2ADUL0053Body Fat Scale

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Grea ter Goods, LLC Address 4427 Choutea u Ave. St. Louis Missouri 63110 United Sta tes FRN 0024158743 Grantee Code 2ADUL FCC ID: 2ADUL0053 Authorized Contact Name Christopher Chupp Contact Phone 3149918494, Ext: 33 Contact Email cchupp@grea tergoods.com I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2026-05-13 Print Name: Christopher Chupp Title: Owner *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Greater Goods, LLC Address 4427 Chouteau Ave. St. Louis Missouri 63110 United States FRN 0024158743 Grantee Code 2ADUL FCC ID: 2ADUL0053 Authorized Contact Name Christopher Chupp Contact Phone 3149918494, Ext: 33 Contact Email [email protected] We certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 2026-05-13 Print Name: Christopher Chupp Title: Owner *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2026/05/13 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Greater Goods, LLC Company Name: Greater Goods, LLC FRN: 0024158743 FRN: 0024158743 Grantee Code: 2ADUL Contact Name: Christopher Chupp Contact Name Christopher Chupp Address: 4427 Chouteau Ave. St. Louis Missouri 63110 United States Address: 4427 Chouteau Ave. St. Louis Missouri 63110 United States Telephone: 3149918494, Ext: 33 Telephone: 3149918494, Ext: 33 Fax: 3149917988 Fax: 3149917988 Email: [email protected] Email: [email protected] Regarding: FCC ID: 2ADUL0053 We, < Greater Goods, LLC > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Greater Goods, LLC > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant / U.S. designated agent Name (Printed): Christopher Chupp Title: Owner Signature:

Greater Goods, LLC Date: 2026/05/13 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADUL0053 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Greater Goods, LLC This authorization is valid until further written notice from the applicant. Print Name: Christopher Chupp Title: Owner Signature: On behalf of Company: Greater Goods, LLC Telephone: 3149918494, Ext: 33 E-mail: [email protected]

Greater Goods, LLC TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2ADUL0053 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Christopher Chupp Title: Owner Signature: On behalf of Company: Greater Goods, LLC Telephone: 3149918494, Ext: 33 E-mail: [email protected]

(01)00875011000536(11)260420(21)FA0000000001(01)00875011000536(11)260420(21)FA0000000120

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165703 Page: 1 of 10 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2604001657ME Applicant: Greater Goods, LLC Address of Applicant: 4427 Chouteau Ave. St. Louis, Missouri, 63110 United States Manufacturer: Guangdong Welland Technology Co., Ltd Address of Manufacturer: No. 7 Minke East Road, Minying Science & Technology Park, Shiqi, Zhongshan, Guangdong, China Factory: Guangdong Welland Technology Co., Ltd Address of Factory: No. 7 Minke East Road, Minying Science & Technology Park, Shiqi, Zhongshan, Guangdong, China Equipment Under Test (EUT): EUT Name: Body Fat Scale Model No.: 0053, 0063   Please refer to section 3.1 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: 2ADUL0053 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-04-21 Date of Evaluation: 2026-04-22 to 2026-05-28 Date of Issue: 2026-05-28 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165703 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2026-05-28 Original Authorized for issue by: Edison Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165703 Page: 3 of 10 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Details of E.U.T. ........................................................................................................................... 4 3.3 Separation Distance ..................................................................................................................... 4 3.4 Test Location ............................................................................................................................... 5 3.5 Test Facility .................................................................................................................................. 5 3.6 Deviation from Standards ............................................................................................................. 5 3.7 Abnormalities from Standard Conditions ....................................................................................... 5 4 FCC Radiofrequency radiation exposure limits ................................................................................ 6 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 6 4.2 MPE-based Exemption ................................................................................................................. 6 4.3 SAR-based Exemption ................................................................................................................. 7 4.4 RF Exposure Test Exemptions for Simultaneous Transmission..................................................... 9 5 Measurement and Calculation ..........................................................................................................10 5.1 Maximum transmit power ............................................................................................................10 5.2 RF Exposure Calculation .............................................................................................................10 6 EUT Constructional Details (EUT Photos) ........................................................................................10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165703 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: DC 6V(DC 1.5V 4*1.5V AAA battery) Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.1 Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data rate: 1Mbps, 2Mbps Antenna Type: PCB Antenna Antenna Gain: -1.17dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Remark: Model No.: 0053, 0063 Only the model 0053 was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on model No. and appearance and. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165703 Page: 5 of 10 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057.…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165702 Page: 1 of 68 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2604001657ME Applicant: Greater Goods, LLC Address of Applicant: 4427 Chouteau Ave. St. Louis, Missouri, 63110 United States Manufacturer: Guangdong Welland Technology Co., Ltd Address of Manufacturer: No. 7 Minke East Road, Minying Science & Technology Park, Shiqi, Zhongshan, Guangdong, China Factory: Guangdong Welland Technology Co., Ltd Address of Factory: No. 7 Minke East Road, Minying Science & Technology Park, Shiqi, Zhongshan, Guangdong, China Equipment Under Test (EUT): EUT Name: Body Fat Scale Model No.: 0053, 0063   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: 2ADUL0053 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-04-21 Date of Test: 2026-04-22 to 2026-05-28 Date of Issue: 2026-05-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165702 Page: 2 of 68 Revision Record Version Chapter Date Modifier Remark 01 2026-05-28 Original Authorized for issue by: Edison Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165702 Page: 3 of 68 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Remark: Model No.: 0053, 0063 Only the model 0053 was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on model No. and appearance and. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260400165702 Page: 4 of 68 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 6 4.4 Test Location ............................................................................................................................... 7 4.5 Test Facility .................................................................................................................................. 7 4.6 Deviation from Standards ............................................................................................................. 7 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Equipment List ................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..........................................................................................10 6.1 Antenna Requirement .................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 Radio Spectrum Matter Test Results ................................................................................................11 7.1 Radiated Emissions which fall in the restricted bands ..................................................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Mode Description ........................................................................................…

Text truncated - open the document above for the full version.

Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 TIME:2026/04/21 Shenzhen DBT Telecommunication Technology CO.,LTD Client: Guangdong Welland Technology Co., Ltd. Project：FI2611WB Antenna standard：BLE Antenna Testing Report Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 OTA-800 Brand：ETS Frequency range ：370MHz-8.5GHz Features ： passive,active test; G Net, C Net, 2 G/3G/4G, WIFI and BT, TRP, TIS test 5071C Brand ： Agilent Frequency range：9KHz-8.5GHz Features ： 2G/3G/4G/BT/WIFI antenna compre hensive passive test 8960 Brand ： Agilent Frequency range：292MHz-2700GHz Features ： 2G/3G avtive test CMW500 Brand ： Rohde & Schwarz Frequency range：70KHz-6GHz Features ： 2G/3G/4G/BT/WIFI/NB-Lot antenna comprehensive passive test 1. Test Equipment Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 Antenna RF Module E1 E2 E3 Element 2.4 G E1 1 PF E2 5.1 NH E3 0.5 PF The matching circuit has been modified. 2 .Matching Circuit Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 Freq Effi Gain (MHz) (%) (dBi) 2400 32.2 -1.22 2410 31.52 -1.3 2420 30.05 -1.5 2430 31.91 -1.17 2440 29.23 -1.43 2450 29.49 -1.25 2460 26.17 -1.59 2470 26.77 -1.28 2480 26.39 -1.29 2490 23.88 -1.66 2500 24.44 -1.69 3.Test Data Shenzhen DBT Telecommunication TechnologyCO.,LTD R&D Department 让人人分享优质通讯 4 .Passive Data Shenzhen DBT Telecommunication Technology CO.,LTD R&D Department 让人人分享优质通讯 Shenzhen DBT Telecommunication Technology Co.,LTD . was established in October 2008. With a research and development laboratory spanning 1,000 square meters, it is a high-tech enterprise that integrates the R&D, production, sales, and service of communication antennas. Focusing on wireless mobile communication technology and contactless mobile payment technology, its main products include internal antennas for wireless mobile devices (such as mobile phones, POS terminals, PDAs, and mobile PCs) and NFC contactless mobile payment antennas. In addition to selling mobile terminal antenna products, the company also provides customers with RF Company Introduction Contract Information ： TELL ： 0755-83763273 FAX ： 0755-83763348 Email ： [email protected] Address: Building 8, Building 505, Yungu Phase II, Pingshan 1st Road, Xili Town, Nanshan District, Shenzhen : wireless performance testing and solutions for complete mobile devices. The company is equipped with state-of-the-art instruments and facilities, as well as plastic and metal mold s hops, providing customers with an excellent platform for antenna hardware R&D. Guided by its corporate philosophy of “integrity in business and quality first,” Dibitong provides its customers with high-quality products and unwavering service. Company Vision: To enable everyone to enjoy high-quality communication.