2AD4XTHRASH212GOTHRASH212 GO

ENESFRDE QUICK START GUIDE www.mackie.com 12" BATTERY-POWERED LOUDSPEAKER 2 THRASH2fl2 GO fl2" Battery-Powered Loudspeaker THRASH2fl2 GO fl2" Battery-Powered Loudspeaker 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases or beer glasses, shall be placed on the apparatus. 15. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications to this device not expressly approved by LOUD Audio, LLC could void the user’s authority to operate the equipment under FCC rules. PORTABLE CART WARNING CAUTION The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the prescence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of significant magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK! DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user of the prescence of important operating and maintaining (servicing) instructions in the literature accompanying the appliance. WARNING — To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION — To prevent electric shock hazard, do not connect to mains power supply while grille is removed. CAUTION — Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 17. The equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 18. The maximum ambient temperature during use of the appliance must not exceed 45 ̊ C. 19. Operation frequency: 2400MHz – 2483.5MHz 20. 21. This apparatus has been designed with Class-I construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding prong). 22. This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. ATTENTION — Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant las limites applicables aux appareils numériques de class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage radioélectrique édicté par les ministere des communications du Canada. 23. This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s)]. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Exposure to extrem…

Text truncated - open the document above for the full version.

LOUD Audio, LLC 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name:LOUD Audio, LLC Address:19820 North Creek Parkway #201, Bothell, WA 98011-8227, United States Product Name:THRASH212 GO FCC ID:2AD4XTHRASH212GO Model(s):THRASH212 GO 2.911(d)(5)(i) Equipment Type We, [LOUD Audio, LLC] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name:Kenny Sheng Date:2023-4-8 Title and Company name: Sr. Manager of SQE/LOUD Audio, LLC NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LOUD Audio, LLC 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name:LOUD Audio, LLC Address:19820 North Creek Parkway #201, Bothell, WA 98011-8227, United States Product Name:THRASH212 GO FCC ID:2AD4XTHRASH212GO Model(s):THRASH212 GO 2.911(d)(5)(ii) Applicant filing We, [LOUD Audio, LLC] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:Kenny Sheng Date:2023-4-8 Title and Company name: Sr. Manager of SQE/LOUD Audio, LLC NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

LOUD Audio, LLC 2.911 (d)(7)USA Agent v1.3 Section 2.911(d)(7) USA Agent for Service of Process Company name:LOUD Audio, LLC Address:19820 North Creek Parkway #201, Bothell, WA 98011-8227, United States Product Name:THRASH212 GO FCC ID:2AD4XTHRASH212GO Model(s):THRASH212 GO 2.911(d)(7) USA Designated Agent for Service of Process We, [LOUD Audio, LLC] (“the applicant”) designate [LOUD Audio, LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name:LOUD Audio, LLC Address:19820 North Creek Parkway #201, Bothell, WA 98011-8227, United States FRN:0022261655 Contact Name:Kenny Sheng Telephone No:86-0755-88351509 Extension:112 Email:[email protected] Applicant Company name:LOUD Audio, LLC Address:19820 North Creek Parkway #201, Bothell, WA 98011-8227, United States FCC Grantee Code:2AD4X Contact Name:Kenny Sheng Telephone No:86-0755-88351509 Extension:112 Email:[email protected] Signature: Title:Sr. Manager of SQE Signature: Title:Sr. Manager of SQE Date:2023-4-8 Date:2023-4-8 LOUD Audio, LLC 2.911 (d)(7)USA Agent v1.3 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

LOUD Audio, LLC Agent Authorization Company:LOUD Audio, LLC Address:19820 North Creek Parkway #201, Bothell, WA 98011-8227, United States Product Name:THRASH212 GO Model Number(s):THRASH212 GO Product Description:Frequency in 2402-2480MHz, BT mode operation. We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-4-8 Name: Kenny Sheng Title: Sr. Manager of SQE Company: LOUD Audio, LLC

LOUD Audio, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-03-13 Subject; Request for Confidentiality FCC ID: 2AD4XTHRASH212GO To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name:Kenny Sheng Title:Sr. Manager of SQE

FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO

CMIIT ID: XXXXXXXXXXX XXX-XXXXXX

FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO BTAnt FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO

RFExposureevaluation Exposurecategory:Generalpopulation/uncontrolledenvironment EUTType:ProductionUnit DeviceType:MobileDevice ReferStandard:KDB447498D01GeneralRFExposureGuidancev06 FCCPart2§2.1091 FCCID:2AD4XTHRASH212GO 1.Reference Accordingto§1.1307(b)(1),systemsoperatingundertheprovisionsofthissectionshallbe operatedinamannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergy levelinexcessoftheCommission’sguidelines. Accordingto§1.1310and§2.1091RFexposureiscalculated. KDB447498D01:MobileandPortableDevicesRFExposureProceduresandEquipment AuthorizationPolicies 2.Limit LimitsforMaximumPermissibleExposure(MPE)/ControlledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.06141.63(100)*6 3.0–301842/f4.89/f(900/f 2 )*6 30–30061.40.1631.06 300–1500//f/3006 1500–100,000//56 LimitsforMaximumPermissibleExposure(MPE)/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.06141.63(100)*30 3.0–30824/f2.19/f(180/f 2 )*30 30–30027.50.0730.230 300–1500//f/150030 1500–100,000//1.030 F=frequencyinMHz *=Plane-waveequivalentpowerdensity 3.MPECalculationMethod PredicationofMPElimitatagivendistance Equationfrompage18ofOETBulletin65,Edition97-01 S=PG/4πR² Where:S=powerdensity P=powerinputtoantenna G=powergainoftheantennainthedirectionofinterestrelativetoanisotropicradiator R=distancetothecenterofradiationoftheantenna 4.Result AsdeclaredbytheApplicant,theEUTisawirelessdeviceusedinafixapplication,atleast 20cmfromanybodypartoftheuserornearbypersons;fromthemaximumEUTRFoutput power,theminimumseparationdistance,r=20cm,aswellasthegainoftheusedBTantenna is2.81dBi,theRFpowerdensitycanbeobtained. EDR Freq. (MHz) Output Power (dBm) Targetpower W/tolerance (dBm) Maxtuneup power tolerance (dBm) Outputpower toantenna (mW) Ant Gain (dBi) Power Densityat R=20cm (mW/cm2) Limit (mW/c m2) Result GFSK 2402 2.4632±1.03 1.995 2.81 0.00076 1Pass 24413.7554±1.05 3.162 2.81 0.00120 1Pass 24802.6323±1.04 2.512 2.81 0.00095 1Pass π/4DQPSK 24022.3572±1.03 1.995 2.81 0.00076 1Pass 24413.4453±1.04 2.512 2.81 0.00095 1Pass 24802.6323±1.04 2.512 2.81 0.00095 1Pass 8DPSK 24022.7853±1.04 2.512 2.81 0.00095 1Pass 24413.4523±1.04 2.512 2.81 0.00095 1Pass 24802.9083±1.04 2.512 2.81 0.00095 1Pass BLE Freq. (MHz) Output Power (dBm) Targetpower W/tolerance (dBm) Maxtuneup power tolerance (dBm) Outputpower toantenna (mW) Ant Gain (dBi) Power Densityat R=20cm (mW/cm2) Limit (mW/c m2) Result GFSK 24022.883 3±1.04 2.512 2.81 0.00095 1Pass 2440 1.849 2±1.03 1.995 2.81 0.00076 1Pass 2480 -0.025 0±1.01 1.259 2.81 0.00048 1Pass Note:Theestimationdistanceis20cm 5.Conclusion ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1091fortheuncontrolled RFExposureofmobiledevice.

Project No.: ZKT-230316L1777-1 Page 1 of 73 FCC Part 15C&RSS-247 Test Report FCC ID:2AD4XTHRASH212GO IC:12714A-THRASH212GO Report Number. .................................... : ZKT-230316L1777-1 Date of Test ............................................ Feb. 10, 2023 to Apr. 17, 2023 Date of issue ......................................... : Apr. 18, 2023 Total number of pages.........................73 Test Result .......................................... : PASS Testing Laboratory. .............................. : Shenzhen ZKT Technology Co., Ltd. Address ............................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ................................ : LOUD Audio, LLC Address ............................................... : 19820 North Creek Parkway, Suite #201, Bothell, WA 98011-8227, USA Manufacturer's name ......................... : LOUD Audio, LLC Address ............................................... : 19820 North Creek Parkway, Suite #201, Bothell, WA 98011-8227, USA Test specification: Standard ................................................ : FCC CFR Title 47 Part 15 Subpart C Section 15.247 RSS-247 Issue 2: February 2017 RSS-GEN, Issue 5: March 2019 ANSI C63.10:2013 Test procedure.....................................: / Non-standard test method ................ :N/A Test Report Form No. ....................... : TRF-EL-111_V0 Test Report Form(s) Originator.....: ZKT Testing Master TRF ........................................ : Dated: 2021-04-22 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name.......................................: THRASH212 GO Trademark ........................................... : Model/Type reference ......................... : THRASH212 GO Ratings .................................................. : 100-240V~50-60Hz 75W or DC 11.1V from built-in battery Project No.: ZKT-230316L1777-1 Page 2 of 73 Testing procedure and testing location: Testing Laboratory .......................................... : Shenzhen ZKT Technology Co., Ltd. Address ............................................................ : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Alen He Tested by (name + signature) ....................... : Joe Liu Reviewer (name + signature).......................: Lake Xie Approved (name + signature) ....................... : Project No.: ZKT-230316L1777-1 Page 3 of 73 Table of Contents Page 1. VERSION.............................................................5 2. TEST SUMMARY......................................................6 2.1 TEST FACILITY....................................................... 7 2.2 MEASUREMENT UNCERTAINTY....................................... 7 3. GENERAL INFORMATION............................................. 8 3.1 GENERAL DESCRIPTION OF EUT..................................... 8 3.2 Test Setup Configuration............................................... 9 3.3 Support Equipment.................................................... 9 3.4 Test Mode...........................................................10 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS............................. 11 4.EMCEMISSIONTEST................................................ 12 4.1 Conducted emissions................................................. 12 4.1.1 POWER LINE CONDUCTED EMISSION Limits........................ 12 4.1.2 TEST PROCEDURE................................................ 12 4.1.3 DEVIATION FROM TEST STANDARD................................ 12 4.1.4 TEST SETUP...................................................... 13 4.1.5 EUT OPERATING CONDITIONS..................................... 13 4.1.6 Test Result........................................................ 14 4.2 Radiated emissions...................................................18 4.2.1 Radiated Emission Limits............................................ 18 4.2.2 TEST PROCEDURE................................................ 18 4.2.3 DEVIATION FROM TEST STANDARD................................ 19 4.2.4 TEST SETUP...................................................... 19 4.2.5 EUT OPERATING CONDITIONS..................................... 20 4.2.6 TEST RESULTS....................................................21 5. RADIATED BAND EMISSION MEASUREMENT..........................28 5.1 Test Requirement:....................................................28 5.2 TEST PROCEDURE..................................................28 5.3 DEVIATION FROM TEST STANDARD..................................29 5.4 TEST SETUP........................................................29 5.5 EUT OPERATING CONDITIONS.......................................29 5.6 TEST RESULT.......................................................30 6. CONDUCTED BAND EDGE AND SPURIOUS EMISSION................. 31 6.1 Limit................................................................31 6.2 Test Setup.......................................................... 31 6.3 Test procedure.......................................................31 6.4 DEVIATION FROM STANDARD....................................... 31 6.5 Test Result.......................................................... 32 7. 20DB BANDWIDTH & 99% OCB....................................... 44 7.1 Test Setup.......................................................... 44 7.2 Limit................................................................44 7.3 Test procedure.........................................…

Text truncated - open the document above for the full version.

RPORTNo.：SZ19080340E01 TESTREPORT Applicant:SHANGHAIMOUNTAINVIEWSILICONCO,.LTD PRODUCTNAME:MV_BP10xxPCBAntenna MODELNAME: TRADENAME: MV_BP10 MVSILICON BRANDNAME:MVSILICON STANDARD(S):ANSI/IEEEStd149-2008 RECEIPTDATE:2019-08-30 TESTDATE ISSUEDATE :2019-09-02 :2019-10-15 Editedby: ChiShide(Rapporteur) Approvedby: AndyYeh(TechnicalDirector) NOTE:ThisdocumentisissuedbyMORLAB,thetestreportshallnotbereproducedexceptinfullwithoutpriorwrittenpermissionofthe company.Thetestresultsapplyonlytotheparticularsample(s)testedandtothespecifictestscarriedoutwhichisavailableonrequestfor validationandinformationconfirmedatourwebsite. MORLAB SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555 Http://www.morlab.cn Fax:86-755-36698525 E-mail:[email protected] Page1of12 REPORTNo.：SZ19080340E01 SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China MORLAB Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page2of12 DIRECTORY 1.TechnicalInformation∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙3 1.1.ManufacturerandFactoryInformation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙3 1.2.EquipmentUnderTest(EUT)Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙3 2.TestResults ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙4 2.1.AppliedReferenceDocuments ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙4 2.2.TestConditions ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙4 2.3.TestResultslists∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙4 AnnexAPhotographs ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙6 AnnexBFigures ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7 1. 2DRadiationPattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7 2.3DRadiationPattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙9 3.ReturnLoss ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙10 4.VSWR∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙11 5.InputImpedance∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙11 AnnexDGeneralInformation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙14 1.1IdentificationoftheResponsibleTestingLaboratory∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙14 1.2IdentificationoftheResponsibleTestingLocation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙14 1.3TestEquipmentsUtilized ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙14 ChangeHistory VersionDateReasonforchange 1.02019-10-15Firstedition REPORTNo.：SZ19080340E01 SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China MORLAB Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page3of12 1.TechnicalInformation Note:Providebymanufacturer. 1.1.ManufacturerandFactoryInformation Applicant:SHANGHAIMOUNTAINVIEWSILICONCO,.LTD ApplicantAddress:Suite4C,Building3,1238 District,Shanghai,China ZhangjiangRoad,PudongNew Manufacturer:SHANGHAIMOUNTAINVIEWSILICONCO,.LTD ManufacturerAddress:Suite4C,Building3,1238 District,Shanghai,China ZhangjiangRoad,PudongNew 1.2.EquipmentUnderTest(EUT)Description WirelessTypeN/A FrequencyN/A REPORTNo.：SZ19080340E01 SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China MORLAB Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page4of12 2.TestResults 2.1.AppliedReferenceDocuments Leadingreferencedocumentsfortesting: No.IdentityDocumentTitle 1 ANSI/IEEEStd149-2008 IEEEStandardTestProceduresforAntennas 2.2.TestConditions TestEnvironmentConditions ： RelativeHumidity:25...75% Temperature:+10°Cto+30°C 2.3.TestResultslists 2.3.1. Gain FrequencyGain(dBi) 2400MHz2.10 2410MHz2.74 2420MHz2.81 2430MHz2.73 2440MHz1.01 2450MHz1.26 2460MHz1.50 2470MHz1.49 2480MHz1.42 2490MHz0.36 2500MHz0.33 REPORTNo.：SZ19080340E01 SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China MORLAB Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page5of12 2.3.2. ReturnLoss/VSWR/InputImpedance Frequency ReturnLoss (dB) VSWR Input Impedance(Ω) 2400MHz-7.232.5325.37 2440MHz-6.472.8017.99 2450MHz-6.222.9017.18 2480MHz-5.183.4415.55 2500MHz-4.563.8915.48 REPORTNo.：SZ19080340E01 SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China MORLAB Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page6of12 AnnexAPhotographs 1.TestSetup REPORTNo.：SZ19080340E01 SHENZHENMORLABCOMMUNICATIONSTECHNOLOGYCo.,Ltd. FL1-3,BuildingA,FeiYangSciencePark,No.8LongChangRoad, Block67,BaoAnDistrict,ShenZhen,GuangDongProvince,P.R.China MORLAB Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page7of1…

Text truncated - open the document above for the full version.

FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO RadiatedEmission (Below1G) RadiatedEmission (Above1G) FCCID:2AD4XTHRASH212GO IC:12714A-THRASH212GO ConductedEmission