2ADXG-PSB15Powerslayer Blu, Bluetooth enabled charger

LED Indicator Green: Charging Complete Orange: Charging Off: Standby Mode Blinking Orange: Indeterminate Battery Status, Still Charging Welcome Specifications Use & LED Indicator Just plug in and charge, that’s it. Green = Charging Complete Orange = Charging Off (no light) = Standby Mode* Blinking Orange = Indeterminate Battery Status, Still Charging *Our Softcharge® technology eliminates standby energy waste, automatically. If your device is plugged in, Powerslayer wakes up periodically to check its battery level and will keep it fully charged. Congratulations on your Powerslayer Blu purchase. You are now part of a revolution in smart charging. Powerslayer prevents overcharging, promotes long-term battery performance, and eliminates needless standby power waste. Leave your device plugged in all day or night, with a clear conscience. Read all instructions and warnings prior to using this product. Improper use of this product may result in damage that you (“Purchaser”), and not Velvetwire (“Manufacturer”), are responsible for. Dimensions: 3 in x 2 in x 1 in Input: AC 100-240 volts (V), 50/60 hertz (Hz) Output: DC 5.1V, 2.0A (10W) Universal USB 2.0 port Warning • Use indoors in a dry location. • Do not connect or disconnect Powerslayer with wet hands. • Do not store Powerslayer near intense sunlight, heat or fire. • If Powerslayer is ever damaged, including dents, punctures, or deformities, discontinue use and dispose of it according to your local recycling guidelines. • If this device is intended by Purchaser to be used by a minor, purchasing adult agrees to provide detailed instructions and warnings to any minor prior to use. Failure to do so is the sole responsibility of Purchaser, who agrees to indemnify Manufacturer for any unintended use or misuse by a minor. • The socket-outlet shall be installed near equipment and shall be easily accessible. Warranty Modification Limited One (1) Year Warranty from the original date of purchase. Any change or modification to this device voids warranty. Flip down plug Plug into outlet Plug in cable FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an experienced radio/TV technician for help. Velvetwire LLC is not responsible for any interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Customer Service If you have any questions or concerns, please contact Velvetwire customer service via email at : [email protected] Powerslayer Blu Smart USB Charger velvetwire.com Legal ® ® Powerslayer Blu is meant for use only in conjunction with appropriate mobile devices. Please consult your device owner’s manual to determine whether this charger is compatible with your particular mobile device. Manufacturer is not responsible for any damages to any mobile device incurred through the use of this product. Manufacturer shall not in any way be liable to you or a third party for any damages suffered by you or a third party as a result of intended or unintended use or misuse of this charger in conjunction with a mobile device or an accessory other than those for which it was designed. If damages result from charger use with an unintended device and you are responsible for that use, you agree to indemnify Manufacturer for any resulting damages and injuries to yourself or a third party. Powerslayer Blu is protected by pending and granted patents. See www.velvetwire.com/patents for a list of all applicable patents. © 2014 Velvetwire LLC. All rights reserved. Velvetwire®, the Velvetwire logo, Softcharge, and Powerslayer® are registered trademarks of Velvetwire LLC, registered in the U.S. and other countries. Printed in USA

This report contains a total of 66 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc. Velvetwire LLC TEST REPORT FOR Powerslayer Model: 100101 Tested To The Following Standards: FCC Part 15 Subpart C Section(s) 15.207 & 15.249 Report No.: 96014-7 Date of issue: September 12, 2014 This test report bears the accreditation symbol indicating that the testing performed herein meets the test and reporting requirements of ISO/IEC 17025 under the applicable scope of EMC testing for CKC Laboratories, Inc. We strive to create long-term, trust based relationships by providing sound, adaptive, customer first testing services. We embrace each of our customers’ unique EMC challenges, not as an interruption to set processes, but rather as the reason we are in business. Page 2 of 66 Report No.: 96014-7 TABLE OF CONTENTS Administrative Information ........................................................................................................................................... 3 Test Report Information ............................................................................................................................................ 3 Report Authorization ................................................................................................................................................. 3 Test Facility Information ............................................................................................................................................ 4 Software Versions ...................................................................................................................................................... 4 Site Registration & Accreditation Information .......................................................................................................... 4 Summary of Results ................................................................................................................................................... 5 Modifications/Conditions During Testing .................................................................................................................. 5 Equipment Under Test ............................................................................................................................................... 6 Peripheral Devices ..................................................................................................................................................... 6 FCC Part 15 Subpart C .................................................................................................................................................... 7 15.207 AC Conducted Emissions ................................................................................................................................ 7 15.249(a)(b) RF Power Output ................................................................................................................................. 16 15.31(e) Voltage Variations ..................................................................................................................................... 22 15.215(c) Occupied Bandwidth ............................................................................................................................... 24 15.249(a)(d) Radiated Spurious Emissions and Band Edge ..................................................................................... 28 Supplemental Information .......................................................................................................................................... 65 Measurement Uncertainty ...................................................................................................................................... 65 Emissions Test Details .............................................................................................................................................. 65 Page 3 of 66 Report No.: 96014-7 ADMINISTRATIVE INFORMATION Test Report Information REPORT PREPARED FOR: REPORT PREPARED BY: Velvetwire LLC 1200 Pacific Ave. Suite 350 Santa Cruz, CA 95018 Morgan Tramontin CKC Laboratories, Inc. 5046 Sierra Pines Drive Mariposa, CA 95338 Representative: Chris Kilgus Project Number: 96014 DATE OF EQUIPMENT RECEIPT: August 28, 2014 DATE(S) OF TESTING: August 28 – September 2, 2014 Report Authorization The test data contained in this report documents the observed testing parameters pertaining to and are relevant for only the sample equipment tested in the agreed upon operational mode(s) and configuration(s) as identified herein. Compliance assessment remains the client’s responsibility. This report may not be used to claim product endorsement by A2LA or any government agencies. This test report has been authorized for release under quality control from CKC Laboratories, Inc. Steve Behm Director of Quality Assurance & Engineering Services CKC Laboratories, Inc. Page 4 of 66 Report No.: 96014-7 Test Facility Information Our laboratories are configured to effectively test a wide variety of product types. CKC utilizes first class test equipment, anechoic chambers, data acquisition and information services to create accurate, repeatable and affordable test results. TEST LOCATION(S): CKC Laboratories, Inc. 1120 Fulton Place Fremont, CA 94539 Software Versions CKC Laboratories Proprietary Software Version EMITest Emissions 5.00.14 Immunity 5.00.07 Site Registration & Accreditation Information Location CB # TAIWAN CANADA FCC JAPAN Fremont US0082 SL2-IN-E-1148R 3082B-1 958979 A-0149 Page 5 of 66 Report No.: 96014-7 SUMMARY OF RESULTS Standard / Specification: FCC Part 15 Subpart C Test Procedure/Method Description Modifications* Results 15.207 / ANSI C63.4 Conducted Emissions NA Pass 15.249 (a)(b) / ANSI C63.4 RF Power Output NA Pass 15.31(e) / ANSI C63.4 Voltage Variation NA Pass 15.215(c) / ANSI C63.4 Occupied Bandwidth…

Text truncated - open the document above for the full version.