2ADM5-EP-0622BT TWS POWERBANK AST

Thank you for purchasing the Power True Wireless Earbuds. This manual provides more information about the wireless earbuds, please read the instructions before using. INSTRUCTION MANUAL Pair the wireless earbuds with your mobile device 1. Keep the distance between the earbuds and mobile device within 32.8 feet. 2. De-activate the Bluetooth function on your mobile device. 3. Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. The Left earbud has indicator blinking alternatively in Red and Blue. The Right earbud will be blinking in Blue slowly when auto pairing is done successfully on L/R earbuds.. 4. Activate the Bluetooth function on your mobile device and select “POWER TWS” from the list shown. 5. After pairing is successful, both earbuds will start blinking slowly in blue. *Attention: If the auto pairing is not successful, manual pairing between earbuds is essential by following below procedures: 1. Make sure the earbuds are charged. 2. De-activate the Bluetooth function on your mobile device. (if you had been paired the earbuds to some other mobile device(s) nearby, please sure to de-activate those device(s) too). 3. Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. (Keep the Bluetooth function off on your mobile device before this operation.) 4. Activate the Bluetooth function on your mobile device and select “POWER TWS” from the list shown. 5. After pairing successfully, both earbuds will start blinking slowly in blue. Reconnect the wireless earbuds to your mobile device Disconnect the wireless earbuds from your mobile device Power off the wireless earbuds; or Switch off the Bluetooth on your mobile phone; or Leave the earbuds 60ft away from your mobile phone or further. Answer / Reject a call When receive a call, press the On/Off Button once ( on either earbud) to accept the call, or answer the call normally via your moblie phone. Press and hold 2 seconds to reject it. End a call To end the call, just press On/Off button at any side of earbud with Beep sound to end it. Functions Pause / Play Music: Short Press on On/OFF Button Go back to previous song: Press Left On/Off Button for 1 second. Advance to next song: Press Right On/Off Button for 1 second. Volume up: Double click Right On/Off button to increase Volume down: Double click Left On/Off to reduce Recharge Charging Case Charging Other Device With Charging Case 1. Open the charging case cover. 2. Insert the Dual Earbuds into the charging case. 3. The earbuds will start the charge automatically. 4. LED indicator light of the charging case will be turned to Blue when charging your earbuds. 5. Once fully charged, the LED will be off. Charging your Earbuds If the wireless earbuds cannot be paired with your device, please try the following: Ensure that your earbuds are in pairing mode or reconnection mode Ensure that Bluetooth search function of your mobile device is activated. If the wireless earbuds will not turn on: Make sure the earbuds are fully charged. Can I change the battery for the earbuds? The wireless earbuds use a built-in non-detachable battery which cannot be removed. If the wireless earbuds cannot be recharged: If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. FAQ Product OverviewPower On/Off Package Contents -The input voltage to the product is 5V 1A. -In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. -Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F. - Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw into fire. -Switch off the product after use. -Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product. -In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. Safety instructions for the lithium battery and charging the product Power True Wireless Earbuds x 1 pair Charging Case x 1 Micro USB Charging Cable x 1 Instruction Manual x 1 Power On Press and hold down the On/Off Button of earbuds for 3 seconds and the LED will flash. Power Off Press and hold down the On/Off Button of earbuds for 4 seconds and the LED will turn off. When powered on, the wireless earbuds will automatically connect with the last successfully paired device. Specifications Instruction ManualMicro USB Charging Cable FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off…

Text truncated - open the document above for the full version.

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] Date: 07/22/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that： Product Name: BT TWS POWERBANK AST Model No: EP-0622 FCC ID: 2ADM5-EP-0622 For BT Mode: BLE are disable by software For Below are activated: Bluetooth BDR(GFSK) , EDR(π/4‐DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturer’s responsibility to provide the radio configurations to ensure compliance with Commission’s rules. Sincerely Yours, Signature: Printed Name: Akshay P Butani Tiltle: Vice President

BlockDiagram SPEAKER DAC OSCILLATOR FLASH ANT XTAL 24M AC6969 BT

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] FCC ID Cover Letter We, Zeeva International Limited hereby declare that we have a product named as BT TWS PRO AST （FCC ID: 2ADM5 -EP-0622 ; Model: EP-0622）was tested by BACL ,which has left earbud and right earbud. we would like to declare that the product has two units which are electrically identical.We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature: Printed Name: Akshay P Butani Title: Vice President Date: 07/22/2020

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] Date: 07/22/2020 Product Similarity Declaration To Whom It May Concern, We, Zeeva International Limited hereby declare that we have a product named asBT TWS POWERBANK AST (Model No: EP-0622) FCC ID: 2ADM5-EP-0622 was tested by BACL, meanwhile, for our marketing purpose, we would like to list a series models on reports and certificate, all the models are identical schematics, except for the differences as below, 1. Only difference model No. and Description with different product name, UPC#, SKU#. Model No. Description UPC# SKU# EP-0622 BT TWS POWERBANK AST 192234062920 - 3358520 EP-0625 BT TWS CONQUEST SPORT AST 192234062937 3358330 No other changes are made to them. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature: Printed Name:Akshay P Butani Title: Vice President

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] FCC Authorization 07/14/2020 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B

              !"  # $  %& $   '()*+,+)-)*.'()*+,+*+/0)- , ' 12%34  563     FCC ID Cover Letter        4%24 272 8  8 9   "":   ;22   <2 = 3 ;    ""#  > ?$:@4  )//):0 A 2 8  "": 4   <2 B2  8   2C2 4 % 2 8   "": 49  3 #8   4 C 2   2 2 ?"":'+;:=*,@,-++A 49  3 "": 4    2 9 82 B2   23  2 2 4 ' ;3 2 8?;A'   29 8 2  2 41   2 8  2  B2  88   4   2 8 8  423 3 9  ?A'9 2    8  9   2 9   9%2  29 8  9   8 "":   4  8 9   3    "  2 ˖ 2  4 2 9  8 ;        2C2 4 % 2 8 4  "": 49    %2 8!  8  C2     "":  <2    2     %D  2    ' @  E';12%@    'F @ 2    Date: 07/22/2020

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 1 of 4 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Left Earbud Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 2 of 4 Right Earbud Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 3 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 4 of 4 Charging Box

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 1 of 7 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Left Earbud Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 2 of 7 Antenna Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 3 of 7 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 4 of 7 Right Earbud Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 5 of 7 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 6 of 7 Antenna Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200706830-RF Page 7 of 7 Charging Box

Circuit Description Battery(3.7V)provides energy for the Bluetooth chip(AC6969) ; Crystal oscillator(24MHz) provides the clock signal for the Bluetooth chip. Bluetooth signals get through a matching circuit, and then transmitted to the space through the antenna(2402MHz ‐ 2480MHz). When the product is connected, the product can be in two ‐ way communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.

AC6969 Part No.: A820BP02028-69A2 MCULEDMIC TOUCH 1 VDDIO 2 VBAT 3 LDO_IN/PB5 4 BT_AVDD 5 PB3 6 PB1 7 BT_RF 8 VSSIO 9 BT_OSCI 10 BT_OSCO 11 USBDM 12 USBDP 13 DACR 14 DACL 15 DACVSS 16 MIC U1 Y2 24M C2NC C7 105 C4105 1 2 CB1 0.5uH 1 15 CB2 NC M2 1.2uH DM DP S+ S- 5V+ B- GND 5V- 3. 3V B+ + J3 MIC C5 NC C3100K DP2 RED DP1 BLUE S1 NC R1 2.7R BT_OSCO USBDP DACR USBDM BT_OSCI DACL MI C BT_OSCI BT_OSCO +3. 3V VBAT LDO BT_AVDD LED_B/R P/P/POWER USBDM USBDP DACL DACR DC5V +3.3V VBAT +3.3V LED_B/R P/P/POWER DC5V LDO MIC BT ANT

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong FCC ID: 2ADM5-EP-0622 Report Type: Original Report Product Type: BT TWS POWERBANK AST Re port Number: RSZ200706830-00 Re port Date: 2020-07-22 Reviewed B y: Jimmy Xiao RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200706830-00 FCC Part 15.247 Page 2 of 51 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC§15.247 (i), §1.1307 (b) (1) &§2.1093 – RF EXPOSURE ...................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 11 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 EUT SETUP ................................................................................................................................................................ 12 EMI TEST RECEIVER SETUP ....................................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................................... 12 CORRECTED FACTOR & MARGIN CALCULATION .........................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)