
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
MobiRoam SmartBox USER MANUAL Ver 1.0 www.mobiroam.com 2 Package contains: 1. MobiRoam SmartBox 2. Power Supply (with interchangeable plugs) 3. LAN Cable 4. SIM Adaptor set Package Contents (WARNING: Do not place unloaded SIM adaptor into the SmartBox as it may cause permanent damage to the SmartBox) 3 SMARTBOX 1. Status LED 2. SIM Card Slot 3. LAN Port 4. Reset 5. Power Port 6. Power On indicator 2 3 1 654 4 Connecting The Unit SIM & SIM adapter Power Home internet 5 Install Sim Card For Micro & Nano SIMS: USE SIM ADAPTOR. Place SIM into SIM card slot. WARNING: Do not place unloaded SIM adaptor into the SmartBox as it may cause permanent damage to the SmartBox) 6 1. Connect SmartBox to Home Router using LAN Cable (see page 7) 2. Connect power supply 3. GoTo: www.mobiroam.com/setup Setup Instructions 7 MobiRoam SmartBoxInternet Port LAN cable LAN port LAN port Troubleshooting www.mobiroam.com/setup 8 Model: SmartBox_PMG_005 Frequency: 2100/1900/850 Mhz Power Supply: 240/110VAC. FCC ID :2ADXTPMG-005 FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Specifications NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Made in China 9 This section contains regulatory information for your device. RF Exposure - This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” Regulatory Notices 10 WARNING (EMI) - United States FCC Information -: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 11 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by MobiRoam could void the user's authority to operate the equipment. 12 www.mobiroam.com
5. Tune up Procedure
A Test Lab Techno Corp. External Photos A Test Lab Techno Corp. A Test Lab Techno Corp. A Test Lab Techno Corp.
A Test Lab Techno Corp. Internal Photos WIFI Antenna GSM,WCDMA Antenna A Test Lab Techno Corp. A Test Lab Techno Corp. A Test Lab Techno Corp. A Test Lab Techno Corp. A Test Lab Techno Corp.
A Test Lab Techno Corp. Changan Lab:No. 140 -1, Changan Street, Bade City, Taoyuan County, Taiwan R.O.C. Te l:886-3-271-0188 / Fax:886-3-271-0190 MPE Report Test Report No. : 1501FS12-01 Applicant : MobiRoam Pty Ltd Manufacturer : Dongguan Branch of Shenzhen StrongRising Electronics Co.,Ltd Product Type : Media Gateway Trade Name : SmartBox Model Number : PMG-005 Date of Received : Dec. 24, 2014 Test Period : Dec. 31, 2014 ~ Jan. 13, 2015 Date of Issued : Feb. 10, 2015 Test Specification : 47 CFR § 2.1091 47 CFR §1.1310 ANSI / IEEE Std.C95.1-1992 Location of Test Lab. : Chang-an Lab. 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. 4. This document may be altered or revised by A Test Lab Techno. Corp. personnel only, and shall be noted in the revision section of the document. Approved By : Tested By : (Bill Hu) (Sky Chou) ©2015 A Test Lab Techno Corp. Report Number: 1501FS12-01Page 1 of 14 Contents 1. Description of Equipment under Test (EUT).................................................................... 3 2. Human Exposure Assessment ........................................................................................ 4 3. RF Output Power ............................................................................................................ 5 4. Test Result ....................................................................................................................12 ©2015 A Test Lab Techno Corp. Report Number: 1501FS12-01Page 2 of 14 1. Description of Equipment under Test (EUT) Applicant MobiRoam Pty Ltd Applicant Address 5 Learoyd Street, Mt Lawley, Perth, Australia Manufacturer Dongguan Branch of Shenzhen StrongRising Electronics Co.,Ltd Manufacturer Address Qingping Road No.2 Qinghutou Village Tangxia Town,Dongguan city,Guangdong Province,China Product Type Media Gateway Trade Name SmartBox Model Number PMG-005 FCC ID 2ADXTPMG-005 Frequency Range 824.2 - 848.8 MHz GPRS/EGPRS 850 1850.2 - 1909.8 MHz GPRS/EGPRS 1900 1852.4 - 1907.6 MHz WCDMA(RMC 12.2K)/HSDPA/HSUPA Band II 826.4 - 846.6 MHz WCDMA(RMC 12.2K)/HSDPA/HSUPA Band V 2412 - 2462 MHz IEEE 802.11b / 802.11g 2412 - 2462 MHz IEEE 802.11n 2.4GHz Standard-20MHz 2422 - 2452 MHz IEEE 802.11n 2.4GHz Wide-40MHz *GPRS/EGPRS Multi Class :12 Transmit Power GPRS/EGPRS 850: 1.879 W / 32.74 dBm (conducted power) GPRS/EGPRS 1900: 0.853 W / 29.31 dBm WCDMA(RMC 12.2K)/HSDPA/HSUPA Band II: 0.213 W / 23.29 dBm WCDMA(RMC 12.2K)/HSDPA/HSUPA Band V: 0.226 W / 23.54 dBm IEEE 802.11b: 0.067 W / 18.24 dBm IEEE 802.11g: 0.028 W / 14.45 dBm IEEE 802.11n 2.4GHz Standard-20MHz: 0.028 W / 14.41 dBm IEEE 802.11n 2.4GHz Standard-40MHz: 0.022 W / 13.40 dBm Antenna Specification GSM 850: 1 dBi PCS 1900: 1 dBi WCDMA Band II: 1 dBi WCDMA Band V: 1 dBi IEEE 802.11b, IEEE 802.11g: 0 dBi IEEE 802.11n 2.4GHz Standard-20MHz / Wide-40MHz: 0 dBi Antenna Designation Internal Antenna RF Evaluation 1.00 W/m 2 The above equipment was tested by A Test Lab Techno Corp. For compliance with the requirements set forth in 47 CFR § 2.1091 & 47 CFR § 1.1310. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties ©2015 A Test Lab Techno Corp. Report Number: 1501FS12-01Page 3 of 14 2. Human Exposure Assessment Due to the design and installation of this product, it is not possible to conduct SAR evaluation. This is because client either manufactures or supplies the antenna(s) that will be used in the installation of this product. Therefore, this product will be evaluated as a mobile device per 47 CFR §1.1310 titled “Radiofrequency radiation exposure limits”, generally referred to as MPE limits. In 47 CFR § 2.1091, paragraph (b) defines a mobile device as “a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. ” This product is intended to be installed into a vehicle such that the unit is physically secured at one location. In the installation guide supplied with the product, Client has made the following statement: “IMPORTANT: To meet the FCC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user and nearby persons and the antenna”. Based on the installation of the transceiver and the antenna, the transmitters radiating structure is more than 20 cm from the user. Thus, this product is a “mobile device” as defined in section § 2.1091 paragraph (b). Exposure evaluation 2 4R PG S π = Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna. ©2015 A Test Lab Techno Corp. Report Number: 1501FS12-01Page 4 of 14 3. RF Output Power Band Date Rate CH Frequency (MHz) Average Conducted power (dBm) 128 824.2 32.53 190 836.6 32.74 4Down1Up 251 848.8 32.61 128 824.2 31.01 190 836.6 31.22 3Down2Up 251 848.8 31.09 128 824.2 29.53 190 836.6 29.74 2Down3Up 251 848.8 29.61 128 824.2 27.94 190 836.6 28.15 GPRS850 1Down4Up 251 848.8 28.02 128 824.2 26.68 190 836.6 26.73 4Down1Up 251 848.8 26.58 128 824.2 24.65 190 836.6 24.70 3Down2Up 251 848.8 24.55 128 824.2 22.99 190 836.6 23.0…
Text truncated - open the document above for the full version.
A Test Lab Techno Corp. Report Number:1411FR17 Page 1 of 52 FCC 47 CFR PART 22H and 24E Test Report Product Type : Media Gateway Applicant : MobiRoam Pty Ltd Address : 5 Learoyd Street, Mt Lawley, Perth, Australia Trade Name : SmartBox Model Number : PMG-005 Test Specification : FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 ANSI/TIA-603-C-2004 Application Purpose : Original Receive Date : December 09, 2014 Test Period : December 15,2014 to January 19, 2015 Issue Date : January 27, 2015 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Tel:+886-3-2710188 / Fax:+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number:1411FR17 Page 2 of 52 Revision History Rev. Issue Date Revisions Revised By 00 January 27, 2015 Initial Issue A Test Lab Techno Corp. Report Number:1411FR17 Page 3 of 52 Veri f i c a t i o n o f C o m p l i a n c e Issued Date: 01/27/2015 Product Type : Media Gateway Applicant : MobiRoam Pty Ltd Address : 5 Learoyd Street, Mt Lawley, Perth, Australia Trade Name : SmartBox Model Number : PMG-005 FCC ID : 2ADXTPMG-005 EUT Rated Voltage : DC 5.0V, 2.0A Test Voltage : 120 Vac / 60 Hz Applicable Standard : FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 ANSI/TIA-603-C-2004 Application Purpose : Original Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Tel:+886-3-2710188 / Fax:+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 22H, Part 24E. The test results of this report relate only to the tested sample identified in this report. Approved By : Reviewed By : (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) A Test Lab Techno Corp. Report Number:1411FR17 Page 4 of 52 TABLE OF CONTENTS 1 General Information ......................................................................................................... 6 1.1. EUT Description ....................................................................................................................... 6 1.2. Mode of Operation .................................................................................................................... 7 1.3. EUT Exercise Software ............................................................................................................. 7 1.4. Configuration of Test System Details ....................................................................................... 8 1.5. Test Site Environment ............................................................................................................... 8 1.6. Summary of Test Result ............................................................................................................ 9 2 RF Output Power Test .................................................................................................... 10 2.1. Limit ........................................................................................................................................ 10 2.2. Test Instruments ...................................................................................................................... 10 2.3. Test Setup ................................................................................................................................ 10 2.4. Test Procedure ......................................................................................................................... 10 2.5. Uncertainty ............................................................................................................................... 11 2.6. Test Result ................................................................................................................................ 11 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test ..................... 13 3.1. Limit ........................................................................................................................................ 13 3.2. Test Instruments ...................................................................................................................... 13 3.3. Setup........................................................................................................................................ 14 3.4. Test Procedure ......................................................................................................................... 15 3.5. Uncertainty .............................................................................................................................. 15 3.6. Test Result ............................................................................................................................... 16 4 Emission Bandwidth & Occupied Bandwidth Test ...................................................... 17 4.1. Limit ........................................................................................................................................ 17 4.2. Test Instruments .....................................................................................…
Text truncated - open the document above for the full version.
A Test Lab Techno Corp. Report Number:1411FR18 Page 1 of 55 FCC 47 CFR PART 22H and 24E Test Report Product Type : Media Gateway Applicant : MobiRoam Pty Ltd Address : 5 Learoyd Street, Mt Lawley, Perth, Australia Trade Name : SmartBox Model Number : PMG-005 Test Specification : FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 ANSI/TIA-603-C-2004 Application Purpose : Original Receive Date : December 09, 2014 Test Period : December 15,2014 to January 19, 2015 Issue Date : January 27, 2015 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Tel:+886-3-2710188 / Fax:+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number:1411FR18 Page 2 of 55 Revision History Rev. Issue Date Revisions Revised By 00 January 27, 2015 Initial Issue A Test Lab Techno Corp. Report Number:1411FR18 Page 3 of 55 Veri f i c a t i o n o f C o m p l i a n c e Issued Date: 01/27/2015 Product Type : Media Gateway Applicant : MobiRoam Pty Ltd Address : 5 Learoyd Street, Mt Lawley, Perth, Australia Trade Name : SmartBox Model Number : PMG-005 FCC ID : 2ADXTPMG-005 EUT Rated Voltage : DC 5.0V, 2.0A Test Voltage : 120 Vac / 60 Hz Applicable Standard : FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 ANSI/TIA-603-C-2004 Application Purpose : Original Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Tel:+886-3-2710188 / Fax:+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 22H, Part 24E. The test results of this report relate only to the tested sample identified in this report. Approved By : Reviewed By : (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) A Test Lab Techno Corp. Report Number:1411FR18 Page 4 of 55 TABLE OF CONTENTS 1 General Information ......................................................................................................... 6 1.1. EUT Description ....................................................................................................................... 6 1.2. Mode of Operation .................................................................................................................... 7 1.3. EUT Exercise Software ............................................................................................................. 7 1.4. Configuration of Test System Details ....................................................................................... 8 1.5. Test Site Environment ............................................................................................................... 8 1.6. Summary of Test Result ............................................................................................................ 9 2 RF Output Power Test .................................................................................................... 10 2.1. Limit ........................................................................................................................................ 10 2.2. Test Instruments ...................................................................................................................... 10 2.3. Test Setup ................................................................................................................................ 10 2.4. Test Procedure ......................................................................................................................... 10 2.5. Uncertainty ............................................................................................................................... 11 2.6. Test Result ............................................................................................................................... 12 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test ..................... 14 3.1. Limit ........................................................................................................................................ 14 3.2. Test Instruments ...................................................................................................................... 14 3.3. Setup........................................................................................................................................ 15 3.4. Test Procedure ......................................................................................................................... 17 3.5. Uncertainty .............................................................................................................................. 17 3.6. Test Result ............................................................................................................................... 18 4 Peak to Average Ratio Test ........................................................................................... 19 4.1. Limit ........................................................................................................................................ 19 4.2. Test Instruments ...................................................................…
Text truncated - open the document above for the full version.
A Test Lab Techno Corp. Setup Photograph Radiated Emissions Below 1 GHz A Test Lab Techno Corp. Setup Photograph Radiated Emissions Above 1 GHz
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 6 | 24E | 1.85 GHz - 1.91 GHz | 281.00 mW | 4M21F9W | 0.01 ppm |