2ACY7-EMW770BLUETOOTH SMART Switch

Bluetooth 4.0 Smart Switch Model: EMW770 USER MANUAL INTRODUCTION Thank you for purchasing our product Bluetooth 4.0 Smart Switch EMW770. It supports any iOS devices with Bluetooth 4.0 equipped and Android device with OS 4.3 or above. We strongly recommend to read this User Manual before you operate the product. EMW770 is a Bluetooth 4.0 Smart Switch which can seamlessly control and monitor your energy usage of the lighting xtures and electric appliances connected. With the App provided, user can monitor the energy usage and control at desired condition. User can program the switch to turn on/ o at desired time schedule. 13 4567 ENGLISH ABOUT CONTROL SMART SWITCH Ratings : 120 VAC, max 15A 1800W Wireless Standard : Bluetooth 4.0 Frequency Range : 2402 – 2480 MHz Operation Range : up to 30 meters SPECIFICATIONS COUNTDOWN TIMER OVERLOAD WARNING GETTING STARTED BOX CONTENTS Your Control Smart Switch will contain: 1) Smart Switch main unit 2) Face plate with screws 3) Wire nuts (3) 4) Mount Screws (2) 5) This user manual 6) Quick start guide 2 1 2 LED INDICATOR LED Colour Status No LED on Output OFF and idle Blue LED blink Countdown timer running Blue LED on Output ON and idle Red LED blink Overload warning Red LED on Pairing in progress REMOTE CONTROL User can turn the output of smart socket to ON/ OFF with the App. To obtain better performance, user must ensure that the smart socket is located within the coverage of Bluetooth signal with your smartphone or tablet. The receiving distance will be aected by obstacles and building materials. It is recommended to place the smart socket away from TV set, computer, wireless router or any radio frequency apparatus. To save energy cost, user need an energy monitor to tell you how much energy is consuming by your electrical appliance. This smart socket has built-in non-volatile memory which can record the energy consumption of the electrical appliances. With the tari rate setting, the energy cost can be calculated automatically. User can analysis the energy consumption of their appliance with graphical view. This smart socket can set an overload warning with the App. When the connected appliance exceed the overload settings (Wattage or Current), the device will give an overload alert by ashing Red LED or beep sound or cut the power to the appliance. The alert method can be set by the App via smartphone or tablet. SCHEDULE TIMER This smart socket can be programmed with timer by the App which can turn the appliance ON/ O at desired time. The benets of setting the schedule timer with the App is more convenient and easier with the intuitive user interface. 11) Do not subject the equipment to direct sunlight or extreme temperatures, humidity or dampness. 12) Do not subject the equipment to shocks or strong vibrations. 13) Do not operate the equipment near strong magnetic elds (motors , transformers etc.) 14) Do not store the smart socket in a place of explosive, inammable substances. 15) Do not modify the equipment in any way 16) The guarantee become invalid in the event of damage resulting from non-observance or improper use of the operation manual. SAFETY INSTRUCTIONS To ensure safe operation of the equipment and eliminate the danger of serious injury due to short-circuits, the following safety precautions must be observed. 1) Do not connect after each other 2) Use indoor only. 3) Keep children and pets away. 4) Inspect periodically. 5) The unauthorized rebuilding and/or modifying of the device is not permitted. 6) If you are not sure about the operation, safety or the connection of the device, contact an expert. 7) Opening the equipment, service and repair work must only be carried out by a trained person who is familiar with the relevant regulations. 8) To avoid any hazard or misuse, please use this product only as described in user manual. 9) Do not operate this product in wet or damp conditions, to avoid electric shock. 10) Comply with the warning labels and other information on the equipment. User can set a countdown timer to turn the appliance ON/ OFF with the App. When the countdown timer elapsed, the output of the smart socket will be turned OFF. This smart socket has equipped with LED indicator to indicate the device status (see below). 1) White - Neutral 2) Green - Earth 3) Red - Line Out 4) Black - Line In MANUAL ON/ OFF User can turn the output of smart socket to ON/ OFF manually by pressing the On/ O button on the device. The status of the output will be shown in the App on your smartphone or tablet automatically. Installation: 1. Turn power OFF at Circuit Breaker. 2. Remove the cover plate and replace the existing wall switch with Smart Switch as above wiring connection. 3. Attach the switch cover plate. 4. Turn power ON at Circuit Breaker. 5. To conrm the unit is working. Press the Manual On/ O button and the LED indicator (Blue colour) will blink with the key press. Download and install the App “Control Smart” from App Store or Play Store Follow the instructions of the App to pair the device with your smartphone or tablet. iPhone and iPad are the registered trademarks of Apple Inc. ENERGY MONITORING Manual On/ O and Pairing LED Indicator 3 White Wiring Diagram: Green Red Black Any unused smart socket and batteries must be disposed of according to the local EPA regulations at the end of their service life. Distributed by: Eco-logic Products Limited Unit 2113, 21/F Landmark North, 39 Lung Sum Avenue, Sheung Shui, N.T., Hong Kong Made in China Disconnection means: Type 1B Pollution degree: 2 Rated impluse voltage: 1500V Automatic action: 20,000 cycles 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modications to this unit not expressly approved by the party responsible for compliance …

Text truncated - open the document above for the full version.

Block Diagram Model: EMW770 Product: Bluetooth Smart Switch Bluetooth Chip Controller Energy Meter IC Relay Control Output On/ Off AC Mains Shunt Load Antenna (2402-2480MHz) Keys/ buttons Backup battery SMPS Memory 120Vac, 60Hz, 15A 1800W max 120Vac, 60Hz, 15A 1800W max #7 Regulator U4 #6 U2 #2 U5 K6 MOD1 SPI #1 I2C U3 #4 LED LED3, LED4 #9 Buzzer Buz #10 #3 S1 Batt 1 #8 RESET WATCHDOG TIMER IRQ CTRL FLASH CTRL DEBUG INTERFACE CLOCK MUX and CALIBRATION DMA 8051 CPU CORE 32-MHz CRYSTAL OSC OP-AMP 32.768-kHz CRYSTAL OSC HIGH- SPEED RC-OSC POWER MANAGEMENT CONTROLLER USART 0 USB USART 1 TIMER 1 (16-Bit) TIMER 3 (8-Bit) TIMER 4 (8-Bit) TIMER 2 (BLE LL TIMER) FLASH FIFOCTRL 1 KB SRAM ON-CHIP VOLTAGE REGULATOR POWER-ON RESET BROWN OUT VDD (2 V–3.6 V) DCOUPL RESET_N XOSC_Q2 XOSC_Q1 P2_4 P1_7 P0_7 P2_3 P1_6 P0_6 P2_2 P1_5 P0_5 P1_2 P0_2 P2_1 P1_4 P0_4 P1_1 P0_1 P2_0 P1_3 P0_3 P1_0 P0_0 MODULATOR DEMODULATOR RECEIVE TRANSMIT FREQUENCY SYNTHESIZER SYNTH RF_P RF_N B0301-05 RADIO REGISTERS SFR Bus SFR Bus DS ADC AUDIO/DC AES ENCRYPTION AND DECRYPTION MEMORY ARBITRATOR FLASH UNIFIED SFR IRAM XRAM PDATA SLEEP TIMER 32-kHz RC-OSC I/O CONTROLLER DIGITAL ANALOG MIXED ANALOG COMPARATOR USB_N USB_P Radio Arbiter Link Layer Engine CC2540F128, CC2540F256 www.ti.comSWRS084F– OCTOBER2010– REVISEDJUNE2013 Copyright© 2010–2013,TexasInstrumentsIncorporatedSubmitDocumentationFeedback3 ProductFolderLinks:CC2540F128CC2540F256

ECO-LOGIC PRODUCTS LIMITED UNIT 2113-2115, 21/F LANDMARK NORTH, 39 LUNG SUM AVENUE, SHEUNG SHUI, N.T., HONG KONG Letter of Agency "I, an officer of ECO-LOGIC PRODUCTS LIMITED do hereby authorize Intertek Testing Services (Mr. Terry Chan / Koo Wai Ip / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 8 day September of 2014 By: __________________________ Signature Printed Name: TIM FONG Title: PRODUCT MANAGER

INTERTEK TESTING SERVICES External Photos FCC ID: 2ACY7-EMW770 IC:12321A-EMW770 external photos - 1 of 1

Input/ Output Voltage: 120 V/AC, 60 Hz Max Loading: 15 A / 1800 W FCC ID: 2ACY7-EMW770 IC: 12321A-EMW770 Neutral (White) Earth (Green) Line-Out (Red) Line-In (Black) Made in China Model No.: EMW770 Smart Switch EMW770 Rating Label Size: 42 x 36 mm Distributed by: Eco-logic Products Ltd. MMYY 5000233 CONFORMS TO UL STD. 60730-1 & 60730-2-7 CERTIFIED TO CSA E60730-1 & CSA IEC E730-2-7 DATE CODE: MM = MONTH YY = YEAR 0315 = MARCH 2015

INTERTEK TESTING SERVICES Internal photos FCC ID: 2ACY7-EMW770 IC: 12321A-EMW770 internal photos - 1 of 5 INTERTEK TESTING SERVICES Internal photos FCC ID: 2ACY7-EMW770 IC: 12321A-EMW770 internal photos - 2 of 5 INTERTEK TESTING SERVICES Internal photos FCC ID: 2ACY7-EMW770 IC: 12321A-EMW770 internal photos - 3 of 5 INTERTEK TESTING SERVICES Internal photos FCC ID: 2ACY7-EMW770 IC: 12321A-EMW770 internal photos - 4 of 5 INTERTEK TESTING SERVICES Internal photos FCC ID: 2ACY7-EMW770 IC: 12321A-EMW770 internal photos - 5 of 5

Technical Description The Equipment Under Test (EUT) is a Bluetooth Smart Switch. The EUT is using direct sequence spread spectrum for Bluetooth module. The Bluetooth can support Bluetooth 4.0 BLE only. The Bluetooth portion operates in frequency range from 2402MHz to 2480MHz. The EUT is powered by AC Mains (120VAC 15A 1800W max). Module: Modulation Type: GFSK Antenna Type: Integral, Internal Frequency Range: 2402MHz-2480MHz , 2MHz channel spacing, 40 channels. Nominal field strength is 9 1.0 dB μV/m @ 3m Production Tolerance of field strength is +/- 3dB Antenna gain is 0dBi The functions of main ICs are mentioned below. Block #1 - MOD1 Bluetooth LE transceiver and microcontroller module Bluetooth stack is running in the MCU, Input key pad user input for on/off and pairing control #3 data is stored in non-volatile #4 LED #9 status output for user Buzzer #10 output as warning Block #2 - Energy Metering Energy metering chip (U5), convert current in voltage for BLE (MOD1). X1 (4.096MHz) acts as a crystal for clock for energy meter. Block #3 - Keypad User input - on, off, and pairing control Block #4 - Memory U3, user data store Block #6 - Relay Relay (K6) on/off the load Block #7 - power supply to system Switching Mode Power Supply (U4) Block #8 - Battery Battery (Batt1) keeps MCU (MOD1) the real time clock running Block #9 - LED on, off, pairing and overload indication Block #10 - Buzzer Overload indication Detail of operation Bluetooth module (MOD1) embedded with MCU and Bluetooth hardware & firmware. It contains two crystals Y1(32.768KHz) and Y2(32MHz) and integrated 2.4GHz PCB antenna. MCU takes keypad or BLE commands entered by user and send energy meter read (#2) via Bluetooth back to smartphone. Power consumption data and date is stored in non-volatile memory #4. If device overloaded, buzzer #10 will sound up. Back up battery (Batt1) is used to keep real time clock of Bluetooth module running even if the device is un-plugged from socket. Power supply #7 step down 120V to +5 Volt rail for the system. There is another regulator U2 which regulates the 5V to 3.3V for Bluetooth module (MOD1), memory (U3) and metering chip (U5). Relay (K6) is in series with the shunt and load for on, off controlled by MOD1. CC2540F128, CC2540F256 www.ti.comSWRS084F – OCTOBER 2010 – REVISED JUNE 2013 2.4-GHzBluetooth ® low energy System-on-Chip Check for Samples:CC2540F128, CC2540F256 1 FEATURESA •TPS62730Compatible 23456 • True Single-Chip BLE Solution: CC2540 Can Low Power in Active Mode Run Both Application and BLE Protocol Stack, Includes Peripherals to Interface With Wide – RX Down to 15.8 mA (3 V Supply) Range of Sensors, Etc. – TX (-6 dBm): 18.6 mA (3 V Supply) •6-mm × 6-mm Package A •RF •Microcontroller –Bluetoothlow energy technology – High-Performance and Low-Power 8051 Compatible Microcontroller Core – Excellent Link Budget (up to 97 dB), – In-System-Programmable Flash, 128 KB or Enabling Long-Range Applications Without 256 KB External Front End – 8-KB SRAM – Accurate Digital Received Signal-Strength A Indicator (RSSI) •Peripherals – Suitable for Systems Targeting Compliance – 12-Bit ADC with Eight Channels and With Worldwide Radio Frequency Configurable Resolution Regulations: ETSI EN 300 328 and EN 300 – Integrated High-Performance Op-Amp and 440 Class 2 (Europe), FCC CFR47 Part 15 Ultralow-Power Comparator (US), and ARIB STD-T66 (Japan) – General-Purpose Timers (One 16-Bit, Two •Layout 8-Bit) – Few External Components – 21 General-Purpose I/O Pins (19× 4 mA, 2× – Reference Design Provided 20 mA) – 6-mm × 6-mm QFN40 Package – 32-kHz Sleep Timer With Capture •Low Power – Two Powerful USARTs With Support for – Active Mode RX Down to 19.6 mA Several Serial Protocols – Active Mode TX (–6 dBm): 24 mA – Full-Speed USB Interface – Power Mode 1 (3-μs Wake-Up): 235μA – IR Generation Circuitry – Power Mode 2 (Sleep Timer On): 0.9μA – Powerful Five-Channel DMA – Power Mode 3 (External Interrupts): 0.4μA – AES Security Coprocessor – Wide Supply Voltage Range (2 V–3.6 V) – Battery Monitor and Temperature Sensor – Full RAM and Register Retention in All – Each CC2540 Contains a Unique 48-bit Power Modes IEEE Address 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2SmartRF is a trademark of Texas Instruments. 3Bluetoothis a registered trademark of Bluetooth SIG, Inc. 4Supported by IAR Embedded Workbench is a trademark of IAR Systems AB. 5ZigBee is a registered trademark of ZigBee Alliance. 6All other trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Copyright © 2010–2013, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. CC2540F128, CC2540F256 SWRS084F – OCTOBER 2010 – REVISED JUNE 2013www.ti.com SOFTWARE FEATURESAPPLICATIONS •Bluetoothv4.0 Compliant Protocol Stack for•2.4-GHzBluetoothlow energy Systems Single-Mode BLE Solution •Mobile Phone Accessories – Complete Power-Optimized Stack, •Sports and Leisure Equipment Including Controller and Host •Consumer Electronics – GAP – Central, Peripheral, Observer, or •Human Interface Devices (Keyboard, Mouse, Broadcaster (Including Combination Remote Control) Roles) •USB Dongles – ATT / GATT – Client and Server •Health Care and Medical – SMP – AES-128 Encryption and Decryption CC2540 WITH TPS62730 – L2CAP •TPS62730is a 2 MHz Step Down Converter – Sample Applications and Profiles with Bypass Mode – Generic Applications for GAP Central •Extends Battery Lifetime by up to 20% and Peripheral Roles •Reduced Current in TX and RX – Proximity, Accelerometer, Simple Keys, •30 nA Bypass Mode Current to Support Low and Battery GATT Services Power Modes – Multiple Configuration options •RF…

Text truncated - open the document above for the full version.

Analysis Report Report No.: 14061542HKG-001 The Equipment Under Test (EUT) is a Bluetooth Smart Switch. The EUT is using direct sequence spread spectrum for Bluetooth module. The Bluetooth can support Bluetooth 4.0 BLE only. The Bluetooth portion operates in frequency range from 2402MHz to 2480MHz. The EUT is powered by AC Mains (120VAC 15A 1800W max). Module: Modulation Type: GFSK Antenna Type: Integral, Internal Frequency Range: 2402MHz – 2480MHz,2MHz channel spacing, 40 channels. Nominal field strength is 91.0dBμV/m @ 3m Production Tolerance of field strength is +/- 3dB Antenna gain is 0dBi According to the KDB 447498: Based on the Maximum allowed field strength of production tolerance was 94.0dBμV/m at 3m in frequency 2.4GHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 0.75mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 0.75mW The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.48) mW = 9.53 mW Since the above conducted output power is well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing.

RF Module 140418 RF Module 20120425 -1 B 1 1 REV: SIZE: CODE: DRAWN: DATED: DATED: CHECKED:QUALITY CONTROL: DATED: DATED: RELEASED: COMPANY:TITLE: DRAWING NO: SHEET: OF SCALE: REVISION RECORD APPROVED: ECO NO: ABD DATE: 1 2 3 4 5 6 DCAB C LTR 1 DGUSB 2 USB_P 3 USB_N 4 DVUSB 5 P1.5 6 P1.4 7 P1.3 8 P1.2 9 P1.1 10 DV2 30 BIAS 29 AV4 28 AV1 27 AV2 26 RF_N 25 RF_P 24 AV3 23 XOSC2 22 XOSC1 21 AV5 31 AV6 32 P2.4/32KA 33 P2.3/32KB 34 P2.2 35 P2.1 36 P2.0 37 P1.7 38 P1.6 39 DV1 40 DECO 20 RST 19 P0.0 18 P0.1 17 P0.2 16 P0.3 15 P0.4 14 P0.5 13 P0.6 12 P0.7 11 P1.0 U1 CC2540 TP1TP2 C1 1n C2 1n C3 1n J1 Debugger Port C5 2u2 Y1 32 768 XTAL_4X1MM5 C6 15p C7 15p R2 56K L101 6n8H C8 1n R3 2K2 C10 100p C11 100p C12 100n C51 18p C61 18p C52 1p C621pL61 2nH L51 2nH L52 L53 C53 ANT! Y2 32MHz XTAL-SMD-32254B C1312p C1412p +3V +3V P2.2P2.1RST RST P2.1P2.2

lntertek valued Quality. D€livercd. lssuing Laboratory: lntertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKI-AS 005 - TEST) under HOKLAS for specif c laboratory ac:tiv¡lios as lislod in the HOKI-AS direclory of accredited leboratories. TEST REPORT Report No.: 14061 542HKG-001 ECO.LOGIC PRODUCTS LIMITED Application For Certification (Original Grant) (FCC lD: 2AGY7-EMW770) (lC: 12321A-EMW770) Transceiver Prepared [, and Checked by: Approved by: Wong Kwok Yeung, Kenneth Lead Engineer lntsrtok's standard Tems and Cond¡tions €n bB obts¡nsd at ourwsbsit€ http:/ rw.int€rl€k.com/temd. This r€port shall not be ßprcduc€d, exæpt ¡n full This report ¡s lor the oxc¡us¡ve uso of lntertek's Clienl and is provid€d pursuant to thô Egre€ment bôtween lntertek and its Client, lnt€rlek's r€spons¡bil¡ty ând l¡sb¡l¡ty Ere limited to the t8ms and ænditlons of llìe agßement. lntertek åssumes no lisb¡lily to any parly, olher lhan lo the Cl¡ent in aæordanæ w¡th the egreement, for âny loss, expanso or d8m8ge oæs¡on€d by th€ uss of this ßport. Only lhô Cl¡€nt is authorized to psmit æpy¡ng or distribution of this report snd thên only ¡n its ôntjrety. Any uso of lhe lntertek name or one of its marks for th6 sale or sdvert¡sement of the tosl€d mat€riâ|, producl or s€Mæ must first bs âpproved ln writ¡ng by lnl€rtek The obseryåtions snd t€st results ln lh¡s rsport ar€ relôvsnt only to lhe sample tested. This r€port by itsôlf do€s not imply thal th€ msterial, producl, or s6ryiæ ¡s or hss ôver been und6r sn lnterlôk ærtifìæt¡on program lntertek Testing Services Hong Kong Ltd. 2F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Supervisor Date: September 03, 2014 Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 14061542HKG-001 i FCC ID:2ACY7-EMW770 IC: 12321A-EMW770 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Grantee: ECO-LOGIC PRODUCTS LIMITED Grantee Address: Unit 2113-2115, 21/F., Landmark North, 39 Lung Sum Avenue, Sheung Shui, N.T., Hong Kong. Contact Person: Tim Fong Tel: 3484 9184 Fax: N/A e-mail: [email protected] Manufacturer: DONGGUAN ECO-LOGIC TECHNOLOGY LIMITED Manufacturer Address: Dichong Second Industrial Zone, Gaolong Road, Gaobu Town, Dongguan City, Guangdong Province, China Brand Name: ELP Model: EMW770 Type of EUT: Transceiver Description of EUT: Smart Switch Serial Number: N/A FCC ID / IC: 2ACY7-EMW770 / 12321A-EMW770 Date of Sample Submitted: June 30, 2014 Date of Test: June 30, 2014 to August 29, 2014 Report No.: 14061542HKG-001 Report Date: September 03, 2014 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 14061542HKG-001 ii FCC ID:2ACY7-EMW770 IC: 12321A-EMW770 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com SUMMARY OF TEST RESULT TEST SPECIFICATION REFERENCE RESULTS Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 7.2.4 Pass Transmitter Field Strength and Bandedge Requirement 15.249 / RSS-210 A2.9 Pass Radiated Emission in Restricted Bands 15.205 / RSS-210 2.2 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2012 Edition RSS-210 Issue 8, December 2010 RSS-Gen Issue 3, December 2010 Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 14061542HKG-001 iii FCC ID:2ACY7-EMW770 IC: 12321A-EMW770 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 General Description............................................................................................ 1 1.1 Product Description ........................................................................................... 1 1.2 Related Submittal(s) Grants ............................................................................... 1 1.3 Test Methodology .............................................................................................. 1 1.4 Test Facility ....................................................................................................... 1 2.0 System Test Configuration ................................................................................. 2 2.1 Justification........................................................................................................ 2 2.2 EUT Exercising Software ................................................................................... 2 2.3 Special Accessories.........................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Mode: Transmission FCC ID: 2ACY7-EMW770 IC:12321A-EMW770 config photos (radiated emission) - 1 of 1 Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Mode: Power on FCC ID:2ACY7-EMW770 IC: 12321A-EMW770 config photos (conducted emission) - 1 of 2 Conducted Emission Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs – Mode: Power on FCC ID:2ACY7-EMW770 IC: 12321A-EMW770 config photos (conducted emission) - 2 of 2 Conducted Emission Left Side View