2ADTD-K7CRT01EStand Pole

Stand Pole Quick Start Guide UD30692B Stand Pole with Exit Button Stand Pole with QR Code Scanner Stand Pole with Card Receiver Stand Pole with Card Reader AppearanceAppearance Appearance Appearance DimensionDimension Dimension Dimension WiringWiring Wiring Wiring 137 mm 900 mm900 mm 900 mm 900 mm 876 mm 876 mm 876 mm 133 mm Exit Button QR Code Scanner Card Receiver Maintenance Door Indicator (stay green when powered on) Card Reader 900 mm876 mm 900 mm 133 mm 137 mm 900 mm 133 mm 137 mm 900 mm 133 mm 137 mm Exit Button Interface Stand Pole with QR Code Scanner 12V GND 485+ 485- Stand Pole with Exit Button Stand Pole with Card Reader RS-485 Interface 12V GND 485+ 485- 12V GND 485+ 485- The cables can be connected to the RS-485 interface of turnstiles or other access controller according to the definition. The 24AWG/0.75mm² cable length is 4.5 m in total including reserved length of 3 m. Stand Pole with Card Receiver RS-485 Interface RS-232 Interface 12V 12V 12V 12V 12V 12V GND GND 232_TX 232_TX 485+ 485+ 232_RX 232_RX 485- 485- GND GND GND GND The stand pole with card receiver contains card reader cables, card receiver cables and light board cables. Connect the cables to turnstiles or other access controller according to the definition. The 24AWG/0.75mm² cable length is 4.5 m each in total including reserved length of 3 m. Power Interface ©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. RS-485 Interface 12V GND 485+ 485- Card Reader Card Receiver Indicator The cables can be connected to the exit button interface of turnstiles or other access controller. The exit button remains open by default. The 24AWG/0.75mm² cable length is 2.3 m in total including reserved length of 1 m. The cables can be connected to the RS-485 interface of turnstiles or other access controller according to the definition. The 24AWG/0.75mm² cable length is 4.5 m in total including reserved length of 3 m. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection aga…

Text truncated - open the document above for the full version.

Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2022-10-28 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-K7CRT01E To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Title: Testing & Certification Engineer Signature: On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825

Hangzhou Hikvision Digital Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Regarding: Confidentiality Request regarding application for FCC ID: 2ADTD-K7CRT01E LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. Address No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Grantee Code 2ADTD FCC ID 2ADTD-K7CRT01E Authorized Contact Name Long Cheng Contact Email [email protected] Contact Phone +8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2022-10-28 Print Name: Long Cheng Title: Testing & Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 External Photos for SHCR2210002300AT SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4

Label: Label location: Location

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 19 Internal Photos for SHCR2210002300AT SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 19 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 5 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 6 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 7 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 8 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 9 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 10 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 11 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 12 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 13 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 14 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 15 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 16 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 17 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 18 of 19 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 19 of 19

125kHz Antenna Specification Antenna Manufacturer/address: Hangzhou Hikvision Digital Technology Co., Ltd./ No.555 Qianmo Road, Binjiang District Hangzhou 310052, China Antenna Type: Loop Antenna Name: H2001 REV1.0 Antenna Figure:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR221000230001 Page: 1 of 23 Parlam Zhan Laboratory Manager TEST REPORT Application No.: SHCR2210002300AT FCC ID: 2ADTD-K7CRT01E Applicant: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Applicant: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Manufacturer: Hangzhou Hikvision Digital Technology Co., Ltd. Address of Manufacturer: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Factory: 1, Hangzhou Hikvision Technology Co., Ltd. 2, Hangzhou Hikvision Electronics Co., Ltd. 3, Chongqing Hikvision Technology Co., Ltd., 4, WuHan Hikvision Technology Co. Ltd Address of Factory: 1, No.700,Dongliu Road, Binjiang District, Hangzhou City,Zhejiang, 310052, China 2, No.299,Qiushi Road,Tonglu Economic Development Zone,Tonglu County, Hangzhou,Zhejiang, 311500,China. 3, NO.118.Haikang Road,Area C,Jianqiao Industrial Park,Dadukou District, Chongqing,401325,China. 4, No. 12, Wenhua Road, Zhifang Street, Jiangxia District, Wuhan City Equipment Under Test (EUT): EUT Name: Stand Pole Model No.: DS-K7CRT01/E Standard(s) : 47 CFR Part 15, Subpart C 15.209 Date of Receipt: 2022-10-30 Date of Test: 2022-10-31 to 2022-11-02 Date of Issue: 2022-11-02 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR221000230001 Page: 2 of 23 Revision Record Version Description Date Remark 00 Original 2022-11-02 / Authorized for issue by: Bill Wu/Project Engineer Parlam Zhan/Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR221000230001 Page: 3 of 23 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.209 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.209 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.209 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Radiated Emissions (9kHz-30MHz) 47 CFR Part 15, Subpart C 15.209 ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 Pass Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart C 15.209 ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 Pass SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR221000230001 Page: 4 of 23 3 Contents Page 1 COVER PAGE ............................................................................................................................................. 1 2 TEST SUMMARY ......................................................................................................................................... 3 3 CONTENTS .................................................................................................................................................. 4 4 GENERAL INFORMATION ......................................................................................................................... 5 4.1 DETAILS OF E.U.T. ................................................................................................................................ 5 4.2 DESCRIPTION OF SUPPORT UNITS........................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ................................................................................................................ 5 4.4 TEST LOCATION ..................................................................................................................................... 6 4.5 TEST FACILITY ....................................................................................................................................... 6 4.6 DEVIATION FROM STANDARDS ................................................................................................................ 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6 5 EQUIPMENT LIST ....................................................................................................................................... 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ................................................................................... 8 6.1 ANTENNA REQUIREMENT ........................................................................................................................ 8 7 RADIO SPECTRUM MATTER TEST RESULTS ........................................................................................ 9 7.1 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) .............................................................. 9 7.2 20DB BANDWIDTH ................................................................................................................................ 13 7.3 RADIATED EMISSIONS (9KHZ-30MHZ) .................................................................................................. 15 7.4 RADIATED EMISSIONS (30MHZ-1GHZ) ................................................................................................. 19 8 TEST SETUP PHOTOGRAPHS ................................................................................................................ 23 9 EUT CONSTRUCTIONAL DETAILS ......................................................................................................... 23 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR221000230001 Page: 5 of 23 4 General Information 4.1 Details of E.U.T. Power supply: DC 12V 1A Test voltage: AC 120V/60Hz Antenna Type: Loop Antenna Modulation Type: ASK Number of Channels: 1 Operation Frequency: 125kHz 4.2 Description of Support Units The EUT has been tested as …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 3 Appendix Photographs of Test Setup for SHCR2210002300AT Test Model No.: DS-K7CRT01/E SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 3 Test Setup Photo Conducted Emissions at Mains Terminals (150kHz-30MHz) Radiated Emissions (30MHz-1GHz) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 3 Radiated Emissions (9kHz-30MHz)