2ADM5-HP-0039BALULU PLUSH BT HP

INSTRUCTION MANUAL To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. 5. Product Specification 6. FAQ Turn on your phone and ensure the Bluetooth function is activated. Turn on the headphones, enter the pairing mode. Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information. After a few seconds the phone will list the “HP-0039” as a discover device. Select it and follow your phone’s instructions to select this pairing. Your phone will confirm the pairing, and then press Yes/OK. **Make sure to keep the headphones charging for a minimum of 2 hours before initial use. USB PlugUSB Type-C Plug Remove the USB Type-C Port Cover from the USB Type-C Charging port. Use the USB-Type-C cable accessory provided with this headphones. Connect the USB Type-C plug to the USB Type-C charging port on the headphones. Connect the USB plug to a USB port on wall adapter to activate charging. Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual. Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage. Do not use an diluent or volatile liquid to clean the Bluetooth headphones. Do not use the Bluetooth headphones in a hazardous location. 4.2. Pairing to Mobile phone or other device4.3. Charging your headphones FCC ID: 2ADM5-HP-0039 7. FCC Statement 3. Product Overview Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator slowly blinks with blue. Remove the USB Type-C Port Cover from the USB Type-C Charging port. Plug the USB Type-C to the USB Type-C port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off. Answering a Call Press and hold the Play / Pause Button for 3 seconds. After turning on, the LED indicator flashes blue. Press and hold the Play / Pause Button for 4 seconds. Play / Pause Music Press Play / Pause button to play music and press it again to pause music. Previous / Next Song Press and hold Previous / Next Song button. Volume Up / Down Short press Volume Up / Down button. Voice Assistant Press and hold Play / Pause button for 2 seconds. Press Play / Pause button to answer phone call, press Play / Pause button again to end call. Press and hold 2 seconds to reject call. Double click to redial last call. Charging Turn off Pairing Turn on & Enter the pairing mode 4. How to use Congratulations, and thank you for choosing Baby Bears Plush Wireless Headphones. This manual will help you operate the Faux Fur Earmuffs Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using Baby Bears Plush Wireless Headphones. 1. Introduction Table of Contents 1 Introduction································ 2 Packaging Contents····················· 3 Product Overview························ 4 How To Use······························· 4.1 General Function··················· 4.2 Pairing To Mobile Phone·········· 4.3 Charging Your Product············ 5 Product Specification··················· 6 FAQ········································· 7 FCC Statement··························· Battery Statement······················· 1 2 2 3 3 4 5 6 6 7 8 -The input voltage to the product is 5V 1A. -In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. -Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F. - Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose to sunlight or throw into fire. -Switch off the product after use. -Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product. -In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. Safety instructions for the lithium battery and charging the product Keep all relevant information for future reference Warning: • You must select a qualified charger from a regular manufacturer. • You must charge the Bluetooth headphones if it has not been used for more than 6 months. 1. Why is there no power even when the headphones is turned on ? Ans: Ensure the battery has been charged up to 1 hour for initial use. 2. There is no sound when playback. Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or other master device. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are design…

Text truncated - open the document above for the full version.

Rev1/26/2023 (ZeevaIntLtd) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025.08.29 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2ADM5-HP-0039 ZeevaIntLtd(“theapplicant”)certifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. ZeevaIntLtd(“theapplicant”)certifiesthattheequipmentforwhichauthorizationissoughtdoesnot includecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofits successorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, KEVINTSO Rev1/26/2023 (ZeevaIntLtd) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2025.08.29 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2ADM5-HP-0039 ZeevaIntLtd(“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication,theapplicantis notidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)as anentityproducing“covered”equipment. Sincerely, KEVINTSO

ZeevaIntLtd 1007B-8,1012&15,10thFl,ExchangeTower,33WangChiuRoad,KowloonBay,HongKong Date:[2025.08.22] FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoadColumbia, MD21046 FCCID:2ADM5-HP-0039 FRN:0024102113 USAgent–AttestationStatement/Part2.911(d)(7) [ZeevaIntLtd]certifies,thatasof[2025.08.22],wehavedesignatedFCCUSAgent,LLCto acceptserviceofprocessonourbehalfforFCCID:2ADM5-HP-0039 [ZeevaIntLtd],acceptstomaintainanagentofserviceofprocessintheUnitedStatesforno lessthanoneyearafterherthegranteehaspermanentlyterminatedallmarketingand importationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commissionrelatedadministrativeorjudicialproeitceedinginvolvingtheequipment,whichever islater. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationof beingthedesignatedagentforthepurposeofacceptingserviceofprocessonbehalfof[Zeeva IntLtd]forFCCID:2ADM5-HP-0039 DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:[ZeevaIntLtd]DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:[KevinTso]DesignatedAgentRepresentative:Tim Payne Signature:[Signature]Signature:

ZeevaIntLtd FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:2025.08.29 SUBJECT:FCCID:2ADM5-HP-0039 ToWhomItMayConcern: I,theundersigned,herebystatesthisequipmenthasbeentestedandfoundtocomply withthelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules,and willapplytheSupplier'sDeclarationofConformityproceduretotheclassB computerperipheralportionofthiscompositedevice.IunderstandthefollowingFCC requirements: 1.DevicessubjecttotheSDoCprocedurearerequiredtobetestedtoshow compliancewiththeFCCtechnicalregulationsbyarecognizedaccreditedtesting laboratory.ThetestinglaboratorymustbeaccreditedbyaCommissionapproved accreditationbodyordesignatedunderthetermsofagovernment-to-government MutualRecognitionAgreement(MRA).Alistingofthoseaccreditedtesting laboratoriesthathavebeenrecognizedbytheCommissionispublishedontheFCC Webpage:https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm(Selectthe "accredited"optiontosearchforFCCrecognizedaccreditedtestfirms.) 2.Pt2.1077containsthelistofinformationthatmustbeincludedintheSupplier's DeclarationofConformity,whichmustbesuppliedwitheachproductsold.The SDoCcomplianceinfoshallbeincludedintheUser’sManualorasaseparate sheet.Theinfomustcontainthename,address,andphonenumberofthe responsibleparty,whichmustbelocatedwithintheUnitedStates.Accordingto 2.909(b),theresponsiblepartyiseithertheManufactureroriftheproductis importedtheImporter. Regards, ZeevaIntLtd ------------------------------- （ KevinTso ）

Rev11/20/07 ZeevaIntLtd FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationof FCCID:2ADM5-HP-0039 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription BlockDiagram Schematics OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName Date:2025.08.29 Sincerely, KEVINTSO

ZeevaIntLtd FederalCommunicationsCommission AuthorizationandEvaluationDivision 7453OaklandMillsRoad Columbia,MD21046 Date:2025.08.29 SUBJECT:FCCApplicationfor(FCCID:2ADM5-HP-0039) ToWhomItMayConcern: We,theundersigned,herebyauthorizeSamLvatEMTEK(DONGGUAN)CO.,LTD.on ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(DONGGUAN)CO.,LTD.onourbehalfshallhave thesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, KEVINTSO

ReportNo.ENS2508040209W002Page1of5Ver.1.0 FCCID:2ADM5-HP-0039 ReportNo.ENS2508040209W002Page2of5Ver.1.0 ReportNo.ENS2508040209W002Page3of5Ver.1.0 ReportNo.ENS2508040209W002Page4of5Ver.1.0 ReportNo.ENS2508040209W002Page5of5Ver.1.0

ReportNo.ENS2508040209W002Page1of4Ver.1.0 FCCID:2ADM5-HP-0039 ReportNo.ENS2508040209W002Page2of4Ver.1.0 BTANT ReportNo.ENS2508040209W002Page3of4Ver.1.0 ReportNo.ENS2508040209W002Page4of4Ver.1.0

ReportNo.ENS2508040209W00202RPage1of7Ver.1.0 $二维码$ TESTREPORT ProductName：BALULUPLUSHBTHP ModelNumber：HP-0039-BALULU FCCID ： 2ADM5-HP-0039 Preparedfor:ZeevaIntLtd Address:1007B-8,1012&15,10thFl,ExchangeTower,33Wang ChiuRoad,KowloonBay,HongKong Preparedby:EMTEK(SHENZHEN)CO.,LTD. Address:Building69,MajialongIndustryZone,NanshanDistrict, Shenzhen,Guangdong,China TEL:(0755)26954280 FAX:(0755)26954282 ReportNumber:ENS2508040209W00202R Dateofsamplereceipt:Aug04,2025 Date(s)ofTests:Aug04,2025toAug21,2025 Dateofissue:Aug21,2025 ReportNo.ENS2508040209W00202RPage2of7Ver.1.0 TableofContents 1.TESTRESULTCERTIFICATION...............................................................................................................................................3 2.EUTSPECIFICATION.................................................................................................................................................................5 3.TESTREQUIREMENT................................................................................................................................................................6 4.MEASUREMENTRESULT.........................................................................................................................................................7 ReportNo.ENS2508040209W00202RPage3of7Ver.1.0 1.TESTRESULTCERTIFICATION Applicant:ZeevaIntLtd Address: 1007B-8,1012&15,10thFl,ExchangeTower,33WangChiuRoad,Kowloon Bay,HongKong EUT:BALULUPLUSHBTHP ModelName:HP-0039-BALULU Trademark:N/A MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTESTRESULT §15.247(i),§2.1093 PASS TheaboveequipmentwastestedbyEMTEK(SHENZHEN)CO.,LTD.Thetestdata,dataevaluation,test procedures,andequipmentconfigurationsshowninthisreportweremadeinaccordancewiththeprocedures giveninANSIC63.10(2013)andtheenergyemittedbythesampleEUTtestedasdescribedinthisreportisin compliancewiththerequirementsofFCCRulesFCC§15.247(i),§2.1093. Thetestresultsofthisreportrelateonlytothetestedsampleidentifiedinthisreport DateofTest:Aug04,2025toAug21,2025 Preparedby: UnaYu/Editor Reviewer: JoeXia/Supervisor Approve&AuthorizedSigner:LisaWang/Manager ReportNo.ENS2508040209W00202RPage4of7Ver.1.0 ModifiedHistory VersionReportNo.RevisionDateSummary ENS2508040209W00202R/OriginalReport ReportNo.ENS2508040209W00202RPage5of7Ver.1.0 2. EUTSpecification CharacteristicsDescription Product:BALULUPLUSHBTHP ModelNumber:HP-0039-BALULU SKU:9224575,9224574,9224573 UPC:1922341090757,1922341090740,1922341090733 COLOR:PINK,PURPLE,BLUE Sample:1# DataRate: 1MbpsforGFSKmodulation 2Mbpsforπ/4-DQPSKmodulation Modulation: GFSK,π/4-DQPSK OperatingFrequency Range(s): 2402-2480MHz NumberofChannels: 79channels TransmitPowerMax: 1.53dBm(0.0014221W) AntennaGain:-0.58dBi Powersupply: DC5VfromUSB DC3.7Vfrombattery Evaluationapplied:MPEEvaluation SAREvaluation ReportNo.ENS2508040209W00202RPage6of7Ver.1.0 3. TestRequirement SAREvaluation Accordingto447498D01V06,systemsoperatingundertheprovisionsofthissectionshallbeoperatedina mannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission’sguidelines. RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,usingmeasurementsorcomputer simulation.WhenroutineSARevaluationisnotrequired,portabletransmitterswithoutputpowergreaterthan theapplicablelowthresholdrequireSARevaluationtoqualityforTCBapproval. OneantennaisavailablefortheEUT.Theminimumseparationdistanceis5mm. ReportNo.ENS2508040209W00202RPage7of7Ver.1.0 4. MeasurementResult Antennagain:-0.58dBi Transmit Frequency (MHz) Mode Measured Power (dBm) Tuneup Power (dBm) Maxtune uppower (dBm) Calculation Result Calculation threshold(1 -gSAR) 2402GFSK0.79 0±11 0.39023 2441GFSK-0.030±110.39343 2480GFSK-0.990±110.39653 2402Π/4-DQPSK1.531±120.49133 2441Π/4-DQPSK0.760±110.39343 2480Π/4-DQPSK-0.130±110.39653 AccordingtoKDB447498D01V06,nostand-alonerequiredforBTantenna,andnosimultaneousSAR measurementisrequired. ***EndofReport***

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Building S7,12th Floor,Tian'an Digital City,Fenggang,Dongguan Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dBi) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dBi) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

ReportNo.ENS2508040209W00201RPage1of62Ver.1.0 TESTREPORT ProductName：BALULUPLUSHBTHP ModelNumber：HP-0039-BALULU FCCID：2ADM5-HP-0039 Preparedfor:ZeevaIntLtd Address:1007B-8,1012&15,10thFl,ExchangeTower,33Wang ChiuRoad,KowloonBay,HongKong Preparedby:EMTEK(SHENZHEN)CO.,LTD. Address:Building69,MajialongIndustryZone,NanshanDistrict, Shenzhen,Guangdong,China TEL:(0755)26954280 FAX:(0755)26954282 ReportNumber:ENS2508040209W00201R Dateofsamplereceipt:Aug04,2025 Date(s)ofTests:Aug04,2025toAug21,2025 Dateofissue:Aug21,2025 $二维码$ ReportNo.ENS2508040209W00201RPage2of62Ver.1.0 TableofContents 1TESTRESULTCERTIFICATION..................................................................................................................................................3 2EUTTECHNICALDESCRIPTION.................................................................................................................................................5 3SUMMARYOFTESTRESULT.....................................................................................................................................................6 4TESTMETHODOLOGY.................................................................................................................................................................7 4.1GENERALDESCRIPTIONOFAPPLIEDSTANDARDS......................................................................................................7 4.2MEASUREMENTEQUIPMENTUSED..................................................................................................................................7 4.3DESCRIPTIONOFTESTMODES..........................................................................................................................................8 5FACILITIESANDACCREDITATIONS........................................................................................................................................9 5.1FACILITIES..............................................................................................................................................................................9 5.2EQUIPMENT............................................................................................................................................................................9 5.3LABORATORYACCREDITATIONSANDLISTINGS.........................................................................................................9 6TESTSYSTEMUNCERTAINTY.................................................................................................................................................10 7SETUPOFEQUIPMENTUNDERTEST.....................................................................................................................................11 7.1RADIOFREQUENCYTESTSETUP1.................................................................................................................................11 7.2RADIOFREQUENCYTESTSETUP2.................................................................................................................................11 7.3CONDUCTEDEMISSIONTESTSETUP.............................................................................................................................13 7.4BLOCKDIAGRAMCONFIGURATIONOFTESTSYSTEM.............................................................................................14 7.5SUPPORTEQUIPMENT........................................................................................................................................................14 8FREQUENCYHOPPINGSYSTEMREQUIREMENTS...............................................................................................................15 8.1StandardApplicable.................................................................................................................................................................15 8.2EUTPseudorandomFrequencyHoppingSequence................................................................................................................15 8.3EqualHoppingFrequencyUse................................................................................................................................................16 8.4FrequencyHoppingSystem.....................................................................................................................................................16 9TESTREQUIREMENTS...............................................................................................................................................................17 9.120DB&99%BANDWIDTH.....................................................................................................................................................17 9.2CARRIERFREQUENCYSEPARATION..............................................................................................................................24 9.3NUMBEROFHOPPINGFREQUENCIES............................................................................................................................26 9.4AVERAGETIMEOFOCCUPANCY(DWELLTIME)........................................................................................................28 9.5MAXIMUMPEAKCONDUCTEDOUTPUTPOWER.........................................................................................................35 9.6CONDUCTEDSUPRIOUSEMISSION.................................................................................................................................39 9.7RADIATEDSPURIOUSEMISSION.....................................................................................................................................49 9.8CONDUCTEDEMISSIONTEST...........................................................................................................................................58 9.9ANTENNAAPPLICATION...................................................................................................................................................6…

Text truncated - open the document above for the full version.

ReportNo.ENS2508040209W00201RPage36of62Ver.1.0 DH5-Ant1-2402-PASS DH5-Ant1-2441-PASS ReportNo.ENS2508040209W00201RPage37of62Ver.1.0 DH5-Ant1-2480-PASS 2DH5-Ant1-2402-PASS ReportNo.ENS2508040209W00201RPage38of62Ver.1.0 2DH5-Ant1-2441-PASS 2DH5-Ant1-2480-PASS ReportNo.ENS2508040209W00201RPage39of62Ver.1.0 9.6CONDUCTEDSUPRIOUSEMISSION 9.6.1ApplicableStandard AccordingtoFCCPart15.247(d)andKDB558074D0115.247MEASGUIDANCEv05r02 AccordingtoICRSS-2475.5 9.6.2ConformanceLimit Inany100kHzbandwidthoutsidethefrequencybandinwhichthespreadspectrumintentionalradiatoris operating,theradiofrequencypowerthatisproducedbytheintentionalradiatorshallbeatleast20dBbelowthat inthe100kHzbandwidthwithinthebandthatcontainsthehighestlevelofthedesiredpower,basedoneitheran RFconducted,providedthetransmitterdemonstratescompliancewiththepeakconductedpowerlimits. 9.6.3TestConfiguration Testaccordingtoclause7.1radiofrequencytestsetup1 9.6.4TestProcedure Thetransmitteroutput(antennaport)wasconnectedtothespectrumanalyzer Referencelevelmeasurement Establishareferencelevelbyusingthefollowingprocedure: SetinstrumentcenterfrequencytoDSSchannelcenterfrequency. SetSpan=approximately5timesthe20dBbandwidth,centeredonahoppingchannel. SettheRBW=100kHz.SettheVBW≥3xRBW. SetDetector=peak.SetSweeptime=autocouple. SetTracemode=maxhold.Allowtracetofullystabilize. UsethepeakmarkerfunctiontodeterminethemaximumMaximumconducetedlevel. Notethatthechannelfoundtocontainthemaximumconducetedlevelcanbeusedtoestablishthereference level. Band-edgemeasurement Usethefollowingspectrumanalyzersettings: Span=wideenoughtocapturethepeakleveloftheemissionoperatingonthechannelclosesttotheband-edge, aswellasanymodulationproductswhichfalloutsideoftheauthorizedbandofoperation SetRBW  1%ofthespan=100kHzSetVBW  3xRBW SetSweep=autoSetDetectorfunction=peakSetTrace=maxhold Allowthetracetostabilize.Setthemarkerontheemissionatthebandedge,oronthehighestmodulation productoutsideoftheband,ifthislevelisgreaterthanthatatthebandedge.Enablethemarker-deltafunction, thenusethemarker-to-peakfunctiontomovethemarkertothepeakofthein-bandemission.Themarker-delta valuenowdisplayedmustcomplywiththelimitspecifiedinthisSection. Now,usingthesameinstrumentsettings,enablethehoppingfunctionoftheEUT.Allowthetracetostabilize. Followthesameprocedurelistedabovetodetermineifanyspuriousemissionscausedbythehoppingfunction alsocomplywiththespecifiedlimit. Emissionlevelmeasurement Usethefollowingspectrumanalyzersettings: Span=wideenoughtocapturethepeaklevelofthein-bandemissionandallspuriousemissions(e.g.,harmonics) fromthelowestfrequencygeneratedintheEUTupthroughthe10thharmonic.(30MHzto25GHz).SetRBW= 100kHzSetVBW  RBW SetSweep=autoSetDetectorfunction=peakSetTrace=maxhold Allowthetracetostabilize.Setthemarkeronthepeakofanyspuriousemissionrecorded.Theleveldisplayed mustcomplywiththelimitspecifiedinthisSection. ReportNo.ENS2508040209W00201RPage40of62Ver.1.0 9.6.5TestResults Temperature: 25 ̊ C RelativeHumidity:45% ATMPressure:1011mbar Note:N/A Alltheantennaandmodesmodehavebeentested,andtheworstresultrecordedwasreportasbelow: Bandedgemeasurements TestModeAntennaChNameFrequency[MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5Ant1Low24020.11-46.24≤-19.89PASS DH5Ant1High2480-2.19-46.12≤-22.19PASS DH5Ant1LowHop_2402-0.39-36.46≤-20.39PASS DH5Ant1HighHop_2480-1.53-34.37≤-21.53PASS ReportNo.ENS2508040209W00201RPage41of62Ver.1.0 DH5-Ant1-2402-PASS DH5-Ant1-2480-PASS ReportNo.ENS2508040209W00201RPage42of62Ver.1.0 DH5-Ant1-Hop_2402-PASS DH5-Ant1-Hop_2480-PASS ReportNo.ENS2508040209W00201RPage43of62Ver.1.0 ConductedSpuriousEmission TestModeAntennaFrequency[MHz] FreqRange [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5Ant124020~Reference-0.47-0.47---PASS DH5Ant1240230~1000-0.47-60.52≤-20.47PASS DH5Ant124021000~26500-0.47-45.88≤-20.47PASS DH5Ant124410~Reference-1.21-1.21---PASS DH5Ant1244130~1000-1.21-59.82≤-21.21PASS DH5Ant124411000~26500-1.21-47.72≤-21.21PASS DH5Ant124800~Reference-2.47-2.47---PASS DH5Ant1248030~1000-2.47-59.95≤-22.47PASS DH5Ant124801000~26500-2.47-49.26≤-22.47PASS ReportNo.ENS2508040209W00201RPage44of62Ver.1.0 DH5-Ant1-2402-0~Reference-PASS DH5-Ant1-2402-30~1000-PASS ReportNo.ENS2508040209W00201RPage45of62Ver.1.0 DH5-Ant1-2402-1000~26500-PASS DH5-Ant1-2441-0~Reference-PASS ReportNo.ENS2508040209W00201RPage46of62Ver.1.0 DH5-Ant1-2441-30~1000-PASS DH5-Ant1-2441-1000~26500-PASS ReportNo.ENS2508040209W00201RPage47of62Ver.1.0 DH5-Ant1-2480-0~Reference-PASS DH5-Ant1-2480-30~1000-PASS ReportNo.ENS2508040209W00201RPage48of62Ver.1.0 DH5-Ant1-2480-1000~26500-PASS ReportNo.ENS2508040209W00201RPage49of62Ver.1.0 9.7RADIATEDSPURIOUSEMISSION 9.7.1ApplicableStandard AccordingtoFCCPart15.247(d),15.205,15.209andKDB558074D0115.247MEASGUIDANCEv05r02 AccordingtoICRSS-GenandRSS-247 9.7.2ConformanceLimit AccordingtoFCCPart15.247(d):radiatedemissionswhichfallintherestrictedbands,asdefinedin§15.205(a), mustalsocomplywiththeradiatedemissionlimitsspecifiedin§15.209(a)(see§15.205(c)). AccordingtoFCCPart15.205,Restrictedbands MHzMHzMHzGHz 0.090-0.11016.42-16.423399.9-4104.5-5.15 10.495-0.50516.69475-16.69525608-6145.35-5.46 2.1735-2.190516.80425-16.80475960-12407.25-7.75 4.125-4.12825.5-25.671300-14278.025-8.5 4.17725-4.1777537.5-38.251435-1626.59.0-9.2 4.20725-4.2077573-74.61645.5-1646.59.3-9.5 6.215-6.21874.8-75.21660-171010.6-12.7 6.26775-6.26825123-1382200-230014.47-14.5 8.291-8.294149.9-150.052310-239015.35-16.2 8.362-8.366156.52475-156.525252483.5-250017.7-21.4 8.37625-8.38675156.7-156.92690-290022.01-23.12 8.41425-8.41475162.0125-167.173260-326723.6-24.0 12.29-12.293167.72-173.23332-333931.2-31.8 12.51975-12.52025240-2853345.8-335836.43-36.5 12.57675-12.57725322-335.43600-4400(2) 13.36-13.41 AccordingtoFCCPart15.205,thelevelofanytransmitterspuriousemissioninRestrictedbandsshallnotexceed theleveloftheemissionspecifiedinthefollowingtable RestrictedFrequency(MHz)FieldStrength(μV/m)FieldStrength(dBμV/m)MeasurementDistance 0.009-0.4902400/F(KHz)20log(uV/m)300 0.490-1.70524000/F(KHz)20log(uV/m)30 1.705…

Text truncated - open the document above for the full version.

ReportNo.ENS2508040209W002Page1of2Ver.1.0 FCCID:2ADM5-HP-0039 ReportNo.ENS2508040209W002Page2of2Ver.1.0