2ADRR-H6813Bluetooth Speaker

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesiredoperation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TVtechnician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device and its antenna(s) must not be co-located oroperation in conjunction with any other antenna or transmitter.

Shenzhen Hameigao Electronics CO,.LTD. FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company nameShenzhen Hameigao Electronics CO,.LTD. Address6/F,B7 Building, Yijing Industrial Park, Tianliao, Gongming Town, Guangming District CityShenzhen CountryChina request for this certification filing under: Grantee CodeProduct Number FCC ID:2ADRR-H6813 to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) ExhibitFile NameDescription xOperational Descriptionexplaining the functioning of the block diagram xBlock Diagramsshowing the systematic building blocks of the EUT xSchematics Diagramsshowing components, their values and interconnection Bill of MaterialsList of components used on the PCB’s of the EUT Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Enschede, Netherlands 2014-12-09M. Koop (authorized) Manager

Shenzhen Hameigao Electronics CO,.LTD. FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Company name Shenzhen Hameigao Electronics CO,.LTD. 6/F,B7 Building, Yijing Industrial Park, Tianliao, Gongming Town, Guangming District, City Shen Zhen Country China declare that the following representative (agent): Name (person) KAIT CHEN Company name WST Certification & Testing (HK) Limited Address 12/F., San Toi Building,137-139 Connaught Road Central, City Hong Kong, Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Bluetooth Speaker Type or Model(s) H6813, HMG6813 Tradename or Brand(s) We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Shenzhen, ChinaDec. 09,2014 Deli Engineer

FCC ID LABEL: Label Location FCC ID: 2ADRR- H6813 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.

Report No.: WST20141209004 WST Certification & Testing (HK) Limited Page 1 of 22 FCC TEST REPORT For Shenzhen Hameigao Electronics CO,.LTD. Bluetooth Speaker Trade Name : Model No. : H6813, HMG6813 All the model are the same circuit and RF module,except the appearance colour, this report only test mode name: H6813 FCC ID : 2ADRR- H6813 Frequency range : 2402-2480MHz Number of Channel : 79CH Type of antenna : Internal monopole Antenna Applicant : Shenzhen Hameigao Electronics CO,.LTD. 6/F,B7 Building, Yijing Industrial Park, Tianliao, Gongming Town, Guangming District, Shenzhen Regulation : FCC Rules and Regulations Part 15 Subpart C Section 15.249 Prepared by : WST Certification & Testing (HK) Limited Address : 12/F., San Toi Building,137-139 Connaught Road Central, Hong Kong, China Report No.: : WST20141209004 Test Date : Dec. 02-09, 2014 Date of Report : Dec. 09, 2014 Report No.: WST20141209004 WST Certification & Testing (HK) Limited Page 2 of 22 TABLE OF CONTENT Description Page Test Report Declaration 1.1 TEST PROCEDURES AND RESULTS ..................................................................................... 4 1.2. Test Facility ......................................................................................................................................... 4 1. GENERAL INFORMATION ................................................................................................ 5 2.1. General Information ............................................................................................................................ 5 2. TEST INSTRUMENT USED ................................................................................................. 6 3. OPERATION OF EUT DURING TESTING ........................................................................... 7 4. CONDUCTED EMISSIONS TEST....................................................................................... 9 4.1. Conducted Power Line Emission Limit ........................................................................................ 9 4.2. Test Setup ...................................................................................................................................... 9 4.3. Test Procedure ............................................................................................................................. 10 4.4. Test Result ................................................................................................................................... 10 5. RADIATED EMISSION TEST ........................................................................................... 11 5.1. Radiation Limit ........................................................................................................................... 11 5.2. Test Setup .................................................................................................................................... 11 5.3. Test Procedure ............................................................................................................................. 12 5.4. Test Result ................................................................................................................................... 13 6. BAND EDGE ......................................................................................................................... 17 6.1. Limits .......................................................................................................................................... 17 6.2. Test Procedure ............................................................................................................................. 17 6.3. Test Result ................................................................................................................................... 17 7. OCCUPIED BANDWIDTH MEASUREMENT ................................................................ 18 7.1. Test Setup .................................................................................................................................... 18 7.2. Test Procedure ............................................................................................................................. 18 7.3. Measurement Equipment Used ................................................................................................... 18 7.4. Test Result ................................................................................................................................... 18 8. ANTENNA REQUIREMENT ............................................................................................. 20 9. PHOTOGRAPH OF TEST ..................................................................................................... 21 Report No.: WST20141209004 WST Certification & Testing (HK) Limited Page 3 of 22 TEST REPORT DECLARATION Applicant : Shenzhen Hameigao Electronics CO,.LTD. Manufacturer : Shenzhen Hameigao Electronics CO,.LTD. EUT Description : Bluetooth Speaker Model NO. : H6813, HMG6813 All the model are the same circuit and RF module,except the appearance colour, this report only test mode name: H6813 Serial NO. : N/A Power Supply : DC 5V Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart C Section 15.249 ANSI C63.4:2009 The device described above is tested by WST Certification & Testing (HK) Limited to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart C Section 15.249 limits. The measurement results are contained in this test report and WST Certification & Testing (HK) Limited. is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the Equipment Under Test (EUT) is to be technically compliant with the FCC requirements This report applies to above tested sample only. This report shall not be reproduced in part without written approval of WST Certification & Testing (…

Text truncated - open the document above for the full version.

1. PHOTOGRAPH OF TEST Radiated Emission Conducted Power Line Emission