2ADKN-425164x6 INCH WAX WAVY EDGE CANDLE TUNES(TM) BLUETOOTH CANDLE

CANDLETUNES™ instructions CHARGE THE CANDLE 1. Make sure the Candletunes™ power switch in the ( Ο ) position. 2. Connect the USB plug to Candletunes™. 3. Connect the USB plug to the adaptor plug provided then connect it to an electrical outlet. 4. If an electrical outlet is unavailable, connect the device with a USB port. 5. Connect Candletunes™ to a power source to start the charge cycle and the indicator light will be red while charging. When the candle is fully charged the red light will turn off. 6. Disconnect the USB plug from the candle for use. Music & Light ON Candle Off Candle Light ON USB Plug Connect CANDLE USE 1. Candletunes™ can be paired with any device with bluetooth wireless technology. To start, put your device in “pairing” mode to connect it to Candletunes™. 2. Slide the Candletunes™ power switch to ( ) position. The yellow candle light will turn on and a blue light will blink near the Candletunes™ port. 3. Use your device to “find” Candletunes™ candle. 4. Candletunes™ will “beep” when successfully paired. 5. Play music on your device. Candletunes™ volume is controlled by your device. The blue light will flicker to show the candle is playing music. 6. The maximum working range between your candle and the device is 5 meters (16.4 feet). 7. Slide power switch to ( | ) position for candle light only. CARE 1. Keep away from water or damp locations. 2. Turn off when not in use to save battery life. • This device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device. • DO NOT expose this device to fire or water. • Use of incompatible chargers may present a risk of fire, explosion, or other hazard that can cause battery to overheat, rupture, leak, or explode, resulting in personal injury and/or property damage. • Dispose of this device in accordance with the laws and regulations in your area governing disposal of rechargeable battery cell types. • Never use this device or its charger if it is damaged. • Never touch damaged or leaking batteries - this could result in burn injuries or cause serious internal injuries if swallowed. Obtain medical attention immediately if this occurs. • Only use the charger indoors. • Use this device and charger for their intended purposes only. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. This device complies with Industry Canada license - exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Adaptor Plug CANDLETUNES™ PC CANDLETUNES™ bottom view USB Plug KEEP THIS INSTRUCTION SHEET FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION. Musique et lumière ALLUMÉES Chandelle ÉTEINTE Lumière de chandelle ALLUMÉE Connexion de fiche USB Fiche d’ adaptation CANDLETUNES™ PC Vue de dessous de CANDLETUNES™ Fiche USB Fiche d’instructions pour CANDLETUNES™ CHARGER LA CHANDELLE 1. Assurez-vous que l’interrupteur d’alimentation de Candletunes™ est en position ( O ). 2. Connectez la fiche USB à Candletunes™. 3. Connectez la fiche USB à la fiche d’adaptation fournie, puis branchez-la dans une prise de courant. 4. Si aucune prise de courant n’est disponible, connectez l’appareil à un port USB. 5. Connectez Candletunes™ à une source d’alimentation électrique pour entamer le cycle de charge; le voyant lumineux sera rouge pendant la charge. Une fois que la chandelle est complètement chargée, le voyant rouge s’éteindra. 6. Déconnectez l a fiche USB de la chandelle pour utiliser la chandelle. UTILISATION DE LA CHANDELLE 1. Candletunes™ peut être appariée à tout autre appareil à technologie Bluetooth sans fil. Pour commencer, mettez votre appareil en mode «pairage» pour le connecter à Candletunes™. 2. Glissez l’interrupteur Candletunes™ en position ( ). La lu miè re jaune de la chandelle s’a llu mera et un voyant bleu clignotera à proxim it é du port Candletunes™. 3. Utilisez votre appareil pour «…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version 1 Reference No.: 140926N013 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version 1 Reference No.: 140926N013 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version 1 Reference No.: 140926N013 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version 1 Reference No.: 140926N013

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Reference No.: 140926N013 PHOTOGRAPHS OF THE EUT ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Reference No.: 140926N013

4x6"WAX WAVY EDGE CANDLE TUNES(TM)BLUETOOTH ZHEJIANG LONGSUNNY INDUSTRY CO.,LTD ZHEJIANG LONGSUNNY INDUSTRY CO.,LTD Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 27 Report Version 1 Test Report No.: RF140926N013 TEST REPORT Applicant Address NO.395. NORTH QIHANG ROAD BINHAI INDUSTRY,NINGBO,CHINA Manufacturer or Supplier Address NO.395. NORTH QIHANG ROAD BINHAI INDUSTRY,NINGBO,CHINA Product CANDLE Brand Name N/A Model 42516 Additional Model & Model Difference N/A Date of tests Sep. 26 ~ Oct. 20, 2014 The submitted sample of the above equipment has been tested according to the requirements of the following standards: FCC Part 15, Subpart C, Section 15.249 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Yuqiang Yin Project Engineer / EMC Department Approved by Glyn He Supervisor / EMC Department Date: Oct. 22, 2014 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 27 Report Version 1 Test Report No.: RF140926N013 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS .................................................................................................... 4 2 MEASUREMENT UNCERTAINTY ................................................................................................. 4 3 GENERAL INFORMATION ............................................................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ............................................................................................. 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 7 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 7 4 TEST TYPES AND RESULTS ........................................................................................................ 8 4.1 CONDUCTED EMISSION MEASUREMENT ............................................................................. 8 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................................. 8 4.1.2 TEST INSTRUMENTS ....................................................................................................... 8 4.1.3 TEST PROCEDURES ....................................................................................................... 9 4.1.4 DEVIATION FROM TEST STANDARD ............................................................................. 9 4.1.5 TEST SETUP ................................................................................................................... 10 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 10 4.1.7 TEST RESULTS ............................................................................................................... 11 4.2 RADIATED EMISSION MEASUREMENT ................................................................................ 13 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 13 4.2.2 TEST INSTRUMENTS ..................................................................................................... 14 4.2.3 TEST PROCEDURES ..................................................................................................... 15 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 16 4.2.5 TEST SETUP ................................................................................................................... 16 4.2.6 EUT OPERATING CONDITIONS .................................................................................... 16 4.2.7 TEST RESULTS .............................................................................................................. 17 4.3 20DB BANDWIDTH MEASUREMENT...................................................................................... 22 4.3.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT .............................................................. 22 4.3.2 TEST INSTRUMENTS ...................…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Reference No.: 140926N013 SET-UP FOR CONDUCTED EMISSION TEST Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Reference No.: 140926N013 SET-UP FOR RADIATED EMISSION TEST Frequency Range< 30MHz~1GHz > Frequency Range< Above 1GHz >