2ADWV-CMB-5B215Mobile Booster

1 5 Band WIRELESS 4G/LTE Consumer Mobile 50dB Booster USER MANUAL Model # CMB- 5B215 FCC ID: 2ADWV-CMB-5B215 IC: 9176A-CMB-5B215 Proudly Designed Developed & Manufactured in the United States 2 Sugarland Holdings Group LLC has a sincere belief, and appreciates the FCC and the network operators’ commitment to helping the booster manufacturers create standards that would protect the carrier’s networks so the booster would provide superior service Sugarland Holdings Group LLC is proud to not manufacture boosters prematurely for profit or release a booster and only until we were 100% confident the booster would provide the customer with excellent reception and fast data speeds for up to twelve users at a time. All Sugarland Holdings Group LLC products are designed and manufactured to the highest standards possible, which will exceed your expectations while using your Consumer Mobile 50dB Wireless 4G/LTE Booster. By following the simple instructions within in this manual, you will be assured not to cause adverse effects on any carrier’s network and receive the strongest signals possible. Sugarland Holdings Group LLC designs all of its products for simple setup and ease of use. We hope you will enjoy all of our products. The Sugarland Holdings Group Installation Manual Contents A Message from Us 2 Contents 2 Warnings 3 Booster Installation Overview 4 Selecting location for your device 5 Installing the Outside Antenna in Automobiles & Small Trucks 6 Installing the Outside Antenna in RV’s & Large Trucks 7 7 Installing the Interior Antenna in Automobiles & Small Trucks 8 8 Installing the Interior Antenna in RV’s & Large Trucks 9 9 Powering Up Your Wireless 4G/LTE Cellular Booster 10 Warranty 11 Kitting Options / Technical Specifications 12 10 3 The term “IC” before the radio certification number indicates that the Industry Canada technical specifications were met. The term “FCC” before the radio certification number indicates the Federal Communication Commission technical specifications were met. WARNINGS USING THIS CONSUMER DEVICE • BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. • If you are unsure, contact your provider. • You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20cm (8 inches) from any person. • You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. • WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device. You are cautioned that changes or modifications not expressly approved by the FCC will void your authority to operate the equipment and will make your booster inoperable. • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. • FCC regulations require that only antennas connected to this device during FCC testing be used and cannot exceed a certain dBi rating. Any user changing antennas to a higher dBi rating then included in your purchase will violate FCC regulations, and will result in your warranty being voided and will make your booster inoperable. • No exterior antenna can be used with this Booster that is not listed on this manual will violate FCC regulations, and will result in your warranty being voided and will make your booster inoperable. • No Interior antenna can be used with this Booster that is not listed in this manual will violate FCC regulations, and will result in your warranty being voided and will make your booster inoperable. • The use of any power supply other than the one supplied by Sugarland Holdings Group may damage your Booster and will void your warranty and will make your booster inoperable. 4 WIRELESS BOOSTER INSTALLATION OVERVIEW Before installing your new Consumer Mobile 50dB Wireless 4G/LTE Booster, We recommend you need to read the entire instruction guide and follow all of the instructions listed in the manual. There are important safety and operating information guidelines to insure proper performance of your device. Failure to do so could be hazardous to you and the surrounding networks you are using. This could result in damaging your device, and void your warranty and be in violation with the FCC and may make your booster inoperable. After reading the entire instruction manual and before actually installing your Consumer Mobile 50dB Wireless 4G/LTE Booster, we strongly recommend that you search out, measure and make certain each component of the overall system will work. This will avoid unnecessary problems with your installation (i.e. reinstalling a component, having to rewire a component etc.), and will result in a positive and efficient experience with this device. 5 DECIDING ON A PROPER LOCATION FOR YOUR WIRELESS BOOSTER Before selecting a suitable location for your new Sugarland Holdings Group Consumer Mobile 50dB Wireless 4G/LTE Booster inspect the three items needed for installation. There are three cable lengths you must be aware of, as the wireless Booster must be located within the cable lengths of the supplied items. Extending any cable length is prohibited and will result in your warranty being voided, violate FCC regulations, and will make your booster inoperable. 1. 10ft Interior Antenna cable 2. 12ft Exterior Antenna Mount Base cable 3. 4ft Power Cable WARNING Over tightening the antenna cable connector to the Booster may damage the Booster thus voiding your warranty and make the booster inoperable. 6 EXTERNAL ANTENNA INSTALLATION This Consumer Mobile 50dB Wireless 4G/LTE Booster utilizes antennas that requires a horizontal se…

Text truncated - open the document above for the full version.

April 5, 2015 Attestation for Sugarland Holding Booster FCC ID: 2ADWV-­‐‑CMB-­‐‑5B215 To Whom It May Concern: 1) Each Signal Booster manufactured under FCC ID 2ADWV-­‐‑CMB-­‐‑5B215 is ensured to be FCC compliant and is certified to be compliant. 2) This consumer booster is not user programmable, does not require fine-­‐‑tuning, adjustments, or require professional installation. However, in the case the booster needs to self adjust to be compliant to NPS compliance or safeguard requirements as described in the User Manual, we have built in “fail-­‐‑safe” guards, as they will not allow the booster to be non-­‐‑compliant to NPS compliance or safeguard requirements. 3) Future software upgrades will not cause non-­‐‑compliance. 4) NPS and other compliance/safeguard features cannot be field reconfigured, disabled or removed and does not require professional installation. 5) NPS and other compliance and safeguard features have been implemented. NPS and other compliance/safeguard features are defaulted to be “On” in operation at all times. Sincerely, Robert Skilton Robert Skilton Compliance Coordinator [email protected]

May 4, 2015 Compliance Testing LLC 1724 S. Nevada Way Mesa, AZ 85204 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Diana Williams and Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug use Act of 1988, 21 U.S.C.853(a). Sincerely, Robert Skilton Robert Skilton Compliance Coordinator [email protected] Confidential and Proprietary Information “Not to be Disseminated”

Long Term Confidentiality Request Letter 5/5/2015 Compliance Testing LLC 1724 S. Nevada Way Mesa, AZ 85204 RE: CONFIDENTIALITY REQUEST FOR CMB-5B215, FCC ID: 2ADWV-CMB-5B215 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the following documents required to be submitted with this application be permanently withheld from public review.  Block Diagram  Schematics  Theory of Operation  Parts List  Tune Up Procedure These documents contain detailed system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Robert Skilton Robert Skilton Compliance Coordinator [email protected] Confidential and Proprietary Information “Not to be Disseminated”

Short Term Confidentiality Request Letter 5/5/2015 Compliance Testing LLC 1724 S. Nevada Way Mesa, AZ 85204 RE: Short Term Confidentiality Request For CMB-5B215, FCC ID: 2ADWV-CMB-5B215 To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, Sugarland Holding Group, LLC. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. 1. Test setup photos 2. External photos 3. Internal photos 4. User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Grantee will not market or distribute product during the period requested. Once product is available for marketing, Grantee will notify FCC or TCB. Please contact me if there is any information you may need. Sincerely, Robert Skilton Robert Skilton Compliance Coordinator [email protected] Confidential and Proprietary Information “Not to be Disseminated”

1 February 17th, 2015 Subject: Antenna Kitting FCC ID: 2ADWV-CMB215 The antenna options for Sugarland Holdings Group LLC signal booster FCC model FCC ID: 2ADWV- CMB215 were tested for (11) Internal antenna kitting options and (12) External antenna kitting options for sale with this booster. The kitting options for interior and exterior antennas are listed below Robert Skilton Robert Skilton Compliance Coordinator [email protected] Mobile External Antenna Kitting Configurations Mobile Internal Antenna Kitting Configurations 1. EMM- 6321 Magnetic Mount w/12ft RG58 Cable 1. IBA - 0321 Blade w/ 10ft RG 174 Cable 2. ELPN - 5822 Low Profile w/ 12 ft RG 174U Cable 2. IPA - 0544 Patch w/10 ft RG 174 Cable 3. EWM - 4323 Window Mount w/10ft RG 58 Cable 3. ILPOA - 1954 Low Profile Omni w/25ft RG 58 Cable 4. E4MM - 6324 Magnetic Mount V2 w/12 ft cable 4. IDC -7972 Direct Connect (no cable) 5. EHPMM - 5856 HP Low Profile w/12 ft RG174U Cable 5. IDA - 9953 Dome Omni w/25ft RG 58 Cable 6. ETA - 3162 Trucker w/ 10ft RG58 Cable 6. IDA2 - 9969 Dome v2 Omni w/25ft RG 58 Cable 7. ESTA - 3122 Trucker V2 W/15ft RG58 Cable Fixed External Antenna Kitting Configurations Fixed Internal Antenna Kitting Configurations 1. FY9E - 7230 Yagi w/ 25ft RG 58 cable 1. IPA - 8734 Panel Directional w/ 50ft RG 58 2. FY14E - 7231 Yagi V2 w/ 25ft RG 58 cable 2. IPA- 0544 Panel V2 Directional w/ 50ft RG 58 3. O32A - 8882 Omni Directional w/ 25ft RG 58 cable 3. IDA - 9953 Dome Omni w/ 25ft RG58 4. O18A - 8889 Omni Directional V2 w/ 25ftRG 58 cable 4. IDA2 - 9969 Dome V2 Omni w/ 25ft RG58 5. O8A - 8883 Omni Directional V3 w/ 25ft RG 58 cable 5. IDC -7972 Direct Connect (no cable) 2 Conducted Output & Gain Power Uplin / Downlink Frequency (MHz) 698-716 776-787 824-849 1710- 1755 1850-1915 Downlink Output Power (dBm) 14.90 15.24 15.44 16.01 11.65 Uplink Output Power (dBm) 26.51 25.51 25.25 25.64 25.32 Measured Up-Link Gain (dB) 49.11 49.27 49.15 49.04 48.82 Up-Link Frequency Band (MHz) 698-716 777-787 824-849 1710- 1755 1850-1915 Measured Up-Link Gain (dB) 49.11 49.27 49.15 49.04 48.82 Measured RSSI Shut-Off (dBm/MHz) -53.00 -53.00 -50.00 -46.00 -50.00 MSCL Minimum (dB) 29.68 30.56 31.14 37.47 38.19 1.5' Seperation Distance Path Loss (dB) 22.68 23.56 24.14 30.47 31.19 Polarity Loss 3.00 3.00 3.00 3.00 3.00 Max Antenna Gain Less Cable Loss (dB) 0.88 0.73 0.75 0.96 1.18 Up-Link Frequency Band (MHz) 698-716 777-787 824-849 1710- 1755 1850-1915 Measured Up-Link Gain (dB) 49.11 49.27 49.15 49.04 48.82 Measured RSSI Shut-Off (dBm/MHz) -53.00 -53.00 -50.00 -46.00 -50.00 MSCL Minimum (dB) 41.70 42.57 43.15 49.48 50.20 6.0' Seperation Distance Path Loss (dB) 34.70 35.57 36.15 42.48 43.20 Polarity Loss 3.00 3.00 3.00 3.00 3.00 Max Antenna Gain Less Cable Loss (dB) 0.88 0.73 0.75 0.96 1.18 Conducted Downlink / Uplink Power Uplink / Downlink Frequency (MHz) 698-716 776-787 824-849 1710- 1755 1850-1915 Downlink Output Power (dBm) 26.51 25.51 25.25 25.64 25.32 Uplink Output Power (dBm) 14.90 15.24 15.44 16.01 11.65 3 Mobile External Kitting Configurations 1. EMM- 6321 Magnetic Mount w/12ft RG58 DS Cable Antenna Gain (dBI) 2.12 1.34 1.47 2.21 3.77 Coax Cable Loss (dB) 2.88 4.31 3.91 3.97 3.54 Final Antenna Gain less Loss (dB) -0.76 -2.97 -2.44 -1.76 0.23 Downlink Output Power EIRP (dBm) 25.75 22.54 22.81 23.88 25.55 Uplink Output Power EIRP (dBm) 14.14 12.27 13.00 14.25 11.88 2. ELPN - 5822 Low Profile w/12 ft RG 58 DS Cable Antenna Gain (dBI) 1.23 1.54 1.77 2.56 3.99 Coax Cable Loss (dB) 2.71 4.21 3.77 3.61 3.93 Final Antenna Gain less Loss (dB) -1.48 -2.67 -2 -1.05 0.06 Downlink Output Power EIRP (dBm) 25.03 22.84 23.25 24.59 25.38 Uplink Output Power EIRP (dBm) 13.42 12.57 13.44 14.96 11.71 3. EWM - 4323 Window Mount w/12ft RG 58 Cable Antenna Gain (dBI) 2.19 2.72 3.88 3.34 2.47 Coax Cable Loss (dB) 3.71 3.21 2.98 2.87 3.65 Final Antenna Gain less Loss (dB) -1.52 -0.49 0.9 0.47 -1.18 Downlink Output Power EIRP (dBm) 24.99 25.02 26.15 26.11 24.14 Uplink Output Power EIRP (dBm) 13.38 14.75 16.34 16.48 10.47 4. E4MM - 6324 Magnetic Mount V2 w/12 ft RG 58 Cable Antenna Gain (dBI) 3.88 3.71 2.88 4.59 5.01 Coax Cable Loss (dB) 2.86 4.32 3.87 4.01 3.61 Final Antenna Gain less Loss (dB) 1.02 -0.61 -0.99 0.58 1.40 Downlink Output Power EIRP (dBm) 27.53 24.9 24.26 26.22 26.72 Uplink Output Power EIRP (dBm) 15.92 14.63 14.45 16.59 13.05 5. EHPMM - 5856 HP Low Profile w/10 ft RG174 DS Cable Antenna Gain (dBI) 2.21 2.22 2.56 3.87 4.01 Coax Cable Loss (dB) 2.43 2.77 3.24 3.57 3.66 Final Antenna Gain less Loss (dB) -0.22 -0.55 -0.68 0.30 0.35 Downlink Output Power EIRP (dBm) 26.29 24.96 24.57 25.94 25.67 Uplink Output Power EIRP (dBm) 14.68 14.69 14.76 16.31 12.00 4 6. ETA - 3162 Trucker Antenna w/ 12ft RG58 DS Cable Antenna Gain (dBI) 5.93 5.54 4.29 3.60 2.11 Coax Cable Loss (dB) 3.87 3.57 3.34 2.76 2.88 Final Gain less Loss (dB) 2.06 1.97 0.95 0.84 -0.77 Downlink Output Power EIRP (dBm) 28.57 27.48 26.2 26.48 24.55 Uplink Output Power EIRP (dBm) 16.96 17.21 16.39 16.85 10.88 7. ESTA - 3122 Trucker V2 W/12ft RG58 DS Cable Antenna Gain (dBI) 3.13 3.99 3.92 2.88 3.09 Coax Cable Loss (dB) 3.78 3.32 3.67 4.39 3.34 Final Gain less Loss (dB) -0.65 0.67 0.25 -1.51 -0.25 Downlink Output Power EIRP (dBm) 25.86 26.18 25.5 24.13 25.07 Uplink Output Power EIRP (dBm) 14.25 15.91 15.69 14.50 11.40 Fixed External Kitting Configurations 1. FY9E - 7230 Yagi Antenna w/ 25ft RG 58 cable Antenna Gain (dBI) 5.61 5.93 6.77 6.97 6.01 Coax Cable Loss (dB) 5.82 6.31 5.72 6.33 4.21 Final Gain less Loss (dB) -0.21 -0.38 1.05 0.64 1.8 Downlink Output Power EIRP (dBm) 26.3 25.13 26.3 26.28 27.12 Uplink Output Power EIRP (dBm) 14.69 14.86 16.49 16.65 13.45 2. FY14E - 7231 Yagi Antenna V2 w/ 25ft RG 58 cable Antenna Gain (dBI) 7.22 6.87 8.99 5.84 6.29 Coax Cable Loss (dB) 5.72 6.29 6.00 6.13 4.53 Final Gain less Loss (dB) 1.5 0.58 2.99 -0.29 1.76 Downlink Output Power EIRP (dBm) 28.01 26.09 28.24 25.35 27.08 Uplink Output Power EIRP (dBm) 16.40 15.82 18.43 15.72 13.41 3. O32A - 8882 Omni Ant…

Text truncated - open the document above for the full version.

Form: CB-7.2.1 Issued by: QM Issue Date: 9/22/2011 Page 1 of 1 Revised by: QM-JS Revised Date: 6/23/2014 L:\Project\2015\p1520007-Airgoon L\TCB Folder\RT's\CB-7.2.1 - Technical Review RT Form.docx CB-7.2.1 – Technical Review RT Form FCC ID: 2ADWV-CMB-5B215 IC ID: 9176A-CMB-5B215 CT Project: P1520007 From: Shawn McMillen Date: 05/06/2015 1--No radiated test setup photos have been provided. AR: Provided. 2--The FCC ID in the EMC report does not match that of the label provided. AR: Provided. 3--The CB-750 form is incomplete. DW: Actioned Greg to complete. CT - Response by: Submitted by: Date:

Mobile External Antenna Kitting ConfigurationsMobile Internal Antenna Kitting Configurations 1. EMM- 6321 Magnetic Mount w/12ft RG58 Cable1. IBA - 0321 Blade w/ 10ft RG 174 Cable 2. ELPN - 5822 Low Profile w/ 12 ft RG 174U Cable 2. IPA - 0544 Patch w/10 ft RG 174 Cable 3. EWM - 4323 Window Mount w/10ft RG 58 Cable3. ILPOA - 1954 Low Profile Omni w/25ft RG 58 Cable 4. E4MM - 6324 Magnetic Mount V2 w/12 ft cable 4. IDC -7972 Direct Connect (no cable) 5. EHPMM - 5856 HP Low Profile w/12 ft RG174U Cable 5. IDA - 9953 Dome Omni w/25ft RG 58 Cable 6. ETA - 3162 Trucker w/ 10ft RG58 Cable6. IDA2 - 9969 Dome v2 Omni w/25ft RG 58 Cable 7. ESTA - 3122 Trucker V2 W/15ft RG58 Cable Fixed External Antenna Kitting ConfigurationsFixed Internal Antenna Kitting Configurations 1. FY9E - 7230 Yagi w/ 25ft RG 58 cable1. IPA - 8734 Panel Directional w/ 50ft RG 58 2. FY14E - 7231 Yagi V2 w/ 25ft RG 58 cable2. IPA- 0544 Panel V2 Directional w/ 50ft RG 58 3. O32A - 8882 Omni Directional w/ 25ft RG 58 cable3. IDA - 9953 Dome Omni w/ 25ft RG58 4. O18A - 8889 Omni Directional V2 w/ 25ftRG 58 cable4. IDA2 - 9969 Dome V2 Omni w/ 25ft RG58 5. O8A - 8883 Omni Directional V3 w/ 25ft RG 58 cable5. IDC -7972 Omni Up-Link Frequency Band (MHz)698-716777-787824-8491710-17551850-1915 MSCL Minimum (dB)28.7028.2126.8832.6031.80 1.5' Seperation Distance Path Loss (dB)22.7023.6024.1030.5031.20 Polarity Loss3.003.003.003.003.00 Max Antenna Gain Less Cable Loss (dB)-3.00-1.610.220.902.40 Conducted Uplink Power Uplink Frequency (MHz) 698-716776-787824-8491710-17551850-1915 Uplink Output Power (dBm) 26.5125.5725.2525.6425.32 Downlink Output Power (dBm) 14.9015.2415.4416.0111.65 Mobile External Kitting Configurations 1. EMM- 6321 Magnetic Mount w/12ft RG58 DS Cable Antenna Gain (dBI) 2.121.341.472.213.77 Coax Cable Loss (dB) 2.884.313.913.973.54 Final Antenna Gain less Loss (dB) -0.76-2.97-2.44-1.760.23 Uplink Output Power EIRP (dBm) 25.7522.6022.8123.8825.55 Downlink Output Power EIRP (dBm)14.1412.2713.0014.2511.88 2. ELPN - 5822 Low Profile w/12 ft RG 58 DS Cable Antenna Gain (dBI) 1.231.541.772.563.99 Coax Cable Loss (dB) 2.714.213.773.613.93 Final Antenna Gain less Loss (dB) -1.48-2.67-2.00-1.050.06 Uplink Output Power EIRP (dBm) 25.0322.9023.2524.5925.38 Downlink Output Power EIRP (dBm)13.4212.5713.4414.9611.71 3. EWM - 4323 Window Mount w/12ft RG 58 Cable Antenna Gain (dBI) 2.192.723.383.342.47 Coax Cable Loss (dB) 3.713.212.982.873.65 Final Antenna Gain less Loss (dB) -1.52-0.490.400.47-1.18 Uplink Output Power EIRP (dBm) 24.9925.0825.6526.1124.14 Downlink Output Power EIRP (dBm)13.3814.7515.8416.4810.47 4. E4MM - 6324 Magnetic Mount V2 w/12 ft RG 58 Cable Antenna Gain (dBI) 3.883.712.884.595.01 Coax Cable Loss (dB) 2.864.323.874.013.61 Final Antenna Gain less Loss (dB) 1.02-0.61-0.990.581.40 Uplink Output Power EIRP (dBm) 27.5324.9624.2626.2226.72 Downlink Output Power EIRP (dBm)15.9214.6314.4516.5913.05 5. EHPMM - 5856 HP Low Profile w/10 ft RG174 DS Cable Antenna Gain (dBI) 2.212.222.563.874.01 Coax Cable Loss (dB) 2.432.773.243.573.66 Final Antenna Gain less Loss (dB) -0.22-0.55-0.680.300.35 Uplink Output Power EIRP (dBm) 26.2925.0224.5725.9425.67 Downlink Output Power EIRP (dBm)14.6814.6914.7616.3112.00 6. ETA - 3162 Trucker Antenna w/ 12ft RG58 DS Cable Antenna Gain (dBI) 5.935.543.673.602.11 Coax Cable Loss (dB) 3.873.883.342.762.88 Final Gain less Loss (dB) 2.061.660.330.84-0.77 Uplink Output Power EIRP (dBm) 28.5727.2325.5826.4824.55 Downlink Output Power EIRP (dBm)16.9616.9015.7716.8510.88 7. ESTA - 3122 Trucker V2 W/12ft RG58 DS Cable Antenna Gain (dBI) 3.133.993.922.883.09 Coax Cable Loss (dB) 3.783.323.674.393.34 Final Gain less Loss (dB) -0.650.670.25-1.51-0.25 Uplink Output Power EIRP (dBm) 25.8626.2425.524.1325.07 Downlink Output Power EIRP (dBm)14.2515.9115.6914.5011.40 Fixed External Kitting Configurations 1. FY9E - 7230 Yagi Antenna w/ 50ft RG 58 cable Antenna Gain (dBI) 5.615.126.776.976.01 Coax Cable Loss (dB) 6.296.817.777.918.18 Final Gain less Loss (dB) -0.68-1.69-1.00-0.94-2.17 Uplink Output Power EIRP (dBm) 25.8323.8824.2524.723.15 Downlink Output Power EIRP (dBm)14.2213.5514.4415.079.48 2. FY14E - 7231 Yagi Antenna V2 w/ 25ft RG 58 cable Antenna Gain (dBI) 7.223.785.404.845.57 Coax Cable Loss (dB) 4.975.395.553.953.45 Final Gain less Loss (dB) 2.25-1.61-0.150.892.12 Uplink Output Power EIRP (dBm) 28.7623.9625.1026.5327.44 Downlink Output Power EIRP (dBm)17.1513.6315.2916.9013.77 3. O32A - 8882 Omni Antenna w/ 50ft RG 58 cable Antenna Gain (dBI) 3.884.623.965.045.98 Coax Cable Loss (dB) 6.296.817.777.918.18 Final Gain less Loss (dB) -2.41-2.19-3.81-2.87-2.2 Uplink Output Power EIRP (dBm) 24.123.3821.4422.7723.12 Downlink Output Power EIRP (dBm)12.4913.0511.6313.149.45 4. O18A - 8889 Omni Directional V2 w/ 25ftRG 58 cable Antenna Gain (dBI) 4.653.634.873.043.92 Coax Cable Loss (dB) 4.975.234.483.893.45 Final Gain less Loss (dB) -0.32-1.600.39-0.850.47 Uplink Output Power EIRP (dBm) 26.1923.9725.6424.7925.79 Downlink Output Power EIRP (dBm)14.5813.6415.8315.1612.12 5. O8A - 8883 Omn Directional V3 w/ 25ft RG 58 cable Antenna Gain (dBI) 2.652.212.892.043.07 Coax Cable Loss (dB) 4.974.033.773.893.45 Final Gain less Loss (dB) -2.32-1.82-0.88-1.85-0.38 Uplink Output Power EIRP (dBm) 24.1923.7524.3723.7924.94 Downlink Output Power EIRP (dBm)12.5813.4214.5614.1611.27 Mobile Internal Kitting Configurations 1. IBA0321 Blade w/ 10ft RG 174 Cable Antenna Gain (dBI) 1.562.621.772.332.87 Coax Cable Loss (dB) 4.734.393.873.914.01 Final Gain less Loss (dB) -3.17-1.77-2.10-1.58-1.14 Uplink Output Power EIRP (dBm) 23.3423.823.1524.0624.18 Downlink Output Power EIRP (dBm)11.7313.4713.3414.4310.51 2. IPA0544 Patch w/10 ft RG 174 Cable Antenna Gain (dBI) 1.241.531.712.182.66 Coax Cable Loss (dB) 4.523.624.554.094.65 Final Gain less Loss (dB) -3.28-2.09-2.84-1.91-1.99 Uplink Output Power EIRP (dBm) 23.2323.4822.4123.7323.33 Downlink Output Power EIRP (dBm)11.6213.1512.6014.109.66 3. ILPOA1954 Low Profile Omni w/25ft RG 58 …

Text truncated - open the document above for the full version.

Sugarland Holdings Group LLC

SUGARLAND HOLDINGS GROUP LLC

1 March 26, 2015 Subject: MPE Calulations Re: FCC ID: 2ADWV-CMB-5B215 To Whom It May Concern: The MPE calculations for model CMB215 signal booster were generated for all frequency bands tested which were 700 MHz 800 MHz Band 1700/2100 MHZ Band 1900 MHZ Band All calculations were made for antenna kitted was calculated to show the worst case scenario for both the uplinks/downlinks that will be connected to the signal booster to include exterior and interior antennas. The order of the attached calculations are as follows: EIRP= Power Out (Watts)*Duty Cycle Percent*Antenna Gain (non‐log)*Coax loss (non‐log) The power density (mW/cm 2 ) is calculated using the following formula: Calculated Power Density=1000*EIRP (Watts)/(4*π*(Distance from Antenna (cm)^2)) A booster’s uplink power must not exceed 1 watt equivalent isotropic radiated power (EIRP) for each band of operation. Composite downlink power must not exceed 0.05 watt EIRP for each band of operation (20.21(e)(8)(i)(D)). The following formula was used to calculate the equivalent isotropic radiated Power. Exterior antennas: 1. 700MHz Bands 12,17 model# FY14E-7213 2. 700Mhz Band 13 model# ETB-3162 3.800 MHz Band 5 model# FY14E-7231 4. 1700/2100MH model #FY9E-7231 5. 1900MHz band 25 model# FY9E-7230 Interior antennas: 1. 700MHZ Bands 12,17, model#IPA-8734 2.700MHz Band 13 model#IPA-8734 3. 800MHz Band 5 model# IPA-8734 4. 1700/2100 MHz model# IPA-8734 5. 1900 MHz antenna model# IPA-8734. Sincerely, Robert Skilton Robert Skilton Compliance Coordinator [email protected] 2 SUBJECT: MPE Calculations RE: FCC ID: 2ADW-CMB-5215 Input Data: External Antenna Model Number used for Calculations : FY14E-7231 ETA-3162 FY14E-7231 FY9E-7230 FY9E-7230 Frequency / Up-Link ( MHz. ) : 698 - 716 776 - 787 824 - 849 1710 - 1755 1850 - 1910 Maximum Conducted RF Output Power (dBm.): 26.51 25.57 25.25 26.64 25.32 Maximum Conducted RF Output Power (mW.) : 447.713 360.579 334.965 461.318 340.408 Maximum Antenna Gain (dBi.) : 7.22 5.54 5.40 6.97 6.01 Coax Cable Loss (dB.) : 4.97 3.88 5.55 7.91 8.18 Net Antenna Gain ( Antenna Gain - Coax Cable Loss (dBi) : 2.25 1.66 -0.15 -0.94 -2.17 Distance from Antenna ( cm.) : 20 20 20 20 20 Effects of Ground Reflections Used: No No No No No Results of Calculations: Maximum Conducted RF Output Power (mW.) : 447.713 360.579 334.965 461.318 340.408 Net Antenna Gain ( Antenna Gain - Coax Cable Loss (dBi) : 2.25 1.66 -0.15 0.94 -2.17 Distance from Antenna ( cm. to ft.) : 0.656168 0.656168 0.656168 0.656168 0.656168 FCC Maximum RF Power Density ( mW / cm² ) : 0.47133 0.52133 0.55733 1.00000 1.00000 Calculated RF Power Density ( mW / cm² ) : 0.1495 0.1051 0.0644 0.0739 0.0411 3 Subject : MPE Calculations (cont.) RE: FCCID: 2ADWV-CMB-5215 Input Data: Internal Antenna Model Number used for Calculations : IPA-8734 IPA-8734 IPA-8734 IPA-8734 IPA-8734 Frequency / Down-Link ( MHz. ) : 728 - 746 746 - 757 869 - 894 1930 - 1990 2110 - 2155 Maximum Conducted RF Output Power (dBm.): 14.90 15.24 15.44 16.01 11.65 Maximum Conducted RF Output Power (mW.) : 30.903 33.420 34.995 39.902 14.622 Maximum Antenna Gain (dBi.) : 3.28 4.71 5.58 5.76 6.89 Coax Cable Loss (dB.) : 6.41 6.81 7.77 7.91 8.18 Net Antenna Gain ( Antenna Gain - Coax Cable Loss (dBi) : -3.13 -2.10 -2.19 -2.15 -1.29 Distance from Antenna ( cm.) : 20 20 20 20 20 Effects of Ground Reflections Used: No No No No No Results of Calculations: Maximum Conducted RF Output Power (mW.) : 30.903 33.420 34.995 39.902 14.622 Net Antenna Gain ( Antenna Gain - Coax Cable Loss (dBi) : -3.13 -2.10 -2.19 -2.15 -1.29 Distance from Antenna ( cm. to ft.) : 0.656168 0.656168 0.656168 0.656168 0.656168 FCC Maximum RF Power Density ( mW / cm² ) : 0.4963 0.5063 0.5923 1.0000 1.0000 Calculated RF Power Density ( mW / cm² ) : 0.0030 0.0041 0.0042 0.0048 0.0022

p1520007_FCC_Part 20_Rev 3.0 Page 1 of 141 Test Report Prepared for: Sugarland Holdings Group, LLC Model: CMB-5B215 Description: Consumer Mobile 50db Booster FCC ID: 2ADWV-CMB-5B215 To FCC Part 20 Date of Issue: May 6, 2015 On the behalf of the applicant: Sugarland Holdings Group, LLC 8275 S. Eastern Avenue Suite 563 Las Vegas, NV 89123 Attention of: Robert Skilton, Compliance Coordinator Ph: (775) 299-3305 E-Mail: [email protected] Prepared By Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p1520007 Mike Graffeo Project Test Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing. All results contained herein relate only to the sample tested. p1520007_FCC_Part 20_Rev 3.0 Page 2 of 141 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 February 20, 2015 Mike Graffeo Original Document 2.0 April 27, 2015 Greg Corbin Updated plots on pages 26, 42, updated tables on pages 55, 85, 86. 3.0 May 6, 2015 Amanda Reed Updated FCC ID p1520007_FCC_Part 20_Rev 3.0 Page 3 of 141 Table of Contents Description Page Standard Test Conditions and Engineering Practices 5 Test Result Summary 6 Authorized Frequency Band 7 Maximum Power and Gain 13 Intermodulation 16 Out-of-Band Emissions 22 Conducted Spurious Emissions 53 Noise Limits 76 Uplink Inactivity 83 Variable Gain 84 Occupied Bandwidth 90 Oscillation Detection 121 Radiated Spurious 138 Test Equipment Utilized 141 p1520007_FCC_Part 20_Rev 3.0 Page 4 of 141 ILAC / A2LA Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to the joint ISO-ILAC-IAF Communiqué dated January 2009). The tests results contained within this test report all fall within our scope of accreditation, unless noted below. Please refer to http://www.compliancetesting.com/labscope.html for current scope of accreditation. Testing Certificate Number: 2152.01 FCC Site Reg. #349717 IC Site Reg. #2044A-2 Non-accredited tests contained in this report: N/A p1520007_FCC_Part 20_Rev 3.0 Page 5 of 141 Test and Measurement Data Sub-part 2.1033(c)(14): All tests and measurement data shown were performed in accordance with FCC Rules and Regulations, Part 2, Subpart J and the following individual Parts: 20.21 in conjunction with latest version of KDB 935210. Standard Test Conditions and Engineering Practices Except as noted herein, the following conditions and procedures were observed during the testing: In accordance with ANSI/C63.4-2009, and unless otherwise indicated in the specific measurement results, the ambient temperature of the actual EUT was maintained within the range of 10° to 40°C (50° to 104°F), unless the particular equipment requirements specified testing over a different temperatur…

Text truncated - open the document above for the full version.