2AD9D-AXTXD16Axis Transmitter

WAVE CENTRAL TRANSMIT. RECEIVE. CONNECT. 99 GARDEN PKWY, SUITE C | CARLISLE, PA 17013 | 888.736.9283 WAVECENTRALRF.COM Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/10/2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AD9D-AXTXD16 Wave Central, LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Thomas E. Doyle, II COO Wave Central, LLC

WAVE CENTRAL TRANSMIT. RECEIVE. CONNECT. 99 GARDEN PKWY, SUITE C | CARLISLE, PA 17013 | 888.736.9283 WAVECENTRALRF.COM Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/10/2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2AD9D-AXTXD16 Wave Central, LLC (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0032186355 Name: Wave Central, LLC Address: 99 Garden Parkway; Suite C, Carlisle, PA 17013 Contact Person: Thomas Doyle Tel.: 717-503-7157 Email: [email protected] Sincerely, Thomas E. Doyle, II COO Wave Central, LLC

WAVE CENTRAL TRANSMIT. RECEIVE. CONNECT. 99 GARDEN PKWY, SUITE C | CARLISLE, PA 17013 | 888.736.9283 WAVECENTRALRF.COM Date: 07-11-2023 Re: Antenna Specification: The standard Type-N connector must be put on or swapped out per our Warranty to ensure safe operation of the Transmitter. If not performed by Wave Central, damage will accrue and the unit’s performance will decrease. Professional installation is required. Sincerely, Thomas E. Doyle, II COO Wave Central, LLC

SOFTWARE SECURITY DESCRIPTION An applicant must describe the overall security measures and systems that ensure that only: 1.Authenticated software is loaded and operating the device; and 2.The device is not easily modified to operate with RF parameters outside of the authorization. The description of the software must address the following questions in the operational description for the device and clearly demonstrate how the device meets the security requirements. While the Commission did not adopt any specific standards, it is suggested that the manufacturers may consider applying existing industry standards. Also, this guide is not intended to be exhaustive and may be modified in the future. There may be follow­up questions based on the responses provide by the applicant for authorization. The device complies with KDB 594280D01 and D02 SOFTWARE SECURITY DESCRIPTION 1.Describe how any software/firmware updates for elements than can affect the device's RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturer's website or device's management system, describe the different levels of security as appropriate. Reply: Software upgrades are retrieved from the manufacturers WatchDocs account. The Manufacturer is Domo Tactical Communications Ltd. To access the WatchDocs system a login and password are required. These are issued to legitimate customers only. The product is mature now and there have been no software upgrades for the last 12 months. A login provides access to specific products only. 2.Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics? Reply: To achieve FCC compliance the frequency range is limited by factory set­up to 5.73 – 5.84GHz. These factory set range is not influenced by software upgrade. The RF parameters controlled by the software include frequency, modulation type (64QAM, 16QAM and QPSK), attenuation of maximum power, bandwidth (8,7,6MHz) and Guard interval. Only frequency is limited to achieve FCC compliance. 3.Describe in detail the authentication protocols that are in place to ensure that the source of the RF­related software/firmware is valid. Describe in detail how the RF­related software is protected against modification. Reply:Software is inherently tied to the hardware architecture. Software contains a checksum check when downloaded. 4. Describe in detail any encryption methods used to support the use of legitimate RF­related software/firmware. Reply: Compiled software is not encrypted, but is controlled by checksum 5. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for eachmode? In particular if the device acts as master in some band of operationand client in another; how is compliance ensured in each band of operation? Reply: Not applicable General Description 1. Explain if any third parties have the capability to operate a U.S.­ solddevice on any other regulatory domain, frequencies, or in any manner thatmay allow the device to operate in violation of the device's authorization ifactivated in the U.S. Reply: They do not have that capability, the frequency band is limited at the time of sale. Third-Party Access Control 2.Describe, if the device permits third­party software or firmware installation, what mechanisms are provided by the manufacturer to permitintegration of such functions while ensuring that the RF parameters of thedevice cannot be operated outside its authorization for operation in theU.S. In the description include what controls and/or agreements are inplace with providers of third­party functionality to ensure the devices'underlying RF parameters are unchanged and how the manufacturer verifies the functionality. Reply: The device does not allow third party software. 3.For Certified Transmitter modular devices, describe how the module grantee ensures that hosts manufactures fully comply with these software security requirements for U­NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter parameters are not modified outside the grant of authorization. Reply: The unit is supplied at equipment level in the USA. SOFTWARE CONFIGURATION DESCRIPTION GUIDE In addition to the general security consideration, for devices which have "User Interfaces" (UI) to configure the device in a manner that may impact the operational parameter, the following questions shall be answered by the applicant and the information included in the operational description. The description must address if the device supports any of the country code configurations or peer­peer mode communications discussed in KDB 594280 Publication D01. SOFTWARE CONFIGURATION DESCRIPTION GUIDE 1.Describe the user configurations permitted through the UI. If different levels of access are permitted for professional installers, system integrators or end­users, describe the differences. Reply: RF User settings are Frequency (limited to within 5.73 to 5.84GHz, bandwidth (8,7,6MHz), attenuation (max output power = 100mW), Modulation (64QAM, 16QAM and QPSK) and guard interval. Only frequency range is limited to achieve FCC compliance. a)What parameters are viewable and configurable by different parties? Reply: All of the above b)What parameters are accessible or modifiable tothe professional installer? Reply: All of the above Reply: i.Are the parameters in some way limited, so thatthe installers will not enter parameters that exceed those authorized? Frequency range is limited to 5.73 to 5.84GHz at time of supply Reply: ii.What controls exist that the user cannot operatethe device outside its authorization in the U.S.? Hard frequency limits p…

Text truncated - open the document above for the full version.

08/25/2022 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: Long-Term Confidentiality Request for 2AD9D-AXTXD16 To Whom It May Concern: This letter serves as an official request tor confidentiality under§ 0.457(d) and§ 0.459 of CFR 47.We have requested that the following documents required to be submitted with this application be permanently withheld from public review. • Block Diagram • S chematics •Theory of Operation These documents contain detailed system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincere!�, Thomas E. Doyle, II General Manager Wave Central, LLC

WAVE CENTRAL 08/25/2022 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short-Term Confidentiality Request for: To Whom It May Concern: TRANSMIT. RECEIVE. CONNECT. In accordance with sections 0.457 and 0.459 of CFR 47, Wave Central, LLC requests Short-Term Confidentiality for the following exhibits of this application for a period of 90 days after grant is issued: • Test setup photos Internal photos • User's manual These documents contain detailed system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Grantee will not market or distribute product during the Short-Tern, Confidentiality period requested. V\/hen the device is ready to be marketed the grantee will inform the TCB to release the Short-Term Confidentiality. Please contact me if there is any information you may need. Thomas E. Doyle, II General Manager Wave Central, LLC 99 GARDEN PKWY, SUITE C I CARLISLE, PA 17013 I 888.736.9283 WAVECENTRALRF.COM

99 GARDEN PARKWAY, SUITE C, CARLISLE, PA 17013 | WAVECENTRALRF.COM | 1.888.736.9283 • 5.8 GHz frequency band (other bands available) • 6dBi gain • 27º elevation beamwidth • 360º azimuth beamwidth • Vertical polarization • Compact cross-section • 14dB return loss, typical (1.5 to 1 VSWR) • Type N male connector • 11/16” X 10 3/8“ physical • Lightweight fiberglass housing • Stainless steel spring with rubberized shroud • Rugged design resists shock and vibration Key features: 6dBi flexible omni-directional antenna for RF transmit applications. AXIS OFLX6

Toll-free: (866) 311-3268 Fax: (480) 926-3598 www.ComplianceTesting.com [email protected] p2230006_Report 03_FCC RF Exposure_Rev 1.0 Page 1 of 4 Test Report Prepared for: Wave Central EUT Name: Axis Transmitter Model: AXISTX FCC ID: 2AD9D-AXTXD16 To FCC Part 2.1093 Date of Issue: November 30, 2022 On the behalf of the applicant: Wave Central 99 Garden Parkway – Suite C Carlisle, PA, 17013 Attention of: Tom Doyle, General Manager Ph: (717) 503-7157 Email: [email protected] Prepared By Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p2230006 Alex Macon Sr Compliance Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing All results contained herein relate only to the sample tested p2230006_Report 03_FCC RF Exposure_Rev 1.0 Page 2 of 4 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 November 30, 2022 Alex Macon Original Document p2230006_Report 03_FCC RF Exposure_Rev 1.0 Page 3 of 4 ANAB Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2017. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to the joint ISO-ILAC-IAF Communiqué dated January 2009). The tests results contained within this test report all fall within our scope of accreditation, unless noted below. Please refer to http://www.compliancetesting.com/labscope.html for current scope of accreditation. FCC Site Reg. #349717 IC Site Reg. #2044A-2 Non-accredited tests contained in this report: N/A p2230006_Report 03_FCC RF Exposure_Rev 1.0 Page 4 of 4 EUT Description Model: AXISTX Description: Commercial audio/video transmitter Serial Number: 12554 Transmitter Description Frequency Range: 5725 – 5850 MHz Antenna Type: Dipole Antenna Antenna Gain: 6 dBi Grant Output Power: 65.464 mW (Conducted) The limit is 1.0 mW/cm^2 The EUT passes with a 10cm distance. END OF TEST REPORT Formula S = P*G / 4*PI*r 2 Power Density (S) mw/cm 2 Power mW (P) Neumaric Gain (G) Distance (r 2 ) cm Duty Cycle 0.2073426070 65.464 3.98 10 1 Frequency ERP 20cm d Limit Ratio Ratio to Limit GHz mW cm mW dBm ERP dut / P th mW dBm ERP dut / P th 0.3 - 1.5 11832.000 2.677 10 1850.610 32.673 0.141 11832.000 40.731 0.022 1.5 - 6 3060.000 2.089 10 719.092 28.568 0.362 3060.000 34.857 0.085 Portable 2.1093 Mobile 2.1091 1.1307(b)(3)(i)(B) P Threshold P th (20 < d ≤ 40 cm) P th (0.5 ≤ d ≤ 20 cm) x

Toll-free: (866) 311-3268 www.ComplianceTesting.com [email protected] P2230006-02_UNII3_Rev 2.0 Page 1 of 63 Test Report Prepared for: Wave Central EUT Name: Axis Transmitter Model: AXISTX FCC ID: 2AD9D-AXTXD16 To FCC Part 15.407 Date of Issue: November 29, 2022 On the behalf of the applicant: Wave Central 99 Garden Parkway – Suite C Carlisle, PA, 17013 Attention of: Tom Doyle, General Manager Ph: (717) 503-7157 Email: [email protected] Prepared By Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p2230006 John Michalowicz Sr Compliance Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing. All results contained herein relate only to the sample tested. P2230006-02_UNII3_Rev 2.0 Page 2 of 63 Test Summary Specification Test Name Pass, Fail, N/A Comments §15.203 Antenna Requirements Pass §15.207 §15.407(b)(6) Line Conducted Emissions Pass §15.407(a)(3) Conducted Output Power Pass §15.407(a)(3),(5) Power Spectral Density Pass §15.403(i) §15.407(e) 6dB Occupied Bandwidth Pass 99% Occupied Bandwidth §15.407(b)(4) Undesirable Emissions Pass §15.205 §15.407(b)(4),(5),(6) General Field Strength Limits (Restricted Bands and Radiated Emission limits) Pass Statements of conformity are reported as: • Pass - the measured value is below the acceptance limit, acceptance limit = test limit. • Fail - the measured value is above the acceptance limit, acceptance limit = test limit. References Description CFR47, Part 15, Subpart B Unintentional Radiators CFR47, Part 15, Subpart C Intentional Radiators CFR47, Part 15, Subpart E Unlicensed Nation Information Infrastructure Devices (U-NII) ANSI C63.10-2013 American National standard for testing Unlicensed Wireless Devices ANSI C63.4-2014 Method and Measurements of Radio-Noise Emissions from low-Voltage Electrical and Electronic Equipment in the range 9kHz to 40GHz. ISO/IEC 17025:2005 General requirements for the Competence of Testing and Calibrations Laboratories KDB 644545 D03 Guidance for IEEE 802 11ac New Rules KDB 789033 D02 General U-NII Test Procedures New Rules V01 KDB 926956 D01 U-NII Transition Plan P2230006-02_UNII3_Rev 2.0 Page 3 of 63 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 November 29, 2022 John Michalowicz Original Document 2.0 May 9, 2023 John Michalowicz Updated the Test Summary Table P2230006-02_UNII3_Rev 2.0 Page 4 of 63 Table of Contents Description Page Standard Test Conditions Engineering Practices ............................................................................... 7 Occupied Bandwidth ......................................................................................................................... 10 Output Power .................................................................................................................................... 26 Power Spectral Density ..................................................................................................................... 30 Unwanted Emissions that fall Outside of the Restricted Bands ........................................................ 37 Radiated Spurious Emissions ........................................................................................................... 41 A/C Powerline Conducted Emission ................................................................................................. 59 Test Equipment Utilized .................................................................................................................... 61 Measurement Uncertainty ................................................................................................................. 62 P2230006-02_UNII3_Rev 2.0 Page 5 of 63 ANAB Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2017. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to the joint ISO-ILAC-IAF Communiqué dated January 2009). The tests results contained within this test report all fall within our scope of accreditation. Please refer to http://www.compliancetesting.com/labscope.html for current scope of accreditation. FCC Site Reg. #349717 IC Site Reg. #2044A-2 P2230006-02_UNII3_Rev 2.0 Page 6 of 63 The applicant has been cautioned as to the following 15.21 - Information to User The user’s manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.27(a) - Special Accessories Equipment marked to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer without an additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be use…

Text truncated - open the document above for the full version.

Test Setup Photos