2ADM5-SP-0213BT LED LANTERN SPEAKER

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: [email protected] Date: 12/14/2022 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that： Product Name: BT LED LANTERN SPEAKER Model No.: SP-0213 FCC ID: 2ADM5-SP-0213 For BT Mode: BLE 1M/2M ; are disable by software For Below are activated: Bluetooth BDR(GFSK) , EDR(π/4‐DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturer’s responsibility to provide the radio configurations to ensure compliance with Commission’s rules. Sincerely Yours, Signature: Printed Name: Akshay P Butani Tiltle: Vice President

BlockDiagram LTK5128 DAC OSCILLATOR FLASH BT_ANT XTAL 24M AC6969 SPEAKER LED_RGB BATUSB 2402-2480MHz CL4064

Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF External Photos Page 1 of 4 External Photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF External Photos Page 2 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF External Photos Page 3 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF External Photos Page 4 of 4

Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF Internal Photos Page 1 of 5 Internal Photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF Internal Photos Page 2 of 5 Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF Internal Photos Page 3 of 5 Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF Internal Photos Page 4 of 5 ANT Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF Internal Photos Page 5 of 5

AC6969 24MHz Circuit Description 1. Battery(3.7V)provides energy for the Bluetooth chip( ) ; Crystal oscillator() provides the clock signal for the Bluetooth chip. Bluetooth signals get through a matching circuit, and then transmitted to the space through the antenna（2402MHz‐2480MHz）. When the product is connected, the product can be in two‐way communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit. Modulation Technique: GFSK, π/4-DQPSK, 8DPSK

Shenzhen Accurate Technology Co., Ltd. Report No.: RA221116-54403E-RF Version 11: 2021-11-09 Page 10 of 62 FCC-BT FCC§15.247 (i), §1.1307 (b) & §2.1093 – RF EXPOSURE Applicable Standard According to FCC §2.1093 and §1.1307(b), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D04 Interim General RF Exposure Guidance v01, clause 2.1.2 – 1- mW test Exemption: Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. Test Result For worst case: Mode Frequency Maximum Tune-up Conducted Power 1-mW test Exemption (MHz) (dBm) (mW) BDR/EDR 2402-2480 0 1 Yes Note: The tune-up power was declared by the applicant. Result: Compliant.

6969 1 V+ 2 D- 3 D+ 4 TG 5 G 67 89 J1 MICRO_USB 1 CHRG 2 GND 3 BAT 4 VCC 5 PROG U1 C L 4064 R1 2 . 2K C1 105 R2 1K D1 R C2 105 1 BA T+ 1 BA T- 1 SD 2 BYP 3 MODE 4 IN- 5 SPK- 6 VCC 7 GND 8 SPK+ 9 PGND U4 L TK5128 C11 226 1 SPK+ 1 SPK- C12 NC R7 10K R8 1K C13 105 R9 10K C14 104 R10 33K 1 MUTE 2 BAT+ 3 +3.3V 4 ADKEY/LED 5 FM 6 BT_RF 7 OSCI 8 OSCO 9 SD_CLK 10 SD_CMD 11 DM 12 DP 13 MIC 14 GND 15 VCOM 16 DACL U3 AC C4 105 C5 105 S1 D2 B R5 1K C6 2P7 L2 NC L1 NC 1 2 A NT 1 2 3 4 Y1 24M C7 105 1 DP 1 DM 1 L E D+ C8 105 1 VDD 2 DO 3 GND 4 DI D3 RGB 1 VDD 2 DO 3 GND 4 DI D4 RGB 1 VDD 2 DO 3 GND 4 DI D5 RGB 1 VDD 2 DO 3 GND 4 DI D6 RGB 1 VDD 2 DO 3 GND 4 DI D7 RGB 1 VDD 2 DO 3 GND 4 DI D8 RGB 1 VDD 2 DO 3 GND 4 DI D9 RGB 1 VDD 2 DO 3 GND 4 DI D10 RGB 1 VDD 2 DO 3 GND 4 DI D11 RGB 1 VDD 2 DO 3 GND 4 DI D12 RGB 1 G ND 1 DA TA R3 1K 1 G 2 S 3 D Q1 3401 R4 100K 1 B 2 E 3 C Q2 8050 R6 10K

Zhuhai Jieli technology Co.,LTD F3205 FreqEffiEffiGainGainUHISDHISMaxMinDirectivity Beamwidth AttHAttV (MHz)(%)(dB)(dBi)(dBd)(%)(%)(dB)(dB)(dBi)(3dB)(dB)(dB) 240019.33-7.14-3.13-5.2800-3.13 -14.047.149047.3646.86 241020.08-6.97-3.14-5.2900-3.14 -14.546.976047.446.9 242018.24-7.39-3.7-5.8500-3.7 -15.327.399047.2846.76 243022.85-6.41-2.75-4.900-2.75 -15.036.413047.3546.78 244019.67-7.06-3.42-5.5700-3.42-16.27.069047.1546.65 245023.96-6.21-2.51-4.6600-2.51 -15.746.219047.3346.85 246022-6.58-2.78-4.9300-2.78 -16.046.589047.7247.22 247022.26-6.52-2.67-4.8200-2.67 -16.416.526047.3646.93 248028.38-5.47-1.63-3.7800-1.63 -15.445.47047.5647.1 249020.55-6.87-2.97-5.1200-2.97 -16.466.87047.0546.67 250022.22-6.53-2.53-4.6800-2.53 -15.946.53047.0146.63 AdditionalInfor NULL Passive Test For BT2.4 Application Information O4Version5.245.351 TotalTime5m 45s 25ms Manufacture: Model：

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 11: 2021-11-09 Page 1 of 62 FCC-BT TEST REPORT Applicant Name : Zeeva International Limited Address : Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Report Number : RA221116-54403E-RF FCC ID: 2ADM5-SP-0213 Test Standard (s) FCC PART 15.247 Sample Description Product Type: BT LED LANTERN SPEAKER Model No.: SP-0213 Date Received: 2022-11-16 Date of Test: 2022-11-19 to 2022-11-21 Report Date: 2022-11-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Roger.Ling Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: RA221116-54403E-RF Version 11: 2021-11-09 Page 2 of 62 FCC-BT TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC§15.247 (i), §1.1307 (b) & §2.1093 – RF EXPOSURE ...................................................................................... 10 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 11 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 EUT SETUP ................................................................................................................................................................ 12 EMI TEST RECEIVER SETUP ....................................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................................... 13 FACTOR & MARGIN CALCULATION ........................................................................................................................... 13 TEST DATA ................................................................................................................................................................ 13 FCC §15.205, §15.209 & §15.247(d) – RADIATED EMISSIONS .......................................................................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF Test Photos Page 1 of 2 Photo of Power Line Conducted Emission Measurement Shenzhen Accurate Technology Co., Ltd. Project No.: RA221116-54403E-RF Test Photos Page 2 of 2 Radiated Spurious Emissions Test View (Below 1GHz) Radiated Spurious Emissions Test View (Above 1GHz)