Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Applicant as U.S. Agent Letter of Attestation Date: 2026/03/24 To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2ADHKBZ6602 Microchip Technology Inc. (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: Microchip Technology Inc. Contact Person: HRUSHIKESH VASUKI Address: 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199 Tel.: 1 480-437-0762 Email: [email protected] FCC FRN: 0001596279 Sincerely yours, Signature Printed Name: HRUSHIKESH VASUKI Title: Vice President, Business Unit General Manager, Wireless Solutions Group Email: [email protected]
Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2026/3/24 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2ADHKBZ6602 [Microchip Technology Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: HRUSHIKESH VASUKI Title: Vice President, Business Unit General Manager, Wireless Solutions Group Address: 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199 Tel.: 1 480-437-0762 Email: [email protected]
Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2026/3/24 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2ADHKBZ6602 [Microchip Technology Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: HRUSHIKESH VASUKI Title: Vice President, Business Unit General Manager, Wireless Solutions Group Address: 2355 West Chandler Blvd. Chandler, Arizona, USA 85224-6199 Tel.: 1 480-437-0762 Email: [email protected]
Page 1 of 1 Authority to Act as Agent Date: 2026/3/27 TUV Rheinland of North America 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 USA To Whom It May Concern: I appoint __________TUV Taiwan_______ to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Microchip Technology Inc. / 2355 West Chandler Blvd. Chandler, Arizona 85224-6199, United States. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 2026/3/27 Agreement is valid for 12 months from the above date. By: __________________________ HRUSHIKESH VASUKI (Signature) (Print name) Vice President, Business Unit General Manager, Wireless Solutions Group 480-792-0762 (Title) (Telephone) On behalf of: Microchip Technology Inc. (Company Name)
Error! Unknown document property name. Number: Error! Unknown document property name.44715 Revision: 1 Effective date: Sep 12, 2022 Author: Error! Unknown document property name. Owner: Error! Unknown document property name. MS-0044715 Page 1 of 1 Revision 1 Date: 2026/03/24 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2ADHKBZ6602 Pursuant to FCC 47 CFR 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent User’s Manual*** Short Term Permanent Part List Microchip Technology Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _____________________ HRUSHIKESH VASUKI/ Vice President, Business Unit General Manager, Wireless Solutions Group_ (Signature) (Print name/Title) Tel: 480-792-0762 Email: [email protected]
27-Mar-26 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Certification and Engineering Bureau ISED Canada 3701 Carling Avenue (Building 94) Ottawa, Ontario K2H 8S2 FCC ID: 2ADHKBZ6602 IC: 20266- BZ6602 Models: PIC32WM-BZ6602CE, PIC32WM-BZ6602CC HVIN: PIC32WM-BZ6602CE, PIC32WM-BZ6602CC Declaration on Similarity We herewith confirm that for the models listed above the RF Transmitter Module is Electrically Identical. The model differences are as below description. Main Model Series Model Describe the differences between the main model and the series model PIC32WM-BZ6602CE PIC32WM-BZ6602CC Both models are using the same chip antenna (PN: ANT1608LL14R2400A) and have the same hardware layout design, the difference is having the ECC chip or not. CC is U.FL variant WITH ECC chip ; CE is U.FL WITHOUT ECC chip. ___________________ HRUSHIKESH VASUKI/ Vice President, Business Unit General Manager, WSG (Signature) (Printed/Title)
Applicant/Grantee Microchip Technology Inc. FCC ID: 2ADHKBZ6602 Section 15.212 Modular Transmitters / X Request for Modular Approval Request for Limited Modular Approval Requirements Device Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements must have the radio frequency circuitry must be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. The module has its own RF shielding.” Shield Can is employed on the board structure, please see exhibition External Photo, the emission measurement was conducted without further shielding added. Y 2 The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over-modulation. All modulation and data input(s) are buffered.” The EUT has buffered data inputs, it is integrated on the RF chip Y 3 The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Output power is controlled by the RF Chip and de-coupled from supply voltage variations. Frequencies are determined by Crystal Y 4 The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The Equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. The antenna is part of the module Y 5 The module shall be tested for compliance with the applicable standard in a stand- alone configuration, i.e. the module must not be inside another device during testing. The modular transmitter was tested in a stand-alone configuration via a UART Interface. Y 6 The module shall comply with the Category I equipment labelling requirements. In the exhibition OEM manual, there are Instructions given to the OEM on how to label the end product. Y 7 The modular transmitter complies with all specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer will provide adequate instructions along with the module to explain any such requirements. A copy of these instructions is included in this application for equipment authorization: Instructions in User Manual Y 8a Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). Please refer the Maximum Permissible Exposure Information. Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. Signature Name/Title: HRUSHIKESH VASUKI / Vice President, Business Unit General Manager, Wireless Solutions Group Company Name: Microchip Technology Inc. Date: 2026/3/24
Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN265VA2 001 Auftrags-Nr.: Order no.: 48302355 Seite 1 von 11 Page 1 of 11 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-03-05 Auftraggeber: Client: Microchip Technology Inc. 2355 West Chandler Blvd. Chandler, Arizona 85224-6199, United States Prüfgegenstand: Test item: Wireless MCU Module with Bluetooth® Low Energy 6.0 qualified, IEEE® 802.15.4 Bezeichnung / Typ-Nr.: Identification / Type no.: PIC32WM-BZ6602CE, PIC32WM-BZ6602CC Auftrags-Inhalt: Order content: FCC Certification Prüfgrundlage: Test specification: IEEE Std C95.1 47 CFR §2.1091 47 CFR §1.1310 KDB 447498 D04 Wareneingangsdatum: Date of sample receipt: 2026-03-18 Prüfmuster-Nr.: Test sample no: A004228028-002 A004228028-003 Prüfzeitraum: Testing period: 2026-03-25 - 2026-04-27 Ort der Prüfung: Place of testing: TÜV Rheinland Taiwan Ltd. New Taipei Branch Prüflaboratorium: Testing laboratory: TÜV Rheinland Taiwan Ltd. Taipei Testing Laboratories Prüfergebnis*: Test result*: Pass zusammengestellt von: compiled by: genehmigt von: authorized by: Datum: Date: 2026-05-06 Ausstellungsdatum: Issue date: 2026-05-06 Stellung / Position: Anderson Chiu Senior Project Manager Stellung / Position: Pei-Shan Tsai Section Manager Sonstiges / Other: The outpout power results are referred to reprt no.: CN2646ET 001 and CN26IK0M 001. Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN265VA2 001 Seite 2 von 11 Page 2 of 11 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren In…
Text truncated - open the document above for the full version.
Description : 1608 2.4G Chip Antenna PART NUMBER : ANT1608LL14R2400A In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide HeadquartersPulse/Larsen AntennasEurope HeadquartersPulse (Suzhou) Wireless Products Co, Inc. 15255 Innovation Drive #100Pulse GmbH & Do, KG99 HuoJuRoad(#29 Bldg,4 th Phase San Diego, CA 92128Vancouver, WA 98683Zeppelinstrasse15Suzhou New District USAUSAHerrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 18110 SE 34 th St Bldg2 Suite 250 Features: Applications: All dimensions are in mm / inches •Size : 1.6x0.8x0.4 mm •Working Frequency : 2.4~2.5GHz •Omni-directional Radiation •Tape & reel automatic mounting •Reflow process compatible •RoHScompliant •2.4GHz WiFidevice •Bluetooth device •Zigbeedevice •ISM band equipment 1 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description : 1608 2.4G Chip Antenna PART NUMBER : ANT1608LL14R2400A 2 ELECTRICAL SPECIFICATIONS MECHANICALDRAWING Working Frequency2.4 ~ 2.484 GHz Bandwidth150 MHz(Typ.) ReturnLoss6.0 dB Max PolarizationLinear Azimuth BeamwidthOmni-directional Peak Gain2.0 dBi(Typ.) Impedance50 Ω Operating Temperature-40~105 °C Maximum Power1 W TerminationAg (Environmentally-Friendly Leadless) Peak Reflow Temperature260 °C , 5sec. NOTE 1. The specification is defined on Pulse evaluation board Dimension L(mm)1.60 ± 0.15 W(mm)0.80 ± 0.15 T(mm)0.40 (Max.) A(mm)0.25 ± 0.15 B(mm)0.25 ± 0.15 C(mm)0.30 ± 0.15 D(mm)0.70 ± 0.15 E(mm)0.07 ± 0.07 F(mm)0.20 ± 0.10 G(mm)0.06 ± 0.05 H(mm)0.05 ± 0.05 I(mm)0.10 ± 0.05 Terminal nameFunction S1Soldering Pad S2Feeding Pad S2S1 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description : 1608 2.4G Chip Antenna PART NUMBER : ANT1608LL14R2400A 3 REFERENCE DESIGN OF EVALUATION BOARD(SCENARIO 1) ◇SCENARIO 1 Outlookand dimension of evaluation board In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description : 1608 2.4G Chip Antenna PART NUMBER : ANT1608LL14R2400A 4 REFERENCE DESIGN OF EVALUATION BOARD(SCENARIO 1) Details of clearance In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description : 1608 2.4G Chip Antenna PART NUMBER : ANT1608LL14R2400A 5 REFERENCE DESIGN OF EVALUATION BOARD(SCENARIO 1) Footprint In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description : 1608 2.4G Chip Antenna PART NUMBER : ANT1608LL14R2400A 6 ELECTRICAL PERFORMANCES (SCENARIO 1) Return loss Z X Y Evaluation board and XYZ direction Radiation pattern Max Gain = 2.03dBi Efficiency = -2.08dB, 61.88% In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does …
Text truncated - open the document above for the full version.
Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26IK0M 001 Auftrags-Nr.: Order no.: 48302355 Seite 1 von 32 Page 1 of 32 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-03-05 Auftraggeber: Client: Microchip Technology Inc. 2355 West Chandler Blvd. Chandler, Arizona 85224-6199, United States Prüfgegenstand: Test item: Wireless MCU Module with Bluetooth® Low Energy 6.0 qualified, IEEE® 802.15.4 Bezeichnung / Typ-Nr.: Identification / Type no.: PIC32WM-BZ6602CE, PIC32WM-BZ6602CC Auftrags-Inhalt: Order content: FCC Part 15C Test report (IEEE® 802.15.4) Prüfgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247 Wareneingangsdatum: Date of sample receipt: 2026-03-18 Prüfmuster-Nr.: Test sample no: A004228028-002 A004228028-003 Prüfzeitraum: Testing period: 2026-03-25 - 2026-04-27 Ort der Prüfung: Place of testing: TÜV Rheinland Taiwan Ltd. New Taipei Branch Prüflaboratorium: Testing laboratory: TÜV Rheinland Taiwan Ltd. Taipei Testing Laboratories Prüfergebnis*: Test result*: Pass zusammengestellt von: compiled by: genehmigt von: authorized by: Datum: Date: 2026-05-06 Ausstellungsdatum: Issue date: 2026-05-06 Stellung / Position: Anderson Chiu Senior Project Manager Stellung / Position: Pei-Shan Tsai Section Manager Sonstiges / Other: This EUT includes the secondary source. This change involves the substitution of alternate parts for certain capacitors, inductors, ferrite beads, and the 16 MHz crystal. The component type, nominal value, and original function remain unchanged; the only differences are the part numbers and supply sources. Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26IK0M 001 Seite 2 von 32 Page 2 of 32 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 …
Text truncated - open the document above for the full version.
Prüfbericht - Nr.: Test Report No. CN26IK0M 001 Seite B1 von B25 Page B1 of B25 Appendix B: Test Results of Radiated Spurious Emissions & Mains Conducted Emission Test Primary Source (ECC…
Text truncated - open the document above for the full version.
2355 West Chandler Blvd. · CHANDLER, Arizona, 85224-6199 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 10.20 mW |
| 2 | 15C | 2.40 GHz - 2.48 GHz | 10.70 mW |