2ADSQFS-52423Fifty Shades of Grey (Relentless Vibrations)Remote control Egg

Operational description 1, 2.4G RF chipset SCM20160 2,Built in intelligent power management software 3,power by 2pcs replaceable button batteries 601523 4,working range: 10 meters 5,product size: egg: 194mm(L)*33mm ;controller: 60mm(W) FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged Controller Egg to try correct the interference by one or more of the receiving measures: Reorient or replace relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless user could lose the authority to operate this equipment if an unauthorized change or modification is made.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 3 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 3 Rev 5.0 Lovehoney Ltd 2014-12-11 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Lovehoney Ltd _____hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (Fifty Shades of Grey "Relentless Vibrations" Remote control Egg, FS-52423) FCC ID: 2ADSQFS-52423 Sincerely, Client’s signature Client’s name / title Paul Jaques / Operations Manager Contact information / address 100 Locksbrook Road, Bath, BA1 3EN, UK

Lovehoney Ltd SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 Lovehoney Ltd SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 2014-12-11 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ADSQFS-52423 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title Paul Jaques / Operations Manager Contact information / address 100 Locksbrook Road, Bath, BA1 3EN, UK

Report No.: TB-RF142674 Page: 3 of 8 TB-RF-075-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Report No.: TB-RF142674 Page: 4 of 8 TB-RF-075-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT

Report No.: TB-FCC142674 Page: 1 of 8 TB-RF-074-1.0 Appendix IID Label FCC ID: 2ADSQFS-52423 Lovehoney Ltd Model: FS-52423

Report No.: TB-RF142674 Page: 2 of 8 TB-RF-075-1.0 Appendix II ID Label Location FCC ID LOCATION

Report No.: TB-RF142674 Page: 5 of 8 TB-RF-075-1.0 Appendix IV EUT Internal Photographs Photo 5 Internal of EUT Photo 6 Appearance of PCB Report No.: TB-RF142674 Page: 6 of 8 TB-RF-075-1.0 Photo 7 Appearance of PCB Photo 8 Appearance of Battery Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC142674 Page: 1 of 34 TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 FCC Radio Test Report FCC ID: 2ADSQFS-52423 Report No. : TB-FCC142674 Applicant : Lovehoney Ltd Equipment Under Test (EUT) EUT Name : Fifty Shades of Grey "Relentless Vibrations" Remote control Egg Model No. : FS-52423 Serial No. : N/A Brand Name : FSOG Receipt Date : 2014-11-12 Test Date : 2014-11-12 to 2014-12-10 Issue Date : 2014-12-11 Standards : FCC Part 15, Subpart C (15.249: 2014) Test Method : ANSI C63.4:2003 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, The EUT technically complies with the FCC requirements Test/Witness Engineer : Approved& Authorized : This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TB-FCC142674 Page: 2 of 34 TB-RF-074-1.1 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 3 1.1 Client Information ................................................................................................................. 3 1.2 General Description of EUT (Equipment Under Test) ................................................... 3 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 4 1.4 Description of Support Units .............................................................................................. 4 1.5 Description of Test Mode .................................................................................................... 4 1.6 Description of Test Software Setting ................................................................................ 5 1.7 Test Facility ........................................................................................................................... 6 2. TEST SUMMARY ....................................................................................................................... 7 3. CONDUCTED EMISSION TEST ............................................................................................. 8 3.1 Test Standard and Limit ...................................................................................................... 8 3.2 Test Setup ............................................................................................................................. 8 3.3 Test Procedure ..................................................................................................................... 8 3.4 Test Equipment Used .......................................................................................................... 9 3.5 EUT Operating Mode .......................................................................................................... 9 3.6 Test Data ............................................................................................................................... 9 4. RADIATED EMISSION TEST ................................................................................................ 12 4.1 Test Standard and Limit .................................................................................................... 12 4.2 Test Setup ........................................................................................................................... 13 4.3 Test Procedure ................................................................................................................... 14 4.4 EUT Operating Condition ................................................................................................. 14 4.5 Test Equipment .................................................................................................................. 15 4.6 Test Data ............................................................................................................................. 15 5. BANDWIDTH TEST ................................................................................................................. 30 5.1 Test Setup ........................................................................................................................... 30 5.2 Test Procedure ................................................................................................................... 30 5.3 EUT Operating Condition ................................................................................................. 30 5.4 Test Equipment .................................................................................................................. 30 5.5 Test Data ............................................................................................................................. 30 6. ANTENNA REQUIREMENT ................................................................................................... 34 6.1 Standard Requirement ...................................................................................................... 34 6.2 Antenna Connected Construction ................................................................................... 34 6.3 Result ................................................................................................................................... 34 Report No.: TB-FCC142674 Page: 3 of 34 TB-RF-074-1.1 1. General Information about EUT 1.1 Client Information Applicant : Lovehoney Ltd Address : 100 Locksbrook Road, Bath, BA1 3EN, UK Manufacturer : Odeco Ltd Address : 2F, Block 7th, Y…

Text truncated - open the document above for the full version.

Report No.: TB-RF142674 Page: 7 of 8 TB-RF-075-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Bellow 1 GHz) Report No.: TB-RF142674 Page: 8 of 8 TB-RF-075-1.0 Photo of Setup for Conducted Emission