2ADM5-ET-0040-491 24 CAR WHEEL ROMOTE-49 MHz

Warning SpecificationsRemote Standard Control Power On/Off Standard Control Package Contents Product Overview Care and MaintenancePerformance Tips FCC Statement This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or experienced radio/ TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IMPORTANT: BATTERY INFORMATION Keep All Relevant Information for Future Reference Batteries Installation Instruction Manual Thank you for purchasing the Speed Racing Remote Control Car. This manual provides more information about this RC Car, please read the instructions before using. 8+ Speed Racing RC Car x 1Remote Control x 1Instruction Manual x 1 Power supply: 3 x “AA” 1.5V Batteries (alkaline type preferred, not included)Power supply: 2 x “AAA” 1.5V Batteries (alkaline type preferred, not included) Remote:Frequency: YELLOW: 27.145 MHz YELLOW: 27.145 MHz Remote Control Note: To avoid losing control, always pay attention when controlling the RC Car. Forward Button Backward Button Left Button Right Button Forward / Backward Button Left / Right Button This product is suitable to be used by people who has operating experience in remote toy or aged no less than 8 years old.Please do not put the product in your mouth to prevent choking hazard of small parts.Please do not put the finger into available interspaces.Please do not play the product in a brutal way such as throwing, crashing or twisting it. Please store the smaller-sized product accessories in places that are out of reach of children, in order to avoid the occurrence of accidents.Avoid placing the batteries in places in high temperatures and avoid exposure to heat.When young children are operating the product, it shall be ensured that the adults are guiding and making sure the product control is within the viewing range of the controller (or instructor) so that it makes the control of the toy more convenient.When the product is not in use, please switch off the power supplies of the toy, and remove the batteries from the product.Please note that we won’t take any responsibility for any wrong operation as this may result in severe injury or loss of property, and we cannot control the operating process during the time when the user assembles or uses this product.Once this product is sold, we won’t be responsible for any safety responsibility during the time the user operates or uses controls this products. Instruction Manual Instruction Manual Batteries Installation Speed Racing RC Car Speed Racing RC Car 1. Do not drive the Speed Racing RC Car on grass, sand or go through water.2. Do not drive the Speed Racing RC Car in windy or rainy weather.3. Do not drive the Speed Racing RC Car into any sharp object.4. Keep fingers, hair and loose clothing away from Speed Racing RC Car.Always use dry and soft cloth to clean this product.Avoid this product from being exposed to sunlight or heat.Avoid immersing these toys in water, otherwise, the electronic parts may be damaged.Check the product regularly. If any damages are discovered, please stop using immediately, until it is completely repaired in good working condition. 1. TO AVOID BATTERY LEAKAGEa. Always follow the instructions carefully. Use only batteries specified and be sure to insert them correctly by matching the + and - polarity markings.b. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.c. Remove exhausted or dead batteries from the product.d. Remove batteries if product is not to be played with for a long time.e. Do not short-circuit the supply terminals.2. Should this product cause, or be affected by local electrical interference, move it away from other electrical equipment.Reset ( switching ON&OFF again or removing and re-inserting batteries) if necessary. CAUTION: When inserting the batteries, you must insert according to the correct polarity,the Remote Control won’t function if batteries are reversed. Notice: To install batteries into the Remote Control, unscrew the screw on the battery box cover to open the cover. Insert 2 x “AAA” 1.5V batteries (Not Included) into the battery box. Batteries should be placed as shown on the diagram. Replace the battery box cover and tighten the screw. When inserting the batteries, you must insert according to the correct polarity,the Speed Racing RC Car won’t function if batteries are reversed. Notice: To install batteries into the Speed Racing RC Car, unscrew the screws on the battery box cover to open the cover. Insert 3 x “AA” 1.5V batteries (Not Included) into the battery box. Batteries should be placed as shown on the diagram.Replace the battery box cover and tighten…

Text truncated - open the document above for the full version.

Block Diagram Modulator and amplifier RF IC TC4016 Oscillator 49.86MHz Control key Filter Ant

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] FCC Authorization 01/06/2020 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] FCC Non-Confidential Authorization 1/06/2020 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Non-Confidentiality Request regarding application for certification of FCC ID: 2ADM5-ET-0040-49 To: whom it may concern, We, Zeeva International Limited confirm that all the information accompanying this application is permitted to release to the public. Sincerely Yours, Signature: Printed Name: Akshay P Butani Title: Vice President

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] 1/2/2020 Product Similarity Declaration To Whom It May Concern, We, Zeeva International Limited hereby declare that we have a product named as 1 24 CAR WHEEL ROMOTE-49MHz (Model No.: ET-0040-V1; FCC ID: 2ADM5-ET-0040-49) was tested by BACL, meanwhile, for our marketing purpose, we would like to list a series model (ET-0040-V2) on reports and certificate, all the models are identical schematics, except for the differences as below,, 1. Different model No. 2. Different model No. has different color appearance No other changes are made to them. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Signature: Printed Name: Akshay P Butani Title: Vice President

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Antenna

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS

Circuit Description TC4016 Coding IC and the peripheral oscillation modulation amplification circuit is composed. When the function button is pressed by the IC encoded into a set of binary serial code, by the modulation circuit to load the encoded signal into the carrier, amplified by amplification circuit and emitted by the antenna.

U1

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.235 TEST REPORT For Zeeva International Limited Suite 1007B,10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong FCC ID: 2ADM5-ET-0040-49 Report Type: Original Report Product Type: 1 24 CAR WHEEL ROMOTE- 49MHz Report Number: RSZ191216832-00 Report Date: 2020-01-02 Reviewed By: Kieron Luo RF En gineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ191216832-00 FCC Part 15.235 Page 2 of 15 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 JUSTIFICATION ............................................................................................................................................................. 5 SPECIAL ACCESSORIES ................................................................................................................................................. 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 TEST EQUIPMENT LIST ........................................................................................................................................... 7 FCC §15.203 - ANTENNA REQUIREMENT ............................................................................................................. 8 APPLICABLE STANDARD .............................................................................................................................................. 8 ANTENNA CONNECTOR CONSTRUCTION ...................................................................................................................... 8 FCC §15.235(A) & 15.235 (B)&15.209 - RADIATED EMISSIONS AND BAND EDGES .................................. 9 APPLICABLE STANDARD .............................................................................................................................................. 9 MEASUREMENT UNCERTAINTY .................................................................................................................................... 9 EUT SETUP .................................................................................................................................................................. 9 EMI TEST RECEIVER SETUP ....................................................................................................................................... 10 TEST PROCEDURE ...................................................................................................................................................... 10 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 10 TEST RESULTS SUMMARY .......................................................................................................................................... 10 TEST DATA ................................................................................................................................................................ 10 FCC§15.215(C) - 20DB EMISSION BANDWIDTH ................................................................................................ 14 APPLICABLE STANDARD ............................................................................................................................................ 14 TEST PROCEDURE ...................................................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (30 MHz~1 GHz)