2ACY4WLC-102Wireless camera

The distance between user and products should be no less than 20cm

AST Technology (shenzhen) Co. Ltd Room 1304,West Building Of NanShan Software Park, NanShan District, ShenZhen, China DATE :2014-8-25 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Hank.Yan of Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with AST Technology (shenzhen) Co. Ltd and Room 1304,West Building Of NanShan Software Park, NanShan District, ShenZhen, China Dated this / Day of 8/25/2014 / Agency agreement expiration date: 8/25/2015 By: Jeff Wang Signature Printed Title: Manager On behalf of : AST Technology (shenzhen) Co. Ltd Telephone: +86-755-61618339

WLC 102 0 9GHZ- . DC 12VNTSC Camera Label About: . * . 24 3 10 3mm FCC ID: 2ACY4WLC-102 -

Label Location Label location

FCC ID:2ACY4WLC-102 According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances  50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[f(GHz)]  3.0 for 1-g SAR and  7.5 for 10-g extremity SAR, where --f(GHz) is the RF channel transmit frequency in GHz --Power and distance are rounded to the nearest mW and mm before calculation --The result is rounded to one decimal place for comparison EIRP = pt x gt = (EXd) 2 /30 Where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unit less), E = electric field strength in V/m, ---10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m) ---3m So pt = (Exd) 2 / 30 x gt Field strength = 70.88 dBuV/m @3m Ant gain =1.50dBi, so Ant numeric gain=1.41 So pt={ [10 (70.88 /20) /10 6 x 3] 2 / 30 x 1.41 } x 1000 mW = 0.003mW So (0.003mW /5mm) x 2.474 = 0.001<3 Then SAR evaluation is not required 0.905

Global United Technology Services Co., Ltd. Report No.: GTSE14070128801 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS or testing done by GTS in connection with, distribution or use of the product described in this report must be approved by GTS in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC REPORT Applicant: AST Technology (shenzhen) Co. Ltd Address of Applicant: Room 1304, West Building Of NanShan Software Park, NanShan District, ShenZhen City Equipment Under Test (EUT) Product Name: Wireless camera Model No.: WLC-102 Trade Mark: AST FCC ID: 2ACY4WLC-102 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2013 Date of sample receipt: July 25, 2014 Date of Test: July 25-August 05, 2014 Date of report issued: August 13, 2014 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE14070128801 Global United Technology Services Co., Ltd. Project No.: GTSE14070128801 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 35 2 Version Version No. Date Description 00 August 13, 2014 Original Prepared By: Date: August 13, 2014 Project Engineer Check By: Date: August 13, 2014 Reviewer Report No.: GTSE14070128801 Global United Technology Services Co., Ltd. Project No.: GTSE14070128801 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 35 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3CONTENTS .............................................................................................................................................. 3 4TEST SUMMARY ..................................................................................................................................... 4 5GENERAL INFORMATION ...................................................................................................................... 5 5.1CLIENT INFORMATION ......................................................................................................................... 5 5.2GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3TEST MODE ........................................................................................................................................ 7 5.4DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.5TEST FACILITY ................................................................................................................................... 7 5.6TEST LOCATION ................................................................................................................................. 7 5.7OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 7 6TEST INSTRUMENTS LIST ..................................................................................................................... 8 7TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1ANTENNA REQUIREMENT: ................................................................................................................... 9 7.2CONDUCTED EMISSIONS ................................................................................................................... 10 7.3RADIATED EMISSION METHOD ........................................................................................................... 13 7.3.1Field Strength of The Fundamental Signal ................................................................................ 15 7.3.2Spurious emissions .................................................................................................................... 16 7.3.3Bandedge emissions .................................................................................................................. 21 7.420DB OCCUPY BANDWIDTH .............................................................................................................. 22 8TEST SETUP PHOTO ............................................................................................................................ 24 9EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 26 Report No.: GTSE14070128801 Global United Technology Service…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission