2ACU8INT134AN26 LARGE HOLOCRON

FCC LABEL FCC ID & FCC STATEMENT SIZE AN26 LARGE HOLOCRON Located at bottom of product Located at bottom of product FCC ID FCC STATEMENT LENGTH (MM)HEIGHT(MM) 17.41.6 6.966 LOCATION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC & FCCIDSTATEMENT FCC ID: 2ACU8INT134

INTERTEK TESTING SERVICES RF Exposure The equipment under test (EUT) is an AN26 LARGE HOLOCRON RFID function. The EUT can be powered by DC 3.7V (1 x 3.7V rechargeable battery) and DC 5.0V from USB Port. For more detail information pls. refer to the user manual. Antenna Type: Integral antenna Modulation Type: ASK According to the KDB 447498 D04 V01: Frequency (MHz) Reading result (dBμV/m Output Power (dBm) Output Power (mW) Measurement Result(mW) Limit (mW) 0.118 65.5 -29.7 0.001 0.001 1 1-mW Test Exemption: Since the source-based time-averaging conducted output power is well below 1-mW Test Exemption, per KDB 447498 D04 V01 and §1.1307 (b) (3) (i) (A), the EUT is considered to comply with SAR requirement without testing and no evaluation is required. FCC ID: 2ACU8INT134

International Toy, Inc. TEST REPORT SCOPE OF WORK FCC TESTING– 1000110663 REPORT NUMBER SZHH02123736-003 ISSUE DATE [REVISED DATE] Dec 24, 2025 [--------------------] PAGES 19 DOCUMENT CONTROL NUMBER FCC ID 215_C © 2017 INTERTEK Intertek Report No.: SZHH02123736-003 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Service Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, People’s Republic of China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 19 FCC ID 215_C Test Report 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com International Toy, Inc. Application For Certification FCC ID: 2ACU8INT134 AN26 LARGE HOLOCRON Model: 1000110663 118KHz Transceiver Report No.: SZHH02123736-003 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-24] Prepared and Checked by: Approved by: Sign on file Terry Tang Assistant Supervisor Johnny Wang Project Engineer Date: Dec 24, 2025 Intertek Report No.: SZHH02123736-003 Version: 01-November-2017 Page: 2 of 19 FCC ID 215_C Test Report MEASUREMENT/TECHNICAL REPORT This report concerns (check one:) Original Grant X Class II Change Equipment Type: DCD - Part 15 Low Power Transmitter Below 1705 kHz Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-24 Edition] provision. Report prepared by: Terry Tang Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, P.R. China Tel: (86 755) 8614 0651 Fax: (86 755) 8601 6751 Intertek Report No.: SZHH02123736-003 Version: 01-November-2017 Page: 3 of 19 FCC ID 215_C Test Report Table of Contents 1.0 Summary of Test Result ............................................................................................ 4 2.0 General Description ................................................................................................. 5 2.1 Product Description ............................................................................................... 5 2.2 Related Submittal(s) Grants .................................................................................... 5 2.3 Test Methodology ................................................................................................. 5 2.4 Test Facility .......................................................................................................... 5 3.0 System Test Configuration ........................................................................................ 6 3.1 Justification .......................................................................................................... 6 3.2 EUT Exercising Software ......................................................................................... 6 3.3 Special Accessories ................................................................................................ 6 3.4 Equipment Modification ......................................................................................... 6 3.5 Measurement Uncertainty ..................................................................................... 6 3.6 Support Equipment List and Description ................................................................... 7 4.0 Emission Results ...................................................................................................... 8 4.1 Radiated Test Results ............................................................................................. 8 4.1.1 Field Strength Calculation .................................................................................... 8 4.1.2 Radiated Emission Configuration Photograph ......................................................... 9 4.1.3 Radiated Emissions ............................................................................................. 9 4.2 Conducted Emission at Mains Termina ................................................................... 13 4.2.1 Conducted Emissions Configuration Photograph ................................................... 13 4.2.2 Conducted Emissions........................................................................................ 13 5.0 Equipment Photographs ......................................................................................... 16 6.0 Product Labelling ................................................................................................... 16 7.0 Technical Specifications ....................................................…

Text truncated - open the document above for the full version.