2ACWM-SONICLASSSonitrol iClass Keypad

Certification Exhibit FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS FCC Rule Part: 15.209 IC Radio Standards Specification: RSS-210 ACS Project: 14-2086 Manufacturer: Stanley Convergent Security Solutions, Inc. Model: SONIP ICLASS KP User Manual 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 Installation Guide Standard and iCLASS Enhanced Keypad 19810009 Rev D September 2014 Stanley Convergent Security Solutions, Suite 500, 1707 Orlando Central Parkway, Orlando, FL 32809, U.S.A Tel +1 877 SONITROL (+1 877 766-4876) Web www.Sonitrol.com Standard and iCLASS Enhanced Keypad 19810009 Rev D Copyrights and Trademarks Copyright Information Copyright © 1998-2014 by Stanley Security Solutions All rights reserved. No part of this work covered by the copyright hereon may be reproduced or used in any form or by any means graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems without permission of Stanley Security Solutions. Trademarks Sonitrol is a Registered Trademark of Stanley Security Solutions. All other products are trademarks of their respective manufacturers. All registered and unregistered trademarks are the sole property of their respective companies. Related Publications The table below contains related Sonitrol documents with corresponding part numbers. Description Part Number iBase Installation Guide 19810005 FlexIP Installation Guide 19810065 FlexiBase Installation Guide 19810022 Panel Programming Guide 19810015 Keypad User Guide 19810016 History of Changes: Date Summary of Changes 8/27/14 Updated FCC IC information, and iCLASS mounting instructions Page ii 19810009 Rev D Standard and iCLASS Enhanced Keypad Table of Contents 1. Introduction.................................................................................................................................... 1 1.1 Copyright and Trademark .......................................................................................................... 1 1.2 Reference Material .................................................................................................................... 1 1.3 Overview .................................................................................................................................... 1 2. Hardware ........................................................................................................................................ 2 2.1 Opening Case ........................................................................................................................... 2 2.2 Wall Mounting ............................................................................................................................ 2 2.3 Single Gang Box Mounting ........................................................................................................ 3 2.4 Terminal Block Mounting ........................................................................................................... 4 2.5 Keypad Wiring ........................................................................................................................... 4 2.6 Cabling Considerations ............................................................................................................. 5 2.7 Closing Case ............................................................................................................................. 5 2.8 Specifications ............................................................................................................................ 5 3. FCC ................................................................................................................................................. 6 4. SONITROL CORPORATION HARDWARE LIMITED WARRANTY STATEMENT ...................... 8 Page iii Standard and iCLASS Enhanced Keypad 19810009 Rev D This page is intentionally left blank. Page iv 19810009 Rev D Standard and iCLASS Enhanced Keypad 1. Introduction 1.1 Copyright and Trademark Copyright 2008 by Sonitrol Corporation. All rights reserved. No part of this document may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of Sonitrol Corporation. 1.2 Reference Material This manual covers the information needed to install the SonIP Standard and iCLASS Enhanced Keypads. See 19810016 SonIP Keypad User Guide for user options and service procedures. See 19810005 SonIP iBase Installation Guide or 19810022 FlexiBase Installation Guide for complete planning and additional installation procedures. See 19810015 SonIP iBase/FlexiBase Programming Guide for options and programming procedures. 1.3 Overview The Standard and Enhanced Keypads are compatible with the SonIP iBase and FlexiBase Systems. The two keypads have the same system and programming functionality. The iCLASS Enhanced Keypad has an integrated HID iCLASS reader that can be configured as an Arm/ Disarm reader or ingress access control. The Standard/Enhanced Keypad is the primary user interface for navigating system programming, performing simple data entry, and controlling the SonIP iBase and FlexiBase System alarms and access control functions. A Liquid Crystal Display (LCD), with scrolling text, is provided for displaying data entry, system status messages, programming menus, and function options. These can be accessed and selected through the alphanumeric digital keypad. The LCD display is backlit and the keypad is low level illuminated, or in case of poor lighting conditions, may be programmed for high level illumination. The LCD backlight remains illuminated at the normal brightness at all times except when a button has been pressed The keypad high level illumination remains active for 15 seconds after the last key press. The keypad can be mounted up to 100m (328 ft.) from the control panel, nearest module, or power hub. Note: If a keypad ne…

Text truncated - open the document above for the full version.

For licensing information, visit www.stanleycss.com/licenses.html. Christopher Harris Security Compliance Officer STANLEY Convergent Security Solutions 1707 Orlando Central Parkway, Suite 500, Orlando, FL 32809 T (407) 206 7415 F (866) 716 9006 [email protected] August 21, 2014 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: I hereby appoint Sam Wismer at Advanced Compliance Solutions, Inc. to act as our agent in the preparation of an application for equipment authorization of FCC ID: 2ACWM-SONICLASS to the FCC Rules and Regulations. I certify that all exhibits contained within this filing properly describe the device or system for which authorization is sought. I further certify that appropriate arrangements have been made to assure that production units of this equipment bearing the name and FCC IDENTIFIER listed in this application will continue to comply with the Commission's requirements. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Sincerely, Name: Christopher Harris Title: Security Compliance Officer

November 20, 2014 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: Stanley Convergent Security Solutions, Inc. respectfully requests confidentiality of certain materials provided with the submission of the SONIP ICLASS KP under FCC ID: 2ACWM- SONICLASS in accordance with FCC Regulations 47 CFR 0.457(d) and 47 CFR 0.459. The confidentiality request applies to the following exhibits: 14-2086 – Schematics.pdf 14-2086 – Block Diagram.pdf 14-2086 – Theory of Operation.pdf The SONIP ICLASS KP has been developed at considerable effort and expense by Stanley Convergent Security Solutions, Inc.. These items are considered as Trade Secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the company’s business advantage. I appreciate your assistance in this matter. Sincerely, Sam Wismer Vice President, Technology Agent Advanced Compliance Solutions – 5015 B.U. Bowman Drive, Buford, GA 30518 Phone: (770) 831-8048 Fax: (770) 831-8598

5015 B. U. Bowman Dr. Buford, GA 30518 October 9, 2014 ACS TCB 5015 B.U. Bowman Drive Buford, GA 30518 Re: FCC ID: 2ACWM-SONICLASS To Whom It May Concern: The following application is submitted on behalf of our client, Stanley Convergent Security Solutions, Inc. , for evaluation of their model SONIP ICLASS KP for certification under FCC Part 15.209. The SONIP ICLASS KP is keypad which includes a 13.56 MHz HID RFID reader. The Keypad is the main display, programming, and user interface to the Sonitrol control panels. The FCC ID: 2ACWM-SONICLASS was tested in full to the requirements of the aforementioned rules and was found to be in compliance. Sincerely, Sam Wismer Vice President, Technology Advanced Compliance Solutions, Inc.

Certification Exhibit FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS FCC Rule Part: 15.209 IC Radio Standards Specification: RSS-210 ACS Project: 14-2086 Manufacturer: Stanley Convergent Security Solutions, Inc. Model: SONIP ICLASS KP External Photos 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 1: Front View ACS Project: 14-2086 Advanced Compliance Solutions Page 2 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 2: Rear View ACS Project: 14-2086 Advanced Compliance Solutions Page 3 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 3: Side View ACS Project: 14-2086 Advanced Compliance Solutions Page 4 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 4: Side View ACS Project: 14-2086 Advanced Compliance Solutions Page 5

Certification Exhibit FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS FCC Rule Part: 15.209 IC Radio Standards Specification: RSS-210 ACS Project: 14-2086 Manufacturer: Stanley Convergent Security Solutions, Inc. Model: SONIP ICLASS KP Label Information 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 TITLE DRAWING NO. REV DIMENSIONS ARE IN INCHES TOLERANCES: ANGLES = +/- .5 DECIMAL = .00 = +/- .010 .000 = +/- .005 DO NOT SCALE DRAWING SIZE BYREV DATEDESCRIPTION ECO #APR THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO SONITROL. IT IS INTENDED FOR DISTRIBUTION ONLY TO PERSONS OR ORGANIZATIONS HAVING A LEGITIMATE NEED FOR THIS INFORMATION. RELEASE LEVEL SONITROL, CORPORATION 1707 ORLANDO CENTRAL PKWY SUITE 500 ORLANDO, FLORIDA 32809 -N/ARELEASED TO PRODUCTIONTWGKAW LABEL, FCC IC SONIP ICLASS KP 19810074 RELEASE SCALE3.000 SHEET1 OF 1 APPROVED:DATE DRAWN BY GRYNOWICKI T. DATE ENGINEER GRAPHIC REPRESENTATION ONLY NOTES: 1. MATERIAL: 125 MICRON POLYCARB 8B3G VELVET/MATT - LEXAN 2. COLORS: BLACK DETAILS ON A WHITE BACKGROUND 3. ADHESIVE: 3M 468. HI-PERFORMANCE 4. SUPPLIED AS: SUB-SURFACE PRINTED, UL APPROVED TO PGDQ2 6. PICTORIAL SHOWN FOR REFERENCE ONLY. ACCEPTANCE OF THE LABEL BASED ON MANUFACTURING'S PRINTED LABEL. WILLIAMS K. DATE AHLQVIST A. 26AUG14 A 5. MARKINGS ON LABEL MUST BE PERMANENT. 26AUG14 26AUG14 26AUG14 MODEL: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesidered operation. 7. PICTORIAL ONLY USED TO DEMONSTRATE LABEL PLACEMENT ON THE INSIDE RIGHT EDGE OF THE SONIP ICLASSKP BACKPLATE

Certification Exhibit FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS FCC Rule Part: 15.209 IC Radio Standards Specification: RSS-210 ACS Project: 14-2086 Manufacturer: Stanley Convergent Security Solutions, Inc. Model: SONIP ICLASS KP Internal Photos 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 1: PCB Front View ACS Project: 14-2086 Advanced Compliance Solutions Page 2 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 2: PCB Back View ACS Project: 14-2086 Advanced Compliance Solutions Page 3

Certification Test Report FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS FCC Rule Part: 15.209 IC Radio Standards Specification: RSS-210 ACS Report Number: 14-2086.W06.1B Applicant: STANLEY Convergent Security Solutions, Inc. Model: SONIP ICLASS KP Test Begin Date: August 7, 2014 Test End Date: August 28, 2014 Report Issue Date: December 9, 2014 FOR THE SCOPE OF ACCREDITATION UNDER CERTIFICATE NUMBER AT-1533 This report must not be used by the client to claim product certification, approval, or endorsement by ACLASS, ANSI, or any agency of the Federal Government. Reviewed by: Thierry Jean-Charles EMC Engineer Advanced Compliance Solutions, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 18 pages 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 TABLE OF CONTENTS 1 GENERAL ...................................................................................................... 3 1.1 Purpose .............................................................................................................................................. 3 1.2 Product Description .......................................................................................................................... 3 1.3 Test Methodology and Considerations ........................................................................................... 3 2 TEST FACILITIES .......................................................................................... 4 2.1 Location ............................................................................................................................................. 4 2.2 Laboratory Accreditations/Recognitions/Certifications ............................................................... 4 2.3 Radiated & Conducted Emissions Test Site Description .............................................................. 5 3 APPLICABLE STANDARD REFERENCES................................................... 6 4 LIST OF TEST EQUIPMENT .......................................................................... 7 5 SUPPORT EQUIPMENT ................................................................................ 8 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM ............................ 10 7 SUMMARY OF TESTS ................................................................................. 11 7.1 Antenna Requirement – FCC: Section 15.203 ..............................................................................11 7.2 20dB / 99% Bandwidth: FCC: Section 15.215 / IC RSS-Gen 6.6 ................................................11 7.3 Radiated Spurious Emissions – FCC: Section 15.209 / IC: RSS-210 2.5 ....................................13 7.4 Power Line Conducted Emissions – FCC: Section 15.207, RSS-Gen 8.8 ....................................16 8 CONCLUSION .............................................................................................. 17 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS 1 GENERAL 1.1 Purpose The purpose of this report is to demonstrate compliance with Part 15 Subpart C of the FCC’s Code of Federal Regulations and Industry Canada’s Radio Standards Specification RSS-210. 1.2 Product Description The SONIP ICLASS KP is compatible with the SonIP iBase and FlexiBase Systems. The product has an integrated HID iCLASS reader that can be configured as an Arm/ Disarm reader or ingress access control. The keypad is a user interface for navigating, system programming, performing simple data entry, and controlling the SonIP iBase and FlexiBase System alarms and access control functions. The EUT includes a Liquid Crystal Display (LCD), with scrolling text, and an alphanumeric digital keypad. Technical Details Frequency of Operation: 13.56 MHz Number of Channels: 1 Modulation: No modulation Antenna: Magnetic Loop Antenna Input Voltage: 5 VDC (through FlexiP unit) Manufacturer Information: STANLEY Convergent Security Solutions 1707 Orlando Central Parkway, Suite 500, Orlando, FL 32809 Model Number: SONIP ICLASS KP Test Sample Serial Number(s): 6443484, 6401325 (Power line conducted emissions at 13.56 MHz) Test Sample Condition: The test samples were provided in good condition with no physical damage. 1.3 Test Methodology and Considerations The EUT was evaluated for radiated and power line conducted emissions. The EUT was assessed in the orientation of typical installation. The EUT was powered and connected to FlexiP system through an EMT conduit per the manufacturer installation guidelines. For the power line conducted evaluation, the emissions at the 13.56 MHz fundamental frequency were measured with on a sample with a 50 Ohm load at the RF port. The radiated and remaining power line emission measurements were performed on an unmodified sample with the antenna connected. ACS Report: 14-2086.W06.1B Advanced Compliance Solutions Page 3 of 18 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS 2 TEST FACILITIES 2.1 Location The radiated and conducted emissions test sites are located at the following address: Advanced Compliance Solutions, Inc. 3998 FAU Blvd, Suite 310 Boca Raton, Florida 33431 Phone: (561) 961-5585 Fax: (561) 961-5587 www.acstestlab.com FCC Test Firm Registration #: 475089 Industry Canada Lab Code: 4175C 2.2 Laboratory Accreditations/Recognitions/Certifications ACS is accredited to ISO/IEC 17025 by ANSI-ASQ National Accreditation Board under their ACLASS program and has been issued certificate number AT-1533 in recognition of this accreditation. Unless otherwise specified, all test methods described within this report are covered under the ISO/IEC 17025 scope of accreditation. ACS Report: 14-2086.W06.1B Advanced Compliance Solutio…

Text truncated - open the document above for the full version.

Certification Exhibit FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS FCC Rule Part: 15.209 IC Radio Standards Specification: RSS-210 ACS Project: 14-2086 Manufacturer: Stanley Convergent Security Solutions, Inc. Model: SONIP ICLASS KP Test Setup Photos 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 1: Radiated Emissions – Front View ACS Project: 14-2086 Advanced Compliance Solutions Page 2 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 2: Radiated Emissions – Back View - below 30 MHz ACS Project: 14-2086 Advanced Compliance Solutions Page 3 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 3: Radiated Emissions – Back View - 30 MHz – 200 MHz ACS Project: 14-2086 Advanced Compliance Solutions Page 4 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 4: Radiated Emissions – Back View - 200 MHz – 1 GHz ACS Project: 14-2086 Advanced Compliance Solutions Page 5 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 5: Power Line Conducted Emissions – Front View ACS Project: 14-2086 Advanced Compliance Solutions Page 6 Model: SONIP ICLASS KP FCC ID: 2ACWM-SONICLASS IC: 7309A-SONICLASS Figure 6: Power Line Conducted Emissions – Side View ACS Project: 14-2086 Advanced Compliance Solutions Page 7