Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product described within the application filing documents. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna used with this device must only be the antenna that was tested in preparation of this application. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A 20 cm separation distance between the module and oersons must be maintained in the final installation.