2ADM5-EP-0697FLIP CHARACTER TWS

Pair the wireless earbuds with your mobile device Reconnect the wireless earbuds to your mobile device Disconnect the wireless earbuds from your mobile device Power off the wireless earbuds; or Switch off the Bluetooth on your mobile phone; or Leave the earbuds 60ft away from your mobile phone or further. Answer / Reject a call End a call Functions Charging your Earbuds If the wireless earbuds cannot be paired with your device, please try the following: Ensure that your earbuds are in pairing mode or reconnection mode Ensure that Bluetooth search function of your mobile device is activated. If the wireless earbuds will not turn on: Make sure the earbuds are fully charged. Can I change the battery for the earbuds and the charging case? The wireless earbuds and the charging case use a built-in non-detachable battery which cannot be removed. If the charging case cannot be recharged: If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. FAQ Product OverviewPower On/Off -The input voltage to the product is 5V 1A. -In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. -Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F. - Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw into fire. -Switch off the product after use. -Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product. -In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. Safety instructions for the lithium battery and charging the product When powered on, the wireless earbuds will automatically connect with the last successfully paired device. Specifications FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID2ADM5-EP-0697 Keep all relevant information for future reference Thank you for purchasing the FLIP True Wireless Earbuds. This manual provides more information about the wireless earbuds, please read the instructions before using. INSTRUCTION MANUAL Package Contents FLIP True Wireless Earbuds Portable Charging Case 1. Touch Control Area On/Off, Play/Pause Music Answer/End Call 2. LED Indicator 3. USB Type-C Charging Port 4. Charging LED Indicator 1. Open the charging case cover. 2. Remove the protective stickers between earbuds and charging case. 3. Insert the Earbuds into the charging case. 4. The earbuds will start the charge automatically. 5. LED indicator light of the Earbuds will be turned on when charging. 6. Once fully charged, the LED will be off. Recharge Charging Case NOTE: • You must select a qualified charger from a regular manufacturer. • You must charge the charging case and earbuds if it has been not used for more than 6 months. USB plugUSB Type-C plug 1. Use the USB Type-C charging cable provided with the packaging. 2. Connect the USB Type-C plug to USB Type-C charging port on the charging case, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The LED on the charging case will flash during charging. 4. Once fully charged, the LED will be on. 5. The LED will be on during earbuds is charging and will be off after fully charged. For your safety, please always use appropriate 5V output charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. 1(One) Pair Earbuds 0.82in. x 0.94in. x 0.59in. (2.1cm x 2.4cm x 1.5cm) each 1(One) Portable Charging Case 2.13in. x 2.09in. x 1.77in. (5.4cm x 5.3cm x 4.5cm) 1(One) USB Type-C Charging Cable 11.8in. (30cm) 1(One) Instruction Manual Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China ITEM# EP-0697 When receive a call, press the touch control area once (on either earbud) to accept the call, or answer the call normally via your mobile phone. Press and hold the touch control area 2 seconds to reject it. To end the call, just press the touch control…

Text truncated - open the document above for the full version.

Rev1/26/2023 (ZeevaInternationalLimited) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:08-03-2023 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:(2ADM5-EP-0697) [ZeevaInternationalLimited](“theapplicant”)certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. Sincerely, (Applicantsignature) (KevinTso) Rev1/26/2023 (ZeevaInternationalLimited) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:08-03-2023 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:(2ADM5-EP-0697) [ZeevaInternationalLimited](“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiaries oraffiliates)asanentityproducing“covered” equipment. Sincerely, (Applicantsignature) (KevinTso)

ZeevaInternationalLimited Rev11/20/07 FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2ADM5-EP-0697 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription BlockDiagram Schematics OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName Sincerely, KevinTso 2023.07.20

ZeevaInternationalLimited FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2023-07-17 SUBJECT:FCCApplicationfor(FCCID:2ADM5-EP-0697) ToWhomItMayConcern: We,theundersigned,herebyauthorizeEMTEK(SHENZHEN)CO.,LTD.atSamLvon ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(SHENZHEN)CO.,LTD.onourbehalfshallhavethe sameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, KevinTso 2023.07.20

[Zeeva International Limited] [Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay] [Hong Kong] [China] Date: [2023-08-06] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [2ADM5-EP-0697] FRN of the Applicant: [0024102113] US Agent – Attestation Statement / Part 2.911(d)(7) [Zeeva International Limited]certifies, that as of [2023-08-06], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: [2ADM5-EP-0697]. [Zeeva International Limited], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the 2023-08-06 of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Zeeva International Limited] for FCC ID: [2ADM5-EP-0697]. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [Zeeva International Limited] Designated Agent: FCC US Agent, LLC Company Representative: [Kevin Tso] Designated Agent Representative: Tim Payne Signature: [] Signature:

ReportNo.ENS2306260134W001Page1of5Ver.1.0 FCCID:2ADM5-EP-0697 ReportNo.ENS2306260134W001Page2of5Ver.1.0 ReportNo.ENS2306260134W001Page3of5Ver.1.0 ReportNo.ENS2306260134W001Page4of5Ver.1.0 ReportNo.ENS2306260134W001Page5of5Ver.1.0

AstheproductistoosmalltoprinttheFCCIDontheproduct,accordingtotheregulations,the FCCIDisprintedontheinstructionmanualandtheouterpackagingcolorbox.

ReportNo.ENS2306260134W001Page1of4Ver.1.0 FCCID:2ADM5-EP-0697 ReportNo.ENS2306260134W001Page2of4Ver.1.0 ReportNo.ENS2306260134W001Page3of4Ver.1.0 BTANT ReportNo.ENS2306260134W001Page4of4Ver.1.0

ReportNo.ENS2306260134W00102RPage1of7Ver.1.0 TESTREPORT ProductName：FLIPCHARACTERTWS ModelNumber：EP-0697 FCCID：2ADM5-EP-0697 Preparedfor:ZeevaInternationalLimited Address:Suite1007B,10thFloor,ExchangeTower,33WangChiu Road,KowloonBay,HongKong,China Preparedby:EMTEK(SHENZHEN)CO.,LTD. Address:Building69,MajialongIndustryZone,NanshanDistrict, Shenzhen,Guangdong,China Tel:(0755)26954280 Fax:(0755)26954282 ReportNumber:ENS2306260134W00102R Date(s)ofTests:June27,2023toJuly11,2023 Dateofissue:July11,2023 $二维码$ ReportNo.ENS2306260134W00102RPage2of7Ver.1.0 TableofContents 1.TESTRESULTCERTIFICATION...............................................................................................................................................3 2.EUTSPECIFICATION.................................................................................................................................................................5 3.TESTREQUIREMENT................................................................................................................................................................6 4.MEASUREMENTRESULT.........................................................................................................................................................6 ReportNo.ENS2306260134W00102RPage3of7Ver.1.0 1.TESTRESULTCERTIFICATION Applicant:ZeevaInternationalLimited Address: Suite1007B,10thFloor,ExchangeTower,33WangChiuRoad,KowloonBay, HongKong,China Manufacturer:ZeevaInternationalLimited Address: Suite1007B,10thFloor,ExchangeTower,33WangChiuRoad,KowloonBay, HongKong,China EUT:FLIPCHARACTERTWS ModelName:EP-0697 Trademark:N/A MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTESTRESULT §15.247(i),§2.1093 PASS TheaboveequipmentwastestedbyEMTEK(SHENZHEN)CO.,LTD.Thetestdata,dataevaluation,test procedures,andequipmentconfigurationsshowninthisreportweremadeinaccordancewiththeprocedures giveninANSIC63.10(2013)andtheenergyemittedbythesampleEUTtestedasdescribedinthisreportisin compliancewiththerequirementsofFCCRulesFCC§15.247(i),§2.1093. Thetestresultsofthisreportrelateonlytothetestedsampleidentifiedinthisreport DateofTest:June27,2023toJuly11,2023 Preparedby: UnaYu/Editor Reviewer: JoeXia/Supervisor Approve&AuthorizedSigner:LisaWang/Manager ReportNo.ENS2306260134W00102RPage4of7Ver.1.0 ModifiedHistory VersionReportNo.RevisionDateSummary ENS2306260134W00102R/OriginalReport ReportNo.ENS2306260134W00102RPage5of7Ver.1.0 2. EUTSpecification CharacteristicsDescription Product:FLIPCHARACTERTWS ModelNumber:EP-0697 SKU:9096850,9096851,9096852,9096853,9096854 UPC: 1922342841457,1922342841464,1922342841471,1922342841488, 1922342841495 COLOR:BLACK,WHITE,BLUE,PINK,DARKRED Sample:1# DataRate: 1MbpsforGFSKmodulation 2Mbpsforπ/4-DQPSKmodulation Modulation: GFSK,π/4-DQPSK OperatingFrequency Range(s): 2402-2480MHz NumberofChannels: 79channels TransmitPowerMax: -1.27dBm(0.000746W) AntennaGain:3dBi Powersupply: DC5VfromUSB DC3.7Vfrombattery Evaluationapplied:MPEEvaluation SAREvaluation ReportNo.ENS2306260134W00102RPage6of7Ver.1.0 3. TestRequirement SAREvaluation Accordingto§15.247(i)and§1.1307(b)(1),systemsoperatingundertheprovisionsofthissectionshallbe operatedinamannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergylevelinexcessof theCommission’sguidelines. RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,usingmeasurementsorcomputer simulation.WhenroutineSARevaluationisnotrequired,portabletransmitterswithoutputpowergreaterthan theapplicablelowthresholdrequireSARevaluationtoqualityforTCBapproval. OneantennaisavailablefortheEUT.Theminimumseparationdistanceis5mm. ReportNo.ENS2306260134W00102RPage7of7Ver.1.0 4. MeasurementResult Antennagain:3dBi Transmit Frequency( MHz) Mode Measured Power (dBm) Tune upPower (dBm) Maxtuneup power(dBm) Calculation Result 1-g SAR 2402GFSK -1.86-2±1-1 0.24623 2441GFSK-4.1-5±1-40.12443 2480GFSK-4.85-5±1-40.12543 2402Π/4-DQPSK-1.27-2±1-10.24623 2441Π/4-DQPSK-3.53-4±1-30.15663 2480Π/4-DQPSK-4.32-5±1-40.12543 AccordingtoKDB447498,nostand-alonerequiredforBTantenna,andnosimultaneousSARmeasurementis required. ***EndofReport***

SymbolsLWTA Dimensions 1.60±0.200.80±0.200.80±0.200.30±0.10 NumberTerminalName ① INPUT ② NC Dimensions(Unit: mm) w ①② ( Side View) ( Bottom View) ( Top View) A T L HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedtoanypersonorfirm withoutthepriorwrittenconsentofHanyangAntennaDesignCo.Ltd. Page1 汉阳天线设计有限公司 HanyangAntenna Design Co. Ltd. 606, Building A1, Hisense Industrial Park, No.399 Songling Road, Laoshan District, Qingdao, 12A11 Baoyunda Logistics Information Building, Baoan District, Shenzhen Tel: 0755-23069700 Fax: 0755- 23069700 Applications 1.Bluetooth 2.WirelessLAN 3.ISM band 2.4GHz wirelessapplications Features 1.Surfacemounteddeviceswithasmalldimensionof1.6×0.8×0.8mmmeetfutureminiaturization trend. 2.EmbeddedandLTCC(lowtemperatureco-firedceramic)technologyisabletointegratewith systemdesignaswellasbeatifyingthehousingoffinalproduct. 3.Highstabilityandlowtolerance. P/N:HY160808 SRF07 MatchingCircuits P/N:HY160808 SRF07 Design guidance: 1. In principle, the distance W1 between the left edge of the clearance area and the plate edge should be as large as possible, and Pay attention to the distance from the bottom battery. 2. The width W2 of the main clearance area is preferably 1.5 mm to 2. 5 mm.. 3. The length L of the groove is 2 mm to 5 mm.. 4. The 0603 antenna and the two materials at the bottom of the 0603 antenna can be interchanged up and down. HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedtoanypersonorfirm withoutthepriorwrittenconsentofHanyangAntennaDesignCo.Ltd 606, Building A1, Hisense Industrial Park, No.399 Songling Road, Laoshan District, Qingdao, 12A11 Baoyunda Logistics Information Building, Baoan District, Shenzhen Tel: 0755-23069700 Fax: 0755- 23069700 . Page2 1 W=2 1 W2=2 1.5 Feeding line (微带线) 2 5 0201/0402 footprint 0603 footprint 0201/0402 footprint 0.5 Unit:mm 汉阳天线设计有限公司 HanyangAntenna Design Co. Ltd. 2 L=4 W1 Application example-1 P/N:HY160808 SRF07 HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedtoanypersonorfirm withoutthepriorwrittenconsentofHanyangAntennaDesignCo.Ltd 606, Building A1, Hisense Industrial Park, No.399 Songling Road, Laoshan District, Qingdao, 12A11 Baoyunda Logistics Information Building, Baoan District, Shenzhen Tel: 0755-23069700 Fax: 0755- 23069700 . Page3 汉阳天线设计有限公司 HanyangAntenna Design Co. Ltd. Application example-2 P/N:HY160808 SRF07 HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedtoanypersonorfirm withoutthepriorwrittenconsentofHanyangAntennaDesignCo.Ltd 606, Building A1, Hisense Industrial Park, No.399 Songling Road, Laoshan District, Qingdao, 12A11 Baoyunda Logistics Information Building, Baoan District, Shenzhen Tel: 0755-23069700 Fax: 0755- 23069700 . Page4 汉阳天线设计有限公司 HanyangAntenna Design Co. Ltd. ElectricalCharacteristics CharacteristicCurves FeatureSpecification 1 Centralfrequency2.45GHz&5.5GHz 2 Bandwidth>100MHz 3 Peak gain>3dBi 4 VSWR<2 5 PolarizationLinear 6 AzimuthbeamwidthOmnidirectional 7 Impedance50Ω P/N:HY160808 SRF07 HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedtoanypersonorfirm withoutthepriorwrittenconsentofHanyangAntennaDesignCo.Ltd 606, Building A1, Hisense Industrial Park, No. 399 Songling Road, Laoshan District, Qingdao, 12A11 Baoyunda Logistics Information Building , Baoan District, Shenzhen Tel: 0755-23069700 Fax: 0755-23069700 . Page5 汉阳天线设计有限公司 HanyangAntenna Design Co. Ltd. RadiationPattern Y-ZPlane X-ZPlane coordinates： HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedtoanypersonorfirm withoutthepriorwrittenconsentofHanyangAntennaDesignCo.Ltd 606, Building A1, Hisense Industrial Park, No. 399 Songling Road, Laoshan District, Qingdao, 12A11 Baoyunda Logistics Information Building , Baoan District, Shenzhen Tel: 0755-23069700 Fax: 0755-23069700 . Page6 汉阳天线设计有限公司 HanyangAntenna Design Co. Ltd. P/N:HY160808 SRF07 3D RadiationPattern Frequency 2450MHz5500MHz Avg.gain-0.85-1.30 Peakgain3.03.5 Efficiency82%78% HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedtoanypersonorfirm withoutthepriorwrittenconsentofHanyangAntennaDesignCo.Ltd 606, Building A1, Hisense Industrial Park, No. 399 Songling Road, Laoshan District, Qingdao, 12A11 Baoyunda Logistics Information Building , Baoan District, Shenzhen Tel: 0755-23069700 Fax: 0755-23069700 . Page7 汉阳天线设计有限公司 HanyangAntenna Design Co. Ltd. P/N:HY160808 SRF07 Temperature：40±2°C Humidity：90~95%RH Duration：500h Recovery conditions：Room temperature Recovery Time：24h (Class1) or 48h (Class2) Test Temperature Operating Temperature Temperature RelativeHumidity 25°C±3°C -25°C~+85°C 5~40°C 20~70% Notenoughsolder Weak holding forcemay cause bad connection between the chipandPCB. RecommendedSolderingAmounts The optimal solder fillet amounts forre-flowsoldering 天线厚度 以下 The optimal solder fillet amounts for wavesoldering DependabilityTest Too much solder Cracks tend to occur due to large stress. MoistureProof OptimumSolderAmount forReflowSoldering Solderability At least 95% of the terminal electrode is covered by newsolder. Preheating conditions:80 to 120°C;10~30s. Solder Tem p e r at u r e :2 3 5 ±5°C Duration:2 ±0.5s , Solder Tempe r ature:24 5±5°C Du rat ion:2±0.5s HanyangAntennaDesignCo.Ltd.haspossessionofproprietaryinformationprovidedinthisreportand thisproprietaryinformationshallbekeptinstrictconfidenceandnotdisclosedt…

Text truncated - open the document above for the full version.

ReportNo.ENS2306260134W00101RPage1of62Ver.1.0 TESTREPORT ProductName：FLIPCHARACTERTWS ModelNumber：EP-0697 FCCID：2ADM5-EP-0697 Preparedfor:ZeevaInternationalLimited Address:Suite1007B,10thFloor,ExchangeTower,33WangChiu Road,KowloonBay,HongKong,China Preparedby:EMTEK(SHENZHEN)CO.,LTD. Address:Building69,MajialongIndustryZone,NanshanDistrict, Shenzhen,Guangdong,China TEL:+86-0769-22807078 FAX:+86-0769-22807079 ReportNumber:ENS2306260134W00101R Date(s)ofTests:June27,2023toJuly11,2023 Dateofissue:July11,2023 $二维码$ ReportNo.ENS2306260134W00101RPage2of62Ver.1.0 TableofContents 1TESTRESULTCERTIFICATION..................................................................................................................................................3 2EUTTECHNICALDESCRIPTION.................................................................................................................................................5 3SUMMARYOFTESTRESULT.....................................................................................................................................................6 4TESTMETHODOLOGY.................................................................................................................................................................7 4.1GENERALDESCRIPTIONOFAPPLIEDSTANDARDS......................................................................................................7 4.2MEASUREMENTEQUIPMENTUSED..................................................................................................................................7 4.3DESCRIPTIONOFTESTMODES..........................................................................................................................................8 5FACILITIESANDACCREDITATIONS........................................................................................................................................9 5.1FACILITIES..............................................................................................................................................................................9 5.2EQUIPMENT............................................................................................................................................................................9 5.3LABORATORYACCREDITATIONSANDLISTINGS.........................................................................................................9 6TESTSYSTEMUNCERTAINTY.................................................................................................................................................10 7SETUPOFEQUIPMENTUNDERTEST.....................................................................................................................................11 7.1RADIOFREQUENCYTESTSETUP1.................................................................................................................................11 7.2RADIOFREQUENCYTESTSETUP2.................................................................................................................................11 7.3CONDUCTEDEMISSIONTESTSETUP.............................................................................................................................13 7.4BLOCKDIAGRAMCONFIGURATIONOFTESTSYSTEM.............................................................................................14 7.5SUPPORTEQUIPMENT........................................................................................................................................................14 8FREQUENCYHOPPINGSYSTEMREQUIREMENTS...............................................................................................................15 8.1StandardApplicable.................................................................................................................................................................15 8.2EUTPseudorandomFrequencyHoppingSequence................................................................................................................15 8.3EqualHoppingFrequencyUse................................................................................................................................................16 8.4FrequencyHoppingSystem.....................................................................................................................................................16 9TESTREQUIREMENTS...............................................................................................................................................................17 9.120DB&99%BANDWIDTH.....................................................................................................................................................17 9.2CARRIERFREQUENCYSEPARATION..............................................................................................................................25 9.3NUMBEROFHOPPINGFREQUENCIES............................................................................................................................27 9.4AVERAGETIMEOFOCCUPANCY(DWELLTIME)........................................................................................................29 9.5MAXIMUMPEAKCONDUCTEDOUTPUTPOWER.........................................................................................................33 9.6CONDUCTEDSUPRIOUSEMISSION.................................................................................................................................38 9.7RADIATEDSPURIOUSEMISSION.....................................................................................................................................48 9.8CONDUCTEDEMISSIONTEST...........................................................................................................................................57 9.9ANTENNAAPPLICATION...................................................................................................................................................60 ReportNo…

Text truncated - open the document above for the full version.

ReportNo.ENS2306260134W001Page1of2Ver.1.0 FCCID:2ADM5-EP-0697 ReportNo.ENS2306260134W001Page2of2Ver.1.0