTS ..................................................................................................................................... 6 1.6 SPECIAL ACCESSORIES ................................................................................................................................................... 6 1.7 EQUIPMENT MODIFICATIONS .......................................................................................................................................... 6 2. SYSTEM TEST CONFIGURATION ............................................................................................................... 7 2.1 EUT CONFIGURATION ........................................................................................................................................................ 7 2.2 EUT EXERCISE ..................................................................................................................................................................... 7 2.3 GENERAL TECHNICAL REQUIREMENTS ...................................................................................................................... 7 2.4 CONFIGURATION OF EUT SYSTEM .............................................................................................................................. 8 3. SUMMARY OF TEST RESULTS ................................................................................................................... 9 4. DESCRIPTION OF TEST MODES................................................................................................................. 9 5. OUTPUT POWER ........................................................................................................................................ 10 5.1 Conducted Output Power ................................................................................................................................................ 10 5.2 Radiated Output Power .................................................................................................................................................... 15 NOTE 1: IN THE PART, RESULT THE WORST CASE GPRS 1SLOT FOR GSM 850 AND PCS1900, AND RMC 12.2KBPS FOR BAND II AND BAND V. .............................................................................................. 17 6. SPURIOUS EMISSION ................................................................................................................................ 18 6.1 CONDUCTED SPURIOUS EMISSION ...........................................................................................................…

Text truncated - open the document above for the full version.

Report No.: NTEK-2015NT08242551F4 Page 61 of 61 PHOTOGRAPHS OF TEST SETUP RADIATED SPURIOUS EMISSION