2ACRAHX-DU1006DWireless Data Transceiver Module

[HX-DU1006D User Manual] Harxon Corporation 1 HX-DU1006D Wireless data transceiver User Manual Version: V1.0 [HX-DU1006D User Manual] Harxon Corporation 2 CONTENTS 1 SUMMARY ........................................................................................................................................... 4 1.1 Frequency Range ................................................................................................................. 4 1.2 Operating Mode .................................................................................................................. 4 1.3 Application .......................................................................................................................... 4 2 INSTALLATION DESIGN ................................................................................................................... 5 2.1 Installation of Radio ............................................................................................................ 6 2.2 Main Power Supply (3.3 Vdc) ............................................................................................. 6 2.3 Data Interface Connector .................................................................................................... 7 3 RADIO MODEM CONFIGURATION AND DIAGNOSTIC COMMANDS ...................................... 8 3.1 Errors Messages .................................................................................................................. 9 3.2 Initialize Configuration ....................................................................................................... 9 4 TROUBLESHOOTING ...................................................................................................................... 10 5 TECHNICAL SPECIFICATIONS ...................................................................................................... 10 [HX-DU1006D User Manual] Harxon Corporation 3 Copyright Information This products operation manual and all the related software are protected by Harxon Corporation, and all rights reserved. All rights of this manual include copyright only belongs to Harxon Corporation (short for Harxon as below), unless the copyright holders allowed, strictly forbid to copy this manual by printing、copying、 recording and other means. Disclaimer We strive to guarantee the accuracy and completeness of this manual content when compiling, but for possible errors or omissions, Harxon will not assume any responsibility. Due to the continuous development of technology, Harxon reserves the rights to change the technical specifications or functions of their products without any notification to users. Antenna Installation Warning 1. Any antenna only can be installed and maintained by professional technician. Please make sure that the radio station is closed when you maintain or work nearby the antenna. 2. In general, data transmitter module will be connected to a directional (high-gain) antenna. Under normal circumstance, only the professional technicians can close to the antenna area, anyone can’t touch the antenna or close to 0.6m in diameter range of the antenna. Antenna Gain vs Safe distance recommended Antenna Gain 0–5 dBi 5–10 dBi 10–16.5 dBi The minimum safe distance 0.6m 1.06m 2.3m The product's antenna gain is 3.5dBi. [HX-DU1006D User Manual] Harxon Corporation 4 1 Summary This manual is the installation and operating instructions of HX-DU1006D wireless data transceiver. HX-DU1006D is a universal wireless data transceiver module, adopted compact、modular plat-shaped structure, which is very suitable for designer-users to integrate RTUs、PLCs、banking automation equipments or similar devices. Figure 1 HX-DU1006D Data transceiver 1.1 Frequency Range HX-DU1006D operating frequency range is 410MHz~470MHz，frequency of transmitting and receiving can be set by programming. 1.2 Operating Mode Half-duplex mode is sending data for master transmitter input, receiving data if no input. When HX-DU1006D operates in half-duplex mode, emission will be started when data appears. Note: HX-DU1006D does not support duplex operating (Such as transmitting and receiving simultaneously). 1.3 Application Radio modem apply to point to multi-point and point to point and other applications, one point to multi-point (MAS) is the most common application of radio, which consists of a central master station and several related remote units, like figure 2. MAS network supply communication between a central host and remote terminal units (RTUs) or other data acquisition equipments. As to computer equipments, the radio operating is transparent, so, radio transmitting data as its original form, there is no change in the data format. [HX-DU1006D User Manual] Harxon Corporation 5 Figure 2 MAS one point to multi-point network Point to point system In the case of licensed, HX-DU1006D can be configured as point to point system, which consists of two radios: one on the host, and the other on remote terminal units, detailed as figure 3. Data transmitting between two points of this system can set up simplex or half-duplex communication connection. Figure typically point to point connection 2 Installation design This radio has two connection ports: one is the board to board connector which supplies the data interface and DC power line; another is the 50ohm RF connector. To get a good connection, the RF connector and board to board connector should be applied some pressure. Figure 4 shows the external connection interface of radio modem. [HX-DU1006D User Manual] Harxon Corporation 6 Figure 4 external connection interface All circuits of radio modem are masked in a shielded box, to reduce interference to nearby products. Transmitter can be set as transmitting 1W RF output power, so in order to reducing the RF interference to nearby electronic equipments, carefully choosing and designing the RF transmission path is very important. 2.1 Installation of Radio Figure 5 shown the installation d…

Text truncated - open the document above for the full version.

Ersteller: U. Rodemeier Revision: 03 Erstelldatum: 03.08.01 Datum: 16.01.08 Seite 1 von 1 HARXON CORPORATION PHOENIX TESTLAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg RE : LETTER OF AGENCY AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Huatongwei International Inspection Co., Ltd, Hans Hu to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. This agreement is valid for one year or until further notice. Sincerely, Signatory Connect name: DAVID WU Applicant / Company Stamp: HARXON CORPORATION Date: July 01, 2014

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 02.01.2012 Datum: 00.00.0000 Seite 1 von 1 Long/Short-term Confidentiality Request PHOENIX TESTLAB GmbH Date: 10 July 2014 Product Certification Königswinkel 10 D 32825 Blomberg FCC ID: 2ACRAHX-DU1006D To Whom it may concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagram Tune-Up Info Operational Description In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentilality) withheld from the public disclosure for an initial period of days until: not applicable External Photos Test Setup Photos Internal Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. Thank you for your attention in this matter. Signatory Connect name: DAVID WU Applicant / Company Stamp: HARXON CORPORATION Date: July 01, 2014

HARXON CORPORATION Justification Letter DATE: July 18, 2014 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Colombia, Maryland 21046 FCC ID: 2ACRAHX‐DU1006D Model: HX‐DU1006D, HX‐DU1006T, HX‐DU1006R, HX‐DU1080D to HX‐DU1098D, HX‐DU1080T to HX‐DU1098T, HX‐DU1080R to HX‐DU1098R Dear Sir/Madam, We, HARXON CORPORATION acknowledge that this device will not be marketed to USA users with the frequency band which is not allowed by rule part 90.and it is a violation of FCC rules if this device is operated on unauthorised frequencies inside the U.S.A. We, HARXON CORPORATION acknowledge this equipment meets the requirements of FCC Rules, Parts 90.203 (e) and (g) as applicable. Programming of this product's transmit frequencies can be performed ONLY by the manufacturer or by service or maintenance personnel. The operator cannot program transmit frequencies using the equipment's external operation. Sincerely yours, Signatory Connect name: DAVID WU Applicant / Company Stamp: HARXON CORPORATION Date: July 18, 2014

HARXON CORPORATION 07-25-2014 Product name:Wireless data transceiver module FCC ID:2ACRAHX-DU1006D is seeking FCC Authorization as a Single Modular transmitter / Single Limited Modular Approval (Please check one). The EUT meets the requirements for Single Modular approval / Single Limited Modular Approval (please check one) as detailed in FCC public Notice DA00-1407. Compliance to each of the requirements is described below : Questions are: 1. “The modular transmitter must have its own RF shielding.” Yes / No 2. “The modular transmitter must have buffered modulation/data inputs.” Yes / No 3. “The modular transmitter must have its own power supply regulation.” Yes / No 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c).” Yes / No 5. “The modular transmitter must be tested in a stand-alone configuration.” Yes / No 6. “The modular transmitter must be labeled with its own FCC ID number.” Yes / No 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacture must provide adequate instruction along with the module to explain any such requirements.” Yes / No 8. “The modular transmitter must comply with any applicable RF exposure requirements.” Yes / No Note: (1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured. (2) Host devices which contain separately certified modules do not need to be recertified, provided that they meet the following conditions: (i) The host device, as a stand-alone unit without any separately certified modules, complies with all applicable Radio Standards Specifications. (ii) The host device and all the separately certified modules it contains jointly meet the RF exposure compliance requirements of RSS-102, if applicable. (iii) The host device complies with the certification labeling requirements of each of the modules it contains. Connect name: DAVID WU Applicant / Company Stamp: HARXON CORPORATION Date: July 25, 2014

Label location

Label

TEST REPORT Report Reference No. .................... : TRE1404007602 R/C..........: 66283 FCC ID ............................................. : 2ACRAHX-DU1006D Applicant’s name ........................... : HARXON CORPORATION Address ............................................. : 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC Manufacturer......................................: HARXON CORPORATION Address...............................................: 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC Test item description .................... : Wireless data transceiver module Trade Mark ....................................... : Harxon Model/Type reference ....................... : HX-DU1006D Listed Model(s) ................................. : HX-DU1006T,HX-DU1006R,HX-DU1080D to HX-DU1098D, HX-DU1080T to HX-DU1098T,HX-DU1080R to HX-DU1098R. Standard ......................................... : FCC Per 47 CFR 2.1091(b) KDB447498 v05r01 Date of receipt of test sample...........: Apr 21, 2014 Date of testing..............................: Apr 21, 2014- Jun 24, 2014 Date of issue.................................: Jun 24, 2014 Result .................. ........................: PASS Compiled by ( position+printed name+signature) .. : File administrators Vivi Zhou Supervised by ( position+printed name+signature) .. : Project Engineer Eric Wang Approved by ( position+printed name+signature) .. : RF Manager Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Report No.: TRE1404007602 Page 2 of 7 Contents 1. SUMMARY 3 1.1. Client Information 3 1.2. Product Description 3 1.3. EUT operation mode 4 1.4. EUT configuration 4 1.5. Modifications 4 2. TEST ENVIRONMENT 5 2.1. Address of the test laboratory 5 2.2. Environmental conditions 5 2.3. Statement of the measurement uncertainty 5 3. METHOD OF MEASUREMENT 5 3.1. Applicable Standard 5 3.2. Limit 6 3.3. MPE Calculation Method 6 4. CONCLUSION 7 Report No.: TRE1404007602 Page 3 of 7 1. Summary 1.1. Client Information Applicant: HARXON CORPORATION Address: 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC Manufacturer: HARXON CORPORATION Address: 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC 1.2. Product Description Name of EUT: Wireless data transceiver module Trade Mark: Harxon Model/Type reference : HX-DU1006D Listed Model(s): HX-DU1006T,HX-DU1006R,HX-DU1080D to HX-DU1098D, HX-DU1080T to HX-DU1098T,HX-DU1080R to HX-DU1098R Operation frequency: From 410 MHz to 470 MHz Rated Output Power maximum rated power ：1 Watts minimum rated power ：0.5 Watts Channel separation: 12.5KHz Modulation: 4FSK&GMSK Power supply: DC 3.3V Report No.: TRE1404007602 Page 4 of 7 1.3. EUT operation mode The EUT has been tested under typical operating condition and The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. EUT operation mode no. Description of operation mode Additional information Op 1 4FSK+BW12.5KHz+TX The equipment is set with 4FSK modulation and 12.5KHz bandwidth at maximum rated power for TX Mode,powered by DC 3.30V Op2 4FSK+BW12.5KHz+TX The equipment is set with 4FSK modulation and 12.5KHz bandwidth at minimum rated power for TX Mode,powered by DC 3.30V Op 3 GMSK+BW12.5KHz+TX The equipment is set with GMSK modulation and 12.5KHz bandwidth at maximum rated power for TX Mode,powered by DC 3.30V Op 4 GMSK+BW12.5KHz+TX The equipment is set with GMSK modulation and 12.5KHz bandwidth at minimum rated power for TX Mode,powered by DC 3.30V Op 5 4FSK+BW12.5KHz+TX The equipment is set with 4FSK modulation and 12.5KHz bandwidth for RX Mode,powered by DC 3.30V Op 6 GMSK+BW12.5KHz+TX The equipment is set with GMSK modulation and 12.5KHz bandwidth for RX Mode,powered by DC 3.30 1.4. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ● - supplied by the manufacturer ○ - supplied by the lab ○ Power Cable Length (m) : / Shield : / Detachable : / ○ Multimeter Manufacturer : / Model No. : / 1.5. Modifications No modifications were implemented to meet testing criteria. Report No.: TRE1404007602 Page 5 of 7 2. TEST ENVIRONMENT 2.1. Address of the test laboratory Shenzhen Huatongwei International Inspection Co., Ltd Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Phone: 86-755-26715686 Fax: 86-755-26748089 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 (2009) and CISPR Publication 22. 2.2. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15-35 ° C Humidity: 30-60 % Atmospheric pressure: 950-1050mbar 2.3. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to TR-100028-01” Electromagnetic compatibility and Radio spectrum Matt…

Text truncated - open the document above for the full version.

TEST REPORT Report Reference No. .................... : TRE1404007601 R/C..........: 66283 FCC ID ............................................. : 2ACRAHX-DU1006D Applicant’s name ........................... : HARXON CORPORATION Address ............................................. : 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC Manufacturer......................................: HARXON CORPORATION Address...............................................: 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC Test item description .................... : Wireless data transceiver module Trade Mark ....................................... : Harxon Model/Type reference ....................... : HX-DU1006D List Model ......................................... : HX-DU1006T,HX-DU1006R,HX-DU1080D to HX-DU1098D, HX-DU1080T to HX-DU1098T,HX-DU1080R to HX-DU1098R. Standard ......................................... : FCC Part 90/FCC Part 2/ FCC Part 15B Date of receipt of test sample...........: Apr 21, 2014 Date of testing..............................: Apr 21, 2014- Jun 24, 2014 Date of issue.................................: Jun 24, 2014 Result .................. ........................: PASS Compiled by ( position+printed name+signature) .. : File administrators Vivi Zhou Supervised by ( position+printed name+signature) .. : Project Engineer Eric Wang Approved by ( position+printed name+signature) .. : RF Manager Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Report No.: TRE1404007601 Page 2 of 56 Contents 1. TEST STANDARDS AND TEST DESCRIPTION .......................................... 3 1.1. Test Standards 3 1.2. Test Description 3 2. SUMMARY ............................................................................... 4 2.1. Client Information 4 2.2. Product Description 4 2.3. EUT operation mode 5 2.4. EUT configuration 5 2.5. Modifications 5 3. TEST ENVIRONMENT .................................................................... 6 3.1. Address of the test laboratory 6 3.2. Test Facility 6 3.3. Environmental conditions 7 3.4. Statement of the measurement uncertainty 7 3.5. Equipments Used during the Test 8 4. TEST CONDITIONS AND RESULTS .................................................... 10 4.1. Conducted Emissions Test 10 4.2. Maximum Transmitter Power 13 4.3. Occupied Bandwidth and Emission Mask Test 18 4.4. Frequency Stability Test 28 4.5. Transmitter Frequency Behavior 31 4.6. Spurious Emssion on Antenna Port 33 4.7. Transmitter Radiated Spurious Emssion 41 4.8. Modulation Charcateristics 45 4.9. Receiver Radiated Spurious Emssion 46 4.10. Receiver Conducted Spurious Emssion 50 Report No.: TRE1404007601 Page 3 of 56 1. Test standards and Test description 1.1. Test Standards The tests were performed according to following standards: FCC Rules Part 90 : 10-01-2013 : PRIVATE LAND MOBILE RADIO SERVICES. TIA/EIA 603 D: June 2010: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. 47 CFR FCC Part 15 Subpart B: 10-01-2013 - Unintentional Radiators FCC Part 2: 10-01-2013: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS 1.2. Test Description Test Item Test specification clause Result Conducted Emission FCC Part 15.107 Pass Maximum Transmitter Power FCC Part 90.205 Pass Modulation Characteristic FCC Part 90.207 N.A Occupied Bandwidth FCC Part 90.209 Pass Emission Mask FCC Part 90.210 Pass Frequency Stability FCC Part 90.213 Pass Transmitter Frequency Behavior FCC Part 90.214 Pass Transmitter Radiated Spurious Emssion FCC Part 90.210 Pass Spurious Emssion On Antenna Port FCC Part 90.210 Pass Receiver Radiated Spurious Emssion FCC Part 15.109 Pass Receiver Conducted Spurious Emssion FCC Part 15.109 Pass Report No.: TRE1404007601 Page 4 of 56 2. Summary 2.1. Client Information Applicant: HARXON CORPORATION Address: 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC Manufacturer: HARXON CORPORATION Address: 6/F, Block B, D3 Building, TCL International E City, No. 1001 Zhongshanyuan Road, Nanshan District, Shenzhen，518055，PRC 2.2. Product Description Name of EUT: Wireless data transceiver module Trade Mark: Harxon Model/Type reference : HX-DU1006D List Model: HX-DU1006T,HX-DU1006R,HX-DU1080D to HX-DU1098D, HX-DU1080T to HX-DU1098T,HX-DU1080R to HX-DU1098R Operation frequency: From 410 MHz to 470 MHz Rated Output Power maximum rated power ：1 Watts minimum rated power ：0.5 Watts Channel separation: 12.5KHz Modulation: 4FSK&GMSK Power supply: DC 3.3V Report No.: TRE1404007601 Page 5 of 56 2.3. EUT operation mode The EUT has been tested under typical operating condition and The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. EUT operation mode no. Description of operation mode Additional information Op 1 4FSK+BW12.5KHz+TX The equipment is set with 4FSK modulation and 12.5KHz bandwidth at maximum rated power for TX Mode,powered by DC 3.30V Op2 4FSK+BW12.5KHz+TX The equipment is set with 4FSK modulation and 12.5KHz bandwidth at minimum rated power for TX Mode,powered by DC 3.30V Op 3 GMSK+BW1…

Text truncated - open the document above for the full version.

Test Setup Photos of the EUT