2AD7D-KNP02Smart Security Light

FCC Requirement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

DATE:Nov.26,2015 EquipmentAutorisationDivision FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 FCCID:2AD7D-KNP02 ProductName:SmartSecurityLight Request Request Request Requestfor for for forConfidentiality Confidentiality Confidentiality Confidentiality PursuanttoSections0.457and0.459ofthecommissionsrules,weherebyrequestthat thefollowingdocumentsbeheldconfidential: (Listherethedocumentsforwhichyouareseekingconfidentiality–forexample...) •Schematics •Blockdiagram • Operationdescription Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. Dated Dated Dated Dated this this this this Agency Agency Agency Agencyagreement agreement agreement agreementexpiration expiration expiration expirationdate: date: date: date:Nov. Nov. Nov. Nov.26 26 26 26,2015 ,2015 ,2015 ,2015to to to toNov. Nov. Nov. Nov.25 25 25 25, , , ,2016 2016 2016 2016 By: By: By: By: Wei Wei Wei WeiLv Lv Lv Lv Signature Signature Signature SignaturePrinted Printed Printed Printed Title: Title: Title: Title:Engineer Engineer Engineer Engineer On On On Onbehalf behalf behalf behalfof of of of: : : :Shenzhen Shenzhen Shenzhen ShenzhenJiawei Jiawei Jiawei JiaweiPhotovoltaic Photovoltaic Photovoltaic PhotovoltaicLighting Lighting Lighting LightingCo., Co., Co., Co.,Ltd. Ltd. Ltd. Ltd. Telephone: Telephone: Telephone: Telephone:+86-755-84080069-822 +86-755-84080069-822 +86-755-84080069-822 +86-755-84080069-8223 3 3 3

                                       ! "  #$%#&'(")%*+,  #$%#&'(")%-.*  #/%#&'(")%*+,  #/%#&'(")%-.*  #0%#1'(")%*+,  #0%#1'(")%-.*  ((%#&'(")%*+,  ((%#&'(")%-.*     -  !  #$%#&'(")%*+, 2 2 2         2    2 2            3 2 -     2    4     5        "           6  7#(1%((%7$ certify the

FCCID: 2AD7D-KNP02 FCC ID:2AD7D-KNP02 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Worse case is as below: [2480 MHz 0.124dBm（1.03mW） output power] (1.03mW /5mm) ·[√2 .480 (GHz)]= 0.33 <3.0 for 1-g SAR Then SAR evaluation is not required

Report No. : EED32H00200505Page 1 of 46 1 COVER PAGE TEST REPORT Product:Smart Security Light Trade mark:MAXIMUS, KUNA Model/Type reference :SPL06-07A1N4-BKT, SPL06-07A1N4-ORB, SPL08-07A1N4-BKT, SPL08-07A1N4-ORB, SPL09-05A1N4-BKT, SPL09-05A1N4-ORB, SPL11-07A1N4-BKT, SPL11-07A1N4-ORB Serial Number:N/A Report Number:EED32H00200505 FCC ID:2AD7D-KNP02 Date of Issue:Nov. 25, 2015 Test Standards:47 CFR Part 15 Subpart C (2014) Test result:PASS Prepared for: Shenzhen Jiawei Photovoltaic Lighting Co., Ltd. No.1, 2, 3, 4, Xinfa Industry Zone, Central Community, Pingdi Road, Longgang District, Shenzhen City, Guangdong Province, P.R. China Prepared by: Centre Testing International Group Co., Ltd. Hongwei Industrial Zone, Bao’an 70 District, Shenzhen, Guangdong, China TEL: +86-755-3368 3668 FAX: +86-755-3368 3385 Compiled by:Reviewed by: Approved by:Date:Nov. 25, 2015 Sheek Luo Lab supervisor Check No.: 2295532334 Report No. : EED32H00200505Page 2 of 46 2 Version Version No.Date Description 00Nov. 25, 2015Original Report No. : EED32H00200505Page 3 of 46 3 Test Summary Test ItemTest RequirementTest methodResult Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10-2013 PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10-2013 PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(3) ANSI C63.10-2013 PASS 6dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(2) ANSI C63.10-2013 PASS Power Spectral Density 47 CFR Part 15, Subpart C Section15.247 (e) ANSI C63.10-2013 PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10-2013 PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10-2013 PASS Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10-2013 PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10-2013 PASS Remark: The tested sample(s) and the sample information are provided by the client. Model No.: SPL06-07A1N4-BKT, SPL06-07A1N4-ORB, SPL08-07A1N4-BKT, SPL08-07A1N4-ORB, SPL09-05A1N4-BKT, SPL09-05A1N4-ORB, SPL11-07A1N4-BKT, SPL11-07A1N4-ORB Only the Model SPL06-07A1N4-BKT was tested, since the electrical circuit design, layout, components used and internal wiring were identical for all above models. Only different on color, size and package. Remark: Test according to ANSI C63.4-2014 Report No. : EED32H00200505Page 4 of 46 4 Content 1COVERPAGE ..................................................................................................................................................................... 1 2 VERSION .............................................................................................................................................................................. 2 3 TEST SUMMARY ................................................................................................................................................................ 3 4CONTENT ............................................................................................................................................................................ 4 5 TEST REQUIREMENT ....................................................................................................................................................... 5 5.1 T EST SETUP ................................................................................................................................................................... 5 5.1.1 For Conducted test setup ................................................................................................................................... 5 5.1.2 For Radiated Emissions test setup ................................................................................................................... 5 5.1.3 For Conducted Emissions test setup ............................................................................................................... 6 5.2 T ESTENVIRONMENT ...................................................................................................................................................... 6 5.3 T ESTCONDITION ........................................................................................................................................................... 6 6 GENERAL INFORMATION ............................................................................................................................................... 7 6.1 C LIENTINFORMATION .................................................................................................................................................... 7 6.2 G ENERALDESCRIPTION OFEUT .................................................................................................................................. 7 6.3 P RODUCTSPECIFICATION SUBJECTIVE TO THIS STANDARD ........................................................................................ 7 6.4 D ESCRIPTION OFSUPPORTUNITS ............................................................................................................................... 8 6.5 T ESTLOCATION ............................................................................................................................................................. 8 6.6 T ESTFACILITY ............................................................................................................................................................... 8 6.7 D EVIATION FROMSTANDARDS ...................................................................................................................................... 9 6.8 A BNORMALITIES FROMSTANDARDCONDITIONS .......................................................................................................... 9 6.9 O THERINFORMATIONREQUESTED BY THECUSTOMER…

Text truncated - open the document above for the full version.

FCCpart15C