2ADXQMTGACSMATIGARD SMART ALARM SYSTEM

Welcome to MatiGard™Air Quick Guide Designed for home and business security. Easy to setup and use with Magictrl™. Dinsafe™ Inc. , 2014 Getting Started Power ON Flip the switch on the back of the panel to the ON position. Replace the battery cover. Wait 20 seconds as the system runs a start-up diagnostic. You will hear a confirmation when the test is complete. When you see the screen above the system is ready. Start Using the Mobile Client, Magictrl™ Download & Setup 1. Visit www.fortresssecuritystore.com/app or scan the QR-Code to the left. 2. Run the App and follow the on-screen instructions. Pairing CONTACT SENSOR MatiGard™ uses a new pairing technology called non-trigger. 1. Press + button to scan the QR-Code/barcode on the CONTACT SENSOR to pair the CONTACT SENSOR with the panel. 2. Name the CONTACT SENSOR and save the setting to complete pairing. 3. The system will send out a pairing request and you will receive a confirmed text. 4. If needed, you can always modify or delete CONTACT SENSOR here. MatiGard™ only supports the Dinsafe™ CONTACT SENSOR. Daily Operations • Main Panel Daily Operations · Magictrl™ & Remote Controller FAQ 1. Can I use non-Dinsafe™ branded CONTACT SENSOR with the MatiGard™? Sorry, MatiGard™ only supports the Dinsafe™ CONTACT SENSOR. 1. The Dinsafe™ CONTACT SENSOR use encrypted communication protocols with patented technology. This makes them safer and more stable. 2. The Dinsafe™ CONTACT SENSOR are easily paired with the system just by scanning QR codes or Bar codes. All of our CONTACT SENSOR support low-battery warning. Non-Dinsafe™ branded CONTACT SENSOR might in some cases be able to pair with the MatiGard™ , but stability cannot be guaranteed. We highly advise against using non-Dinsafe™ branded CONTACT SENSOR. 2. How can I get help with my MatiGard™ system. 1. Contact the local agency first to get the fastest support service. 2. Visit www.dinsafe.com and summit your question, or send us an email to 3. How can I reset my MatiGard™ system? ( If you lose your phone or get a new telephone number ) 1. Power up your MatiGard™ panel. 2. Hold down the Reset button on the back of the panel until you hear 1 beep. 3. Continue holding the button for 6 seconds and you will hear 2 beeps. 4. The system is now Reset. FCC Warning Statements: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected ‐‐ Consult the dealer or an experienced radio/TV technician for help.

Shenzhen Dinsafe Intelligence Technology Co., Ltd Room 721, Zone A Of Hua Mei Ju, Xin Hu Rd, Baoan Dist, Shenzhen , China DATE: 2015-01-23 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 TX: FCC ID: __ 2ADXQMTGACS ____ RX: FCC ID:__ 2ADXQMTGAIR ___ TX: Product Name:__ MatiGard Smart Alarm System _ RX: Product Name:__ MatiGard Smart Alarm System _ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description  Parts Lists These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this / Day of 1/23/2015/ By:Gensheng SignaturePrinted Title:Business Director On behalf of : Shenzhen Dinsafe Intelligence Technology Co., Ltd Telephone:0755-23018188

Shenzhen Dinsafe Intelligence Technology Co., Ltd Room 721, Zone A Of Hua Mei Ju, Xin Hu Rd, Baoan Dist, Shenzhen , China DATE : 2015-03-18 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 TX: FCC ID: __ 2ADXQMTGACS ____ RX: FCC ID:__ 2ADXQMTGAIR ___ TX: Product Name:__ MatiGard Smart Alarm System _ RX: Product Name:__ MatiGard Smart Alarm System _ Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device ЬTest Setup Photos ЬExternal Photos ЬInternal Photos ЬUser Manual These documents contain detailed system and equipment description and related information about the product which Shenzhen Dinsafe Intelligence Technology Co., Ltd considers to be proprietary, confidential, and a custom design and, otherwise would not release to the general public. Since this design is a basis from which future technological products will evolve, Shenzhen Dinsafe Intelligence Technology Co., Ltd considers this information to be of benefit to its competitors, and that the disclosure of information in these documents would give competitors an unfair advantage in the market This request is being made retroactively due to an over site on our part. We understand that the information has been publicly available since the date of grant. Dated this / Day of 1/23/2015/ By: Gensheng SignaturePrinted Title:Business Director On behalf of : Shenzhen Dinsafe Intelligence Technology Co., Ltd Telephone:0755-23018188 that the information has been publicly available 180days later since the date of grant.

Differences Declaration To whom concern, We, Shenzhen Dinsafe Intelligence Technology Co., Ltd declares: The product model(s) G-1-ACC、G2-1-ACC、G3-1-ACC、 Gfence-ACC、Mini-1-ACC、AirX-ACC、I-ACC、X-1-ACC、 X2-1-ACC are identical in the PCB layout, interior structure and electrical circuits with the product model AirX-ACC, the only differences are the model name for commercial purpose. Authorized signature: Position: Management Date: 2015/3/18

External Photos of EUT Sample TX TX RX

TX: FCC ID: 2ADXQMTGACS TX Label Location FCC ID: 2ADXQMTGACS

Internal Photos of EUT Sample TX TX

Shenzhen EBO Technology Co., Ltd . 1-4F, Huafeng Science Park, Xin’an Sixth Road, 82 th District, Bao’an, Shenzhen, China. Telephone: +86-755-29451282, Fax: +86-755-22639141 Report No.: EBO1412093-E412 Page 1 of 17 Authorized Signature: Kevin Yu Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the EBO product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of EBO International Electrical Approvals or testing done by EBO International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by EBO International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC REPORT Applicant: SHENZHEN DINSAFE INTELLIGENCE TECHNOLOGY CO., LTD Address of Applicant: Room 721, Zone A Of Hua Mei Ju, Xin Hu Rd., Baoan Dist., Shenzhen, China Equipment Under Test (EUT) Product Name: MATIGARD SMART ALARM SYSTEM Brand Name: MatiGard Model No.: G-1-ACC,G2-1-ACC, G3-1-ACC, Gfence-ACC, Mini-1-ACC, AirX-ACC, I-ACC, X-1-ACC, X2-1-ACC FCC ID: 2ADXQMTGACS Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.231:2013 Date of sample receipt: February 27, 2015 Date of Test: February 27, 2015 To March 05, 2015 Date of report issue: March 05, 2015 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Shenzhen EBO Technology Co., Ltd . Report No.: EBO1412093-E412 Page 2 of 17 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.ebotek.cn 1 Version Version No. Date Description 00 March 05, 2015 Original Prepared by: Date: March 05, 2015 Project Engineer Reviewed by: Date: March 05, 2015 Reviewer and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.ebotek.cn. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” Shenzhen EBO Technology Co., Ltd . Report No.: EBO1412093-E412 Page 3 of 17 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.ebotek.cn and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.ebotek.cn. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Contents Page 1 VERSION .................................................................................................................................................. 2 2 CONTENTS .............................................................................................................................................. 3 3 TEST SUMMARY ..................................................................................................................................... 4 4 GENERAL INFORMATION ...................................................................................................................... 5 4.1 CLIENT INFORMATION.......................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 4.3 TEST MODE......................................................................................................…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS