2ADAL-32301APERFORMANCE MONITORING EQUIPMENT

INTRODUCTION 3 USER INTERFACE SYSTEM COMPONENTS DATA INTERACTION 5 Start Enters OpenField environment without creating or loading an activity. Use this to assign/map monitors to athletes. New Activity Creates a new activity without starting a period. Do this if you want to prepare for a new activity, and have time before it actually starts. Hot Start Creates a new activity and starts recording data. Use this if you need to start your activity immediately. Full Sync Sends all changed/modified data to the cloud. This should be done at the conclusion of each day. Fast Sync Sends key information up to create reports on the cloud. USER INTERFACE SYSTEM COMPONENTS DATA INTERACTION 5 USER INTERFACE SYSTEM COMPONENTS DATA INTERACTION 5 Timeline Green bar depicts entire activity. Blue bars depict duration of each period or section of your session. When you select an activity or period it will highlight orange You are able to zoom in/out on your activity Controls to the bottom right allow creation of periods and easy navigation. Controls on the bottom middle of the timeline allow are the zero settings. You can choose to have your data start from zero at the start of the entire activity (A), from the start of the currently selected period (P), or for a user selected time interval (I). You can freely change between these modes without affecting your data. Data View Made up of a number of individual data elements called widgets. A widget can be: a tactical view of the players moving on the field, table of data parameters, bar graph. With all widgets you can choose your own parameters and filtering to show exactly what you want. Athletes panel Used to interact with the members of your team and set up. USER INTERFACE SYSTEM COMPONENTS DATA INTERACTION 5 SETTING UP OPENFIELD 6 PRIOR TO INSTALLING OPENFIELD ON COMPUTER Logging in/out Go to your OpenField cloud web address and enter your user name and password. Check account details Before setting up your athletes and band settings, click on ‘Settings’ then ‘My Account’. Ensure speed, distance, date format, weight and height measurements are correct to your region. These will be important when bulk importing athletes and viewing your data. 7 Check team settings To personalize your team settings, click on ‘Settings’ then ‘Teams’. Add your Name, Abbreviation, Sport, Velocity Dwell Time, Acceleration Dwell Time, Heart Rate Dwell Time, PlayerLoad Dwell Time, RHIE Effort Count, RHIE Effort Recovery, Velocity RHIE Bands, Acceleration RHIE Bands. You can also choose your colors and upload your logo. 8 Adding athletes When in the cloud, you can add athletes by going to ‘Settings’, then ‘Athletes’. To bulk import athletes, click ‘Import CSV’, then ‘Download Template’. Open the downloaded template and fill in the fields listed in the cells. Leave the ‘Device’ field blank. Before finishing, save the template. 9 When filling in template fields, all jersey numbers must be unique. eg. If you have a number 75 on offense and defence, use ‘75D’ for your defensive player. Go back to OpenField and find your saved template under ‘Choose File’ on the ‘Import CSV’ page. To add an athlete individually, click ‘Add Athlete’ on the ‘Athletes’ page. Fill out the athlete information fields. If a position for an athlete doesn’t appear, click ‘Settings’ then ‘Positions’ to add another one. 10 You can choose from a pre-populated list of positions or click ‘Add New’ if it is not listed. Enter ‘Height’ and ‘Weight’, then choose ‘Date of Birth’ from calendar. Click the ‘upload’ icon next to the image holder to upload a photo. The software accepts JPG, PNG and GIF up to 1MB in size. Don’t forget to save your changes. 11 Setting your bands Set your bands by clicking clicking ‘Settings’, then ‘Bands’. You can set bands globally (all athletes the same) or individually (per athlete or per position). Global band settings From the dropdown menu, choose which bands you want to set. Now set the lower and upper thresholds in the band settings below the dropdown menu. Once entered in an upper threshold, use the tab key on your keyboard to quickly navigate to the next bands upper limit setting. Once you have set these bands select “Apply to Selected Athletes”. 12 Once you’ve entered the upper threshold, hit the Tab key and you will automatically be taken to the next band’s upper threshold. Individual band settings Use the search filter in the top left corner of the screen to find either a single athlete or positional group. Once you have filtered the athlete/positional group, change the bands as above and select ‘Apply to Selected Athletes’. You can also ticket individual boxes. 13 INSTALLING OPENFIELD ON COMPUTER OpenField console is your link to the cloud. You need to install it in order to use the cloud. RUNNING THE INSTALLER - USER NAME AND DATABASE NAME Run the OpenField installer. Click ‘Next’ and accept the terms and conditions. Click ‘Next’ again through the installation process. You will be prompted to enter a Database, User Name and Region. Your Database and User Name will be the cloud user name provided by your Catapult representative. Click ‘Next’, create a desktop icon and click ‘Install’ to finish the installation. 14 You will see a prompt to install drivers if this is your first time installing. Click ‘OK’ to install. Depending on security, prompts may appear asking for you to allow access through your firewall. Click ‘Allow Access’ Click ‘Finish’ to launch OpenField console. 15 You will see a prompt to install drivers if this is your first time installing. Click ‘OK’ to install. Depending on security, prompts may appear asking for you to allow access through your firewall. Click ‘Allow Access’ Click ‘Finish’ to launch OpenField console. 15 INITIAL SYNC ON OPENFIELD CONSOLE The first time you open the console, you will need to sync with the cloud. This will sync all your settings and athletes. The status screen will show the progress of the sync. Do not close OpenField until it is comp…

Text truncated - open the document above for the full version.

To finish, click on your name in the top right corner and change the ‘Configuration’ settings to the venue you just added. To change the field/venue for one activity only, right click on the session, then ‘Edit’ and change venue. 21 RUNNING A SESSION 22 ASSIGNING MONITORS TO AN ATHLETE Prior to running a real-time session, it’s important each monitor is assigned to an athlete. The ID is found on the back of the monitor. To assign monitors to athletes, click on ‘Settings’ in the top left corner, then ‘Devices’ STARTING A REAL-TIME SESSION To run a real-time session, select ‘New Activity’ from the main title menu. Your activity will be created in the timeline. Right click and select ‘Edit’ to give the session a name. 23 Click the Play button to in the top right corner to start receiving data. The stream will change pattern when data is being received. Double-click on ‘Active Players’ to show all athletes. By selecting ‘all’ and ‘+period’, all athletes are added to the PIP. 24 Right click on the period to edit the period name on the fly. To stop all live periods, click the ‘Stop ALL live periods’ button. To add a live period, click the ‘Add live period’ button. 25 Creating and modifying widgets OpenField comes with pre-built dashboards to track a real-time session, but you can create your own. This can be done by simply clicking the ‘+’ button to create a new dashboard. Then, by right clicking in the white space of the dashboard, select ‘New Widget’ and the design you wish to use. Click and drag from the bottom right corner to re-size the widget. The parameters and title can be altered by clicking the ‘Settings’ icon. 27 Parameters that you wish to view can be deleted or added from the drop down list on the left, or by searching. Click ‘Build Query’ when done. Finishing a real-time session To finish a real-time session, end all living running periods by clicking the ‘Stop All live periods’ icon. Once the periods have stopped, return to your home page and click ‘Fast Sync’ to sync your live data up to the cloud for immediate reporting and feedback. 28 Reporting using real time It is recommended that monitors are downloaded to the console before generating detailed reports. There are two ways to view your real-time data: 1. Syncing your real-time session to view your data through the cloud. 2. Generating a CTR after finalizing the activity. To do this, right click on the activity and select ‘Finalize Activity’, then ‘Export CTR’. 29 FINISHING A SESSION 30 After you have received your monitors post-session, you will need to download the data and sync with the cloud. The data from the monitors allow calculation of our advanced algorithms to take place and any information missed while running real-time. TRANSFERRING DATA OFF MONITORS Plug in your monitors to the charge case and push each monitor into its slot one at a time. Only connect one charge case to the computer at a time. To view the download and import status of your connected monitors, click ‘Data Transfer’ Once all monitors have downloaded, make sure all charge cases are disconnected from the computer. Return to the main menu and run your desired sync. 31 ADJUSTING PERIODS/ADDING NEW PERIODS Asjusting periods can be done during or after the real-time session. It is highly recommended that any period editing is done on the console before syncing to the cloud. To edit any periods in the last activity you captured from the main title menu, select ‘Last Activity’. To adjust the start or end time of an existing period, simply right click on the period you want to change and select ‘Edit’. To add a new period to a live session that has already finished, right click the activity and select ‘New Period’. Name the period and enter in the start and end time. Now add players to this period generated via ‘Team’, select the athletes you want to add, and then ‘PIP’. 32 REASSIGNING MONITORS If you want to re-assign a monitor to another athlete, click on the ‘Start’ tile on the main menu. From the ‘Activities’ panel, select the session you want to change. Click on ‘Settings’, then ‘Devices’ and re-assign the monitor just for that session. For these changes to take effect in the cloud, right click on ‘Activity’ and select ‘Finalize’. Then return to the main menu and ‘Fast Sync’. 33 REASSIGNING MONITORS If you want to re-assign a monitor to another athlete, click on the ‘Start’ tile on the main menu. From the ‘Activities’ panel, select the session you want to change. Click on ‘Settings’, then ‘Devices’ and re-assign the monitor just for that session. For these changes to take effect in the cloud, right click on ‘Activity’ and select ‘Finalize’. Then return to the main menu and ‘Fast Sync’. 33 THE WEB USER INTERFACE 36 THE WEB USER INTERFACE 36 After you’ve completed transferring your data to the cloud, you can in to your web account and start creating reports. OpenField enables customization of data to let a user make reporting as simple or complex as they choose it to be. COMPONENTS AND FUNCTION OpenField cloud has a simple set-up that enables you to create reports, edit timeline, and filter activities. Editing the timeline is done by right clicking the period or session. Athletes can be added by clicking on the period or activity and adding them in to PIP from Player Banks. Activities can be selected and filtered by clicking the ‘Activity’ arrow on the top left. 37 SETTING UP A WIDGET Widgets can be added by clicking on the tiles and selecting ‘Add New Widget’. Configure the widget’s design. Designs can also be altered after they’re created by clicking on the widgets’ ‘Settings’ icon. Reports can be viewed in full screen by right clicking the title cbar and selecting ‘View Full Screen’ 38 SETTING UP A WIDGET Widgets can be addedby clicking on the tiles and selecting‘AddNew Widget’. Configure the widget’s design.Designs can also be altered after they’re createdby clicking on the widgets’‘Settings’icon. Reports can be viewed in full screenby right click…

Text truncated - open the document above for the full version.

________________________________________________________________ www.emctech.com.au To: Certification Manager - TIMCO Engineering From: EMC Technologies Pty Ltd No of pages: 1 EMC Ref: M140718 Date: 18 May 2015 Subject: FCC & IC approval – FCC ID: 2ADAL-32301A, IC: 12403A-32301A Please find application for FCC & IC approvals uploaded. The EUT is the Optimeye X4 transmitter module (DTS – FCC Part 15.247), installed in the Catapult Sports Performance Monitoring Equipment. EMC Technologies Pty Ltd is acting as agent for Catapult Sports during this product approval. Regards _____________ Donna Lennon Report Secretary EMC Technologies Pty Ltd EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 Email: [email protected]

$SULO, 2015 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ADAL-32301A Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name %ORFN'LDJUDPBlkDia.pdf Operational Description OpDes.pdf Operational Description OpDesAnt.pdf SchematicsSchem.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Igor van de Griendt Chief Operations Officer Igor van de Griendt

FCC ID: 2ADAL-32301A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A1 – External Photos

Optimeye X4 Label Example The label will be laser etched onto the device. Example shown below. X4 Label Here

FCC ID: 2ADAL-32301A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A2 – Internal Photos FCC ID: 2ADAL-32301A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A2 – Internal Photos FCC ID: 2ADAL-32301A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A2 – Internal Photos FCC ID: 2ADAL-32301A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A2 – Internal Photos FCC ID: 2ADAL-32301A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A2 – Internal Photos

Page 1 of 53 SAR Test Report Report Number: M140719X4FR This report is a replacement for the report M140719X4F Test Sample: Catapult Athlete Tracking Transmitter Model Number: Optimeye X4 Tested For: Catapult Sports Date of Re-issue: 20 th May 2015 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. 176 Harrick Road Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] Report No. M140719X4FR Page 2 of 53 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. CONTENTS 1.0 GENERAL INFORMATION ..................................................................................................... 3 2.0 DESCRIPTION OF DEVICE .................................................................................................... 4 2.1 Description of Test Sample ................................................................................................. 4 2.2 Test sample Accessories .................................................................................................... 4 2.2.1 Battery Types ....................................................................................................................................... 4 2.3 Test Signal, Frequency and Output Power .......................................................................... 4 2.4 Battery Status ...................................................................................................................... 5 2.5 Details of Test Laboratory ................................................................................................... 5 2.5.1 Location ............................................................................................................................................... 5 2.5.2 Accreditations ...................................................................................................................................... 5 2.5.3 Environmental Factors ........................................................................................................................ 6 2.6 Calibration and Validation Procedures and Data ................................................................. 6 2.6.1 System Check Results @ 2450 MHz ................................................................................................... 6 2.6.2 Deviation from reference validation values ....................................................................................... 6 2.6.3 Liquid Temperature and Humidity ...................................................................................................... 7 3.0 SAR MEASUREMENT PROCEDURE USING DASY5 ............................................................ 7 4.0 MEASUREMENT UNCERTAINTY ........................................................................................... 8 5.0 EQUIPMENT LIST AND CALIBRATION DETAILS ............................................................... 11 6.0 SAR TEST METHOD ............................................................................................................. 12 6.1 Description of the Test Position (Body Worn) .................................................................... 12 6.1.1 “Body Worn Position” ...................................................................................................................... 12 6.2 List of All Test Cases (Antenna In/Out, Test Frequencies, User Modes) ........................... 12 6.3 FCC RF Exposure Limits for Occupational/ Controlled Exposure ...................................... 12 6.4 FCC RF Exposure Limits for Un-controlled/Non–occupational .......................................... 12 7.0 SAR MEASUREMENT RESULTS ......................................................................................... 13 8.0 COMPLIANCE STATEMENT ................................................................................................ 14 8.0 COMPLIANCE STATEMENT ................................................................................................ 14 APPENDIX A1 Test Sample Photographs ....................................................................................... 15 APPENDIX A2 Test Setup Photographs .......................................................................................... 16 APPENDIX A3 Test Setup Photographs .......................................................................................... 17 APPENDIX B Plots Of The SAR Measurements .............................................................................. 18 APPENDIX C DESCRIPTION OF SAR MEASUREMENT SYSTEM .................................................. 25 Probe Positioning System ........................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 22 EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) Test Sample: Catapult Sports Performance Monitoring Equipment Model: Optimeye X4 Transmitter Module FCC ID: 2ADAL-32301A Report Number: M140718-7FCC Rev 1.0 Tested for: Catapult Sports Issue Date: 1 June 2015 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection eports. This document shall not be reproduced except in full. EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 Email: [email protected] FCC ID: 2ADAL-32301A Report No.: M140718-7FCC Rev 1.0 Page 2 of 22 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) EMC Technologies Report No.: M140718-7FCC REV 1.0 Issue Date: 1 June 2015 Contents 1.0 INTRODUCTION ........................................................................................... 4 2.0 GENERAL INFORMATION .......................................................................... 5 3.0 ANTENNA REQUIREMENT (§15.203) ........................................................ 7 4.0 CONDUCTED EMISSIONS (§15.207) .......................................................... 7 5.0 DTS 6 dB BANDWIDTH (§15.247 (a)(2)) ..................................................... 7 6.0 PEAK OUTPUT POWER (§15.247 (b)(3)) ................................................... 8 7.0 BAND-EDGE EMISSIONS MEASUREMENTS ........................................... 8 8.0 SPURIOUS EMISSION MEASUREMENTS (§15.247 (d)) ........................... 10 9.0 POWER SPECTRAL DENSITY (§15.247 (d)) ............................................. 19 10.0 RADIO FREQUENCY EXPOSURE (HAZARD) ......................................... 19 11.0 COMPLIANCE STATEMENT ..................................................................... 20 12.0 UNCERTAINTIES ....................................................................................... 21 APPENDIX A: MEASUREMENT INSTRUMENT DETAILS .............................. 22 FCC ID: 2ADAL-32301A Report No.: M140718-7FCC Rev 1.0 Page 3 of 22 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) Report Number: M140718-7FCC REV 1.0 Test Sample: Catapult Sports Performance Monitoring Equipment Model: Optimeye X4 Transmitter Module Equipment Type: Intentional Radiator (Transceiver) Manufacturer: Catapult Sports Address: 1 Aurora Lane, Docklands VIC 3008 Phone: +61 3 9095 8410 Fax: Contact: Igor van de Griendt Email: [email protected] Test Standards: FCC Part 15 – Radio Frequency Devices FCC Part 15 Subpart C - Intentional Radiators Section 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.4 – 2009 KDB 558074 v03r02 - Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247 RSS-210 Issue 8, Licence-Exempt Radio Apparatus Category 1 Equipment RSS-Gen Issue 4, General Requirements for Compliance of Radio Apparatus Test Dates: 20 th , 21 st July 2014 Test Engineer: Mahan Ghassempouri Attestation: I hereby certify that the device(s) described herein were tested as described in this report and that the data included is that which was obtained during such testing. Authorised Signatory: Chris Zombolas EMC Technologies Pty Ltd FCC ID: 2ADAL-32301A Report No.: M140718-7FCC Rev 1.0 Page 4 of 22 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) & IC RSS-210 1.0 INTRODUCTION EMI testing was performed on the Catapult Sports performance monitoring equipment, Model: Optimeye X4. Test results and procedures were performed in accordance with the following Federal Communications Commission (FCC) standards/regulations: 47 CFR, Part 15, Subpart C: Rules for intentional radiators (particularly section 15.247) Section 15.203: Antenna requirements Section 15.205: Restricted bands of operation Se…

Text truncated - open the document above for the full version.

FCC ID: 2ADAL-32302A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A3 – Test Setup Photos FCC ID: 2ADAL-32302A IC: 12403A-32301A ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A3 – Test Setup Photos