2ACSDGC859167AM2SB5CC434

WTD 13.4.9 FCC Compliance Opinion DANA0012 Information about the Applicant Grantee (Company Name) Dana Innovations FCC Contact Person Lucian Scripca Address 212 Avenida Fabricante City, State, Zip San Clemente, CA 92672 Job Number DANA0012 Model AM2SB5CC434 FCC ID 2ACSDGC859167 Agent Rob Roland Approval Type Original Equipment Class DSC Part 15, Remote Control/Security Device Transmitter Rule Part 15.231 Overview The model AM2SB5CC434 is a battery powered remote control with can be handheld or mounted. The PJ-xBxx contains an integrated micro controller and transmitter with an internal oscillator at 3.9GHz. There is a second timing source on the IC that runs at 24MHz and is the clock for the MCU core. The MCU ensures all transmissions automatically cease within 5 seconds of a button release or within 5 seconds on the beginning of a transmission. The 12MHz crystal is used to calibrate the 3.9GHz oscillator, which is used to generate the carrier frequency. Modulation is FM, sometimes referred to as Frequency Shift Keyed (FSK), data at 62.5kbps. The antenna is permanently attached and cannot be modified or replaced by the user since it is integrated in the printed circuit board. Confidentiality requested for allowed files. Request is properly addressed and referenced. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Dave Tolman, TCB Committee 8/4/2014

DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 External Photos DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672

DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 Label and Location (FCC ID) DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672

DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 Internal Photos DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672

1 DANA INNOVATIONS 212 AVENIDA FABRICANTE SAN CLEMENTE CA 92672 Antenna Info There is only on antenna which is not detachable and it is printed loop. Antenna gain is ‐11dBi for the range 431‐437 MHz and ‐ 2dBi for the range 868‐869.85 MHz.

Dana Innovations AM.2 Clear Connect Sleeve Top FCC 15.231:2014 Report #: DANA0012.1 Report Prepared By Northwest EMC Inc. NORTHWEST EMC – (888) 364-2378 – www.nwemc.com California – Minnesota – Oregon – New York – Washington WTD 12.5.23 CERTIFICATE OF TEST Last Date of Test: July 01, 2014 Dana Innovations Model: AM.2 Clear Connect Sleeve Top Emissions Test Description Specification Test Method Pass/Fail Duty Cycle FCC 15.231:2014 Class B ANSI C63.10:2009 Pass Occupied Bandwidth FCC 15.231:2014 Class B ANSI C63.10:2009 Pass Field Strength of Fundamental FCC 15.231:2014 Class B ANSI C63.10:2009 Pass Spurious Radiated Emissions FCC 15.231:2014 Class B ANSI C63.10:2009 Pass Deviations From Test Standards None Approved By: Victor Ratinoff, Operations Manager NVLAP Lab Code: 200676-0 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. REV 2012.08.02 REVISION HISTORY Revision Number Description Date Page Number 00 None Barometric Pressure The recorded barometric pressure has been normalized to sea level. REV 2012.05.24 ACCREDITATIONS AND AUTHORIZATIONS United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC Guide 65 as a product certifier. This allows Northwest EMC to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada IC - Recognized by Industry Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with IC. European Union European Commission – Validated by the European Commission as a Conformity Assessment Body (CAB) under the EMC directive and as a Notified Body under the R&TTE Directive. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea KCC / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Hong Kong OFTA – Recognized by OFTA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. Russia GOST – Accredited by Certinform VNIINMASH, CERTINFO, SAMTES, and Federal CHEC to perform EMC and Hygienic testing for Information Technology products to GOST standards. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ REV 2013.03.8 MEASUREMENT UNCERTAINTY Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document WP 342. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty (K=2) for each test is listed below. Our measurement data meets or exceeds the measurement uncertainty requirements of the applicable specification; therefore, the test data can be compared directly to the specification limit to determine compliance. The calculations for estimating measurement uncertainty are based upon ETSI TR 100 028 (or CISPR 16-4-1 as applicable), and are available upon request. The following table represents the Measurement Uncertainty (MU) budgets for each of the tests that may be contained in this report. Test + MU - MU Frequency Accuracy (Hz) 0.12 -0.01 Amplitude Accuracy (dB) 0.49 -0.49 Conducted Power (dB) 0.41 -0.41 Radiated Power via Substitution (dB) 0.69 -0.68 Temperature (degrees C) 0.81 -0.81 Humidity (% RH) 2.89 -2.89 Field Strength (dB) 3.80 -3.80 AC Powerline Conducted Emissions (dB) 2.94 -2.94 REV 2013.06.28 FACILITIES Oregon Labs EV01-12 22975 NW Evergreen Pkwy Hillsboro, OR 97124 (503) 844-4066 California Labs OC01-13 41 Tesla Irvine, CA 92618 (949) 861-8918 New York Labs NY01-04 4939 Jordan Rd. Elbridge, NY 13060 (315) 685-0796 Minnesota Labs MN01-08 9349 W Broadway Ave. Brooklyn Park, MN 55445 (763) 425-2281 Washington Labs NC01-05,SU02,SU07 19201 120 th Ave. NE Bothell, WA 98011 (425) 984-6600 VCCI A-0108 A-0029 A-0109 A-0110 Industry Canada 2834D-1, 2834D-2 2834B-1, 2834B-2, 2834B-3 2834E-1 2834F-1 NVLAP NVLAP Lab Code: 200630-0 NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200629-0 WTD 12.5.23 PRODUCT DESCRIPTION Client and Equipment Under Test (EUT) Information Company Name: Dana Innovations Address: 212 Avenida Fabricante City, State, Zip: San Clemente, CA 92672 Test Requested By: Lucian Scripca Model: AM.2 Clear Connect Sleeve Top First Date of Test: July 01, 2014 Last Date of Test: July 01, 2014 Receipt Date of Samples: July 01, 2014 Equipment Design Stage: Production Equipment Condition: No Damage Information Provided by the Party Requesting the Test Functional Description …

Text truncated - open the document above for the full version.

DUTY CYCLE XMit 2014.02.07 NORTHWEST DUTY CYCLE EMC DCB & OBB (1).JPG DCB & OBB (2).JPG DUTY CYCLE OCCUPIED BANDWIDTH XMit 2014.02.07 NORTHWEST OCCUPIED BANDWID EMC DCB & OBB (1).JPG DCB & OBB (2).JPG OCCUPIED BANDWIDTH photo SEB Horiz (1).JPG SEB Horiz (2).JPG FIELD STRENGTH OF FUNDAMENTAL PSA-ESCI 2014.06.19 photo SEB Horiz (3).JPG SEB on Side (1).JPG FIELD STRENGTH OF FUNDAMENTAL PSA-ESCI 2014.06.19 photo SEB on Side (2).JPG SEB on Side (3).JPG FIELD STRENGTH OF FUNDAMENTAL PSA-ESCI 2014.06.19 photo SEB Vert (1).JPG SEB Vert (2).JPG FIELD STRENGTH OF FUNDAMENTAL PSA-ESCI 2014.06.19 photo SEB Vert (3).JPG FIELD STRENGTH OF FUNDAMENTAL PSA-ESCI 2014.06.19 photo SEB Horiz (1).JPG SEB Horiz (2).JPG SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.06.19 photo SEB Horiz (3).JPG SEB on Side (1).JPG SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.06.19 photo SEB on Side (2).JPG SEB on Side (3).JPG SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.06.19 photo SEB Vert (1).JPG SEB Vert (2).JPG SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.06.19 photo SEB Vert (3).JPG SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.06.19