2AD22MSP340GSM/GPRS/GPS Pet Tracker

THE BEST PET TRACKER Box includesInstalling SIM card Charging and Clip assembling Buckle Clip 1. The tbpt tracker 2. Clip 3. USB Cable 4. Waterproof plug 5. Screwdriver 6. AC Adapter 1. Loosen 4 screws with the screw driver. 2. Remove the back cover and insert the SIM card into the holder with the gold-colored contacts facing downwards. 3. Put the cover back with the USB side and tighten 4 screws back. 4. insert four waterproof plugs over the screws. 5. Press power button for 2 seconds to turn on pet tracker. 1. Connect the pet tracker to the AC Adapter via the USB cable. 2. 1~2 hours for the fully charge Put the collar through the clip. ** Output: 5V/ 500mA ** Output: 5V/ 500mA Assemble pet tracker and the clip according to the arrow mark on the both side. And turn counterclockwise to lock it. 1. 3. 2. 4. 5. Power button USB for Charging LED SIM card insert side Arrow mark Warning ! tbpt Tracker Quick Guide 1 2 4 3 5 LOCK UNLOCK (Option) 6. Features: 1. No more platform fee, just download the free exclusive smart phone application, you can start tracking tbpt tracker device. 2. Need one SIM card to insert into the tbpt tracker device. 3. Tracking feature:GPS/AGPS/GSM/SMS/LBS 4. Operation: - Support Google map. - GPS fix data send to owner’s cell phone. 5. Pet’s owner only need to call the Number of the SIM card in the device, then it will respond the data automatically. 6. 8 pin USB for Charging. 7. Battery (Li-Polymer) is 500mAh 8. Tbpt tracker for GPRS Dial the SIM card number Real-time location Geo-Fence SettingReal-time TrackingGPS Setting ! Inclusion: Alert SMS will be sent when the pet run out of the Geo-Fence area you set.. Set the diameter (meter) of the Geo-Fence GPS: GPS location LBS: LBS (LAC cell ID) The deviation of LBS position in the city is 100~300meter and in the county side is 500meter~1kilometer. If you prefer more precise location, you may turn on the GPS. Please note that using GPS may cause higher power consuming The default setting is GPS off, so you will only receive the LBS (LAC cell ID) position. The purpose is power saving. When the device is in low power , it will send alert SMS to notification number CE This device complies with the R&TTE Directive (99/5/EC), the EMC Directive (2004/108/EC), and the Low. Voltage Directive (2006/95/EC) issued by the Commission of the European Community. A minimum separation distance of 20 cm must be maintained between the user’s body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe. FCC Federal Communication Commission Interference Statement .This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to. Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Please make sure the SIM card is already activated and ready to use. Additionally, confirm the PIN code is free before install the SIM card. If not, please use other mobile phone to cancel the PIN code or ask the local carrier for more information. The pet tracker only supports GSM and GPRS system. Therefore, it is not working with CDMA or WCDMA system. We recommend charging as soon as you receive the low battery notification. Please set the low power alert before use tbpt tracker. 4 5 6 Add device 2 Download APP 1 Low power alert setting 3 Tap Icon Tap the iconTap the GPS icon to turn on/off GPS It may take seconds to have the GPS fixed. Wait for a moment and refresh again to get GPS location Reflash Tap ok Distance setting Please dial the SIM card number manually, and hang up phone after hearing ringtone. You will get the current location. Add device Add Delete History Playback Setting Select Add Delete History Playback Setting Select Cancel Low power alert setting Setting Select device 353301054053918 OKCanel SOS & Low Power alert setting enter phone number ReadingSaveBack The SMS alert function works differently according to the model. Please refer to the appropriate manual. Notification SMS will send to the number you entered. APP will dial the device automatically. It will hang up automatically. (Some smart phone will not hang up automatically) This function may cause extra SMS charge, when using Geo-Fence, GPS will be forced to turn on. Select device Tap ok Reading: For checking the previous setting number. The standby mode will be activated automatically if the tbpt tracker keeps still for 3 minutes ( GSM off /GPS off ). The tbpt tracker cannot be tracked under standby mode. Please touch the tbpt tracker slightly to wake it up. Standby Mode Alarm detection. Please set the geo-fence(Meter) OKCancel 000 100 000 Coordinates: (25.06795,121.59350) To set Geo-Fence here? Waring: This function will have an SMS fee, and the GPS will beforced to turn on. OKCancel Select device 353301054053918 OKCanel Nickname: 353301054053918 IMEI: 353301054053918 TIME: 2012-12-20 18:00)33 Location: 28, Lane 123, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei LBS-Cell ID (MSP340) Location More ReflashGPSIconBack Nickname: 353301054053918 IMEI: 353301054053918 TIME: 2012-12-20 18:00)33 Location: 28, Lane 1…

Text truncated - open the document above for the full version.

Page 1 of 8 Report No.: 141118C20 CONSTRUCTION PHOTOS OF EUT Brand Name: TBPT / Model Name: MSP340 Page 2 of 8 Report No.: 141118C20

Page 3 of 8 Report No.: 141118C20 Page 4 of 8 Report No.: 141118C20 Page 5 of 8 Report No.: 141118C20 Page 6 of 8 Report No.: 141118C20 Page 7 of 8 Report No.: 141118C20 Page 8 of 8 Report No.: 141118C20

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 24 Report No. : SA141118C20B Issued Date : Feb. 17, 2015 Reference No.: 150216C19 FCC SAR Test Report Report No. : SA141118C20B Applicant : Tracker Technology International Co., Ltd. Address : 3F-2, 28, Lane 123, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei 11490, Taiwan, R.O.C. Product : GSM/ GPRS/ GPS Pet Tracker FCC ID : 2AD22MSP340 Brand : TBPT Model No. : MSP340 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 447498 D01 v05r02 / KDB 941225 D03 v01 Sample Received Date : Feb. 16, 2015 Date of Testing : Feb. 16, 2015 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 24 Report No. : SA141118C20B Issued Date : Feb. 17, 2015 Reference No.: 150216C19 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ...........................................................................................…

Text truncated - open the document above for the full version.

FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 1 of 7 Report No. : SA141118C20 Issued Date : Jan. 23, 2015 FCC MPE Evaluation Report Report No. : SA141118C20 Applicant : Tracker Technology International Co., Ltd. Address : 3F-2, 28, Lane 123, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei 11490, Taiwan, R.O.C Product : GSM/ GPRS/ GPS Pet Tracker Brand : TBPT Model No. : MSP340 Standards : FCC Part 2 (Section 2.1091) KDB 447498 D01 Sample Received Date : Nov. 18, 2014 Date of Evaluation : Jan. 13, 2015 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Rona Chen / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 2 of 7 Report No. : SA141118C20 Issued Date : Jan. 23, 2015 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Description of Equipment Under Test ................................................................................................................................. 4 2. MPE (Maximum Permissible Exposure) Assessment ......................................................................................................... 5 2.1 Introduction .................................................................................................................................................................. 5 2.2 RF Radiation Exposure Limits ...................................................................................................................................... 5 2.3 MPE Assessment Method ............................................................................................................................................ 6 2.4 MPE Calculation for Standalone Operations ................................................................................................................ 6 3. Information on the Testing Laboratories ............................................................................................................................. 7 FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 3 of 7 Report No. : SA141118C20 Issued Date : Jan. 23, 2015 Release Control Record Report No. Reason for Change Date Issued SA141118C20 Initial release Jan. 23, 2015 FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 4 of 7 Report No. : SA141118C20 Issued Date : Jan. 23, 2015 1. Description of Equipment Under Test EUT Type GSM/ GPRS/ GPS Pet Tracker Brand Name TBPT Model Name MSP340 Tx Frequency Bands (Unit: MHz) GSM850 : 824.2 ~ 848.8 GSM1900 : 1850.2 ~ 1909.8 Uplink Modulations GSM & GPRS : GMSK Antenna Type Fixed Internal Antenna EUT Stage Production Unit Note: 1. The above EUT information is declared by manufacturer and for more detailed features description please refers to the manufacturer's specifications or User's Manual. List of Accessory: Battery Brand Name Shen zhen kingpower new energy CO., LTD Model Name 802035 Power Rating 3.7Vdc, 500mAh Type Li-ion USB Cable Brand Name YONGHAO Model Name 28AWG Signal Line Type 0.8 meter non-shielded cable with ferrite core FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 5 of 7 Report No. : SA141118C20 Issued Date : Jan. 23, 2015 2. MPE (Maximum Permissible Exposure) Assessment 2.1 Introduction According to 47 CFR §2.1091, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitting antenna and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 cm separation requ…

Text truncated - open the document above for the full version.

Report No.: RF141118C20 1 of 29 Report Format Version 5.0.0 FCC TEST REPORT (PART 22) REPORT NO.: RF141118C20 MODEL NO.: MSP340 FCC ID: 2AD22MSP340 RECEIVED: Nov. 18, 2014 TESTED: Dec. 25, 2014 ISSUED: Jan. 23, 2015 APPLICANT: Tracker Technology International Co., Ltd. ADDRESS: 3F-2, 28, Lane 123, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei 11490, Taiwan, R.O.C ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141118C20 2 of 29 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 3 1 CERTIFICATION ................................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ........................................................................................................... 5 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 5 2.2 TEST SITE AND INSTRUMENTS ................................................................................................. 6 3 GENERAL INFORMATION ................................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................................................... 9 3.4 TEST ITEM AND TEST CONFIGURATION ................................................................................ 10 3.5 EUT OPERATING CONDITIONS ................................................................................................ 11 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 11 4 TEST TYPES AND RESULTS ............................................................................................................. 12 4.1 OUTPUT POWER MEASUREMENT .......................................................................................... 12 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ............................................................. 12 4.1.2 TEST PROCEDURES ....................................................................................................... 12 4.1.3 TEST SETUP .................................................................................................................... 13 4.1.4 TEST RESULTS ................................................................................................................ 14 4.2 FREQUENCY STABILITY MEASUREMENT .............................................................................. 15 4.2.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT ................................................. 15 4.2.2 TEST PROCEDURE ......................................................................................................... 15 4.2.3 TEST SETUP .................................................................................................................... 15 4.2.4 TEST RESULTS ................................................................................................................ 16 4.3 OCCUPIED BANDWIDTH MEASUREMENT .............................................................................. 17 4.3.1 TEST PROCEDURES ....................................................................................................... 17 4.3.2 TEST SETUP .................................................................................................................... 17 4.3.3 TEST RESULTS ................................................................................................................ 18 4.4 BAND EDGE MEASUREMENT .................................................................................................. 19 4.4.1 LIMITS OF BAND EDGE MEASUREMENT ..................................................................... 19 4.4.2 TEST SETUP .................................................................................................................... 19 4.4.3 TEST PROCEDURES .............…

Text truncated - open the document above for the full version.

Report No.: RF141118C20-1 1 of 31 Report Format Version 5.0.0 FCC TEST REPORT (PART 24) REPORT NO.: RF141118C20-1 MODEL NO.: MSP340 FCC ID: 2AD22MSP340 RECEIVED: Nov. 18, 2014 TESTED: Dec. 25, 2014 ISSUED: Jan. 23, 2015 APPLICANT: Tracker Technology International Co., Ltd. ADDRESS: 3F-2, 28, Lane 123, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei 11490, Taiwan, R.O.C ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF141118C20-1 2 of 31 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 3 1 CERTIFICATION ................................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ........................................................................................................... 5 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 5 2.2 TEST SITE AND INSTRUMENTS ................................................................................................. 6 3 GENERAL INFORMATION ................................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................................................... 9 3.4 TEST ITEM AND TEST CONFIGURATION ................................................................................ 10 3.5 EUT OPERATING CONDITIONS ................................................................................................ 11 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 11 4 TEST TYPES AND RESULTS ............................................................................................................. 12 4.1 OUTPUT POWER MEASUREMENT .......................................................................................... 12 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ............................................................. 12 4.1.2 TEST PROCEDURES ....................................................................................................... 12 4.1.3 TEST SETUP .................................................................................................................... 13 4.1.4 TEST RESULTS ................................................................................................................ 14 4.2 FREQUENCY STABILITY MEASUREMENT .............................................................................. 15 4.2.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT ................................................. 15 4.2.2 TEST PROCEDURE ......................................................................................................... 15 4.2.3 TEST SETUP .................................................................................................................... 15 4.2.4 TEST RESULTS ................................................................................................................ 16 4.3 OCCUPIED BANDWIDTH MEASUREMENT .............................................................................. 17 4.3.1 TEST PROCEDURES ....................................................................................................... 17 4.3.2 TEST SETUP .................................................................................................................... 17 4.3.3 TEST RESULTS ................................................................................................................ 18 4.4 PEAK TO AVERAGE RATIO ............................................…

Text truncated - open the document above for the full version.