2ADZC-5601RAFull-Duplex Wireless Intercom System

Solidcom SE Quick Guide V1.0 技术要求： * 材质：100g白牛皮 * 成型尺寸：100*142mm * 工艺：骑马钉 12P * 印刷颜色：彩色印刷 * 公差： ±1mm 100g白牛皮 苏列攀 初版发行V0.1 袁旻婧 V2.0 20240802 受控发行V1.0袁旻婧202408002 更新参数表V2.0袁旻婧202408002 袁旻婧 龙小琴 20240802 20240802 20240802 i5601-2.4G 英文快速操作指南 * 所有材料及相关加工工艺需符合RoHS及TSCA指令标准，所有材料及其原料必须和上述规格型号一致， 且未经许可不得擅自更改； * 来货外包装必须符合环保要求，并打上“RoHS”和“TSCA”标记 * 表面洁净，无脏污，无撕裂，无破损，表面无明显压痕、折痕 3003080632 HY-PRT_PG_08_356 100mm 142mm 深圳市昊一源科技有限公司 Compliance Information EU Regulatory Information Hereby,Shenzhen Hollyland Technology Co.,Ltd declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at www.hollyland.com. RF Exposure Information This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 2.0 W/ kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 5 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided. CAUTION：RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Rechtliche EU-Hinweise Hollyland erklärt hiermit, dass das Gerät mit den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinien 2014/53/ EU, 2011/65/EU und (EU)2015/863 konform ist. Die originale Fassung der EU-Konformitätserklärung finden Sie unter www.hollyland.com. Informationen zur HF-Exposition Dieses Gerät wurde getestet und erfüllt die geltenden Grenzwerte für die Belastung durch Funkfrequenzen (RF). Die spezifische Absorptionsrate (SAR) bezieht sich auf die Geschwindigkeit, mit der der Körper HF-Energie absorbiert. Die SAR-Grenzwerte liegen bei 2,0 W/kg (gemittelt über 10 Gramm Gewebe) in Ländern, die sich an den Grenzwert des Rates der Europäischen Union halten. Die SAR-Tests werden mithilfe von Standardbetriebspositionen durchgeführt, wobei das Gerät in allen getesteten Frequenzbändern mit seiner höchsten zertifizierten Leistung sendet. Um die Exposition gegenüber HF-Energie zu reduzieren, verwenden Sie eine Freisprecheinrichtung oder halten Sie dieses Gerät auf eine andere Weise im Abstand von Ihrem Kopf und Körper. Tragen Sie dieses Gerät mindestens 5 mm von Ihrem Körper entfernt, um sicherzustellen, dass die Expositionswerte gleich oder unter den getesteten Werten bleiben. Verwenden Sie dazu Gürtelclips, Holster oder ähnliches am Körper getragenes Zubehör, das keine Metallteile enthält. Gehäuse, die Metallteile enthalten, können die HF- Leistung des Geräts, einschließlich der Einhaltung der HF-Expositionsrichtlinien, in einer Weise verändern, die nicht getestet oder zertifiziert wurde. Die Verwendung solchen Zubehörs sollte vermieden werden. VORSICHT: EXPLOSIONSGEFAHR BEIM AUSTAUSCH DES AKKUS DURCH EINEN FALSCHEN BATTERIETYP. Wird eine Batterie ins Feuer oder in einen heißen Ofen geworfen, mechanisch zerquetscht oder zerschnitten, kann dies zu einer Explosion führen. Beim Belassen einer Batterie in einer extrem heißen Umgebung kann es zu einer Explosion oder zum Austreten von brennbarer Flüssigkeit bzw. Gas kommen. Bei einem extrem niedrigen Luftdruck kann es zu einer Explosion der Batterie oder zum Austreten von brennbarer Flüssigkeit bzw. Gas kommen. Hören Sie nicht über einen längeren Zeitraum mit hoher Lautstärke, um mögliche Gehörschäden zu vermeiden Información reglamentaria de la UE Shenzhen Hollyland Technology Co.,Ltd declara por la presente que el dispositivo cumple los requisitos esenciales y otras disposiciones pertinentes de las directivas 2014/53/UE, 2011/65/UE y (UE)2015/863. Puede encontrar la declaración EU de conformidad original en www.hollyland.com. Información sobre la exposición a RF Este dispositivo ha sido probado y cumple los límites aplicables de exposición a radiofrecuencia (RF). La tasa de absorción específica (SAR) se refiere a la velocidad a la que el cuerpo absorbe la energía de RF. Los límites de SAR son de 2,0 W/kg (promedio sobre 10 gramos de tejido) en los países que siguen 1 el límite del Consejo de la Unión Europea. Las pruebas de SAR se realizan utilizando posiciones de funcionamiento estándar con el dispositivo transmitiendo a su nivel de potencia certificado más alto en todas las bandas de frecuencia probadas. Para reducir la exposición a la energía de RF, utilice un accesorio de manos libres u otra opción similar para mantener este dispositivo alejado de la cabeza y el cuerpo. Lleve este dispositivo a una distancia mínima de 5 mm de su cuerpo para garantizar que los niveles de exposición permanezcan iguales o inferiores a los niveles probados. Elija los clips para cinturón, fundas u otros accesorios corporales similares que no contengan componentes metálicos para soportar el funcionamiento de esta manera. Las carcasas con…

Text truncated - open the document above for the full version.

ShenzhenHollylandTechnologyCo.,Ltd Date: August 13, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2ADZC-5601RA Shenzhen Hollyland Technology Co.,Ltd certifies that the equipment for which authorization is soughtis not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant signature: Applicant printed name:Vincent Ma Shenzhen Hollyland Technology Co.,Ltd Date: August 13, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID:2ADZC-5601RA Shenzhen Hollyland Technology Co.,Ltd certifies that, as of the date of the filing of the application, the applicantis notidentified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name)Vincent Ma

ShenzhenHollylandTechnologyCo.,Ltd. Address：8F,Building5D,SkyworthInnovationValley,TangtouRoad,ShiyanStreet, BaoanDistrict,Shenzhen,518055China GranteeCode:2ADZC FRN:0024211138 Date:2024-08-14 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2ADZC-5601RA ShenzhenHollylandTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,HevotechnologyCo.,LtdisourdesignatedU.S.agentforserviceofprocessfor theabovereferencedFCCID.ShenzhenHollylandTechnologyCo.,Ltd.acceptstomaintain anagentfornolessthanoneyearafterthegranteehasterminatedallmarketingand importationortheconclusionofanyCommission-relatedproceedinginvolvingtheequipment. HevotechnologyCo.,Ltdaccepts,asofthedateofthefilingoftheapplication,theobligation ofthedesignatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:HevotechnologyCo.,Ltd Address:I8008SkyParkCirirvine,CA92614 FRN:0033495417 ContactPerson:Vincent.ma Tel.:(949)-932-0648 Email:[email protected] Sincerely, Vincent.ma Salesdirector

ShenzhenHollylandTechnologyCo.,Ltd Signature: Name:VincentMa Title:Sales Directo Date: August 13, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Full-Duplex Wireless Intercom System/Solidcom SE, Solidcom SE-2S, Solidcom SE-4SSolidcom SE-5S FCC ID:2ADZC-5601RA To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Schematic Diagram,Block Diagram,Operational Description) required to be submitted with this application be permanently withheld from public review. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, r

ShenzhenHollylandTechnologyCo.,Ltd Signature: Name:VincentMa Title:Sales Directo Date: August 13, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION FCC ID:2ADZC-5601RA To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, r

ModelConfirmationLetter Theirelectricalcircuitdesign,layout,componentsusedandinternalwiringareidentical, Onlythenumberofheadphonesthatidentifytheshipmentisdifferent We, Shenzhen Hollyland Technology Co.,Ltd. certify the product: Full-Duplex Wireless Intercom System Model No.: Solidcom SE, Solidcom SE-2S, Solidcom SE-4SSolidcom SE-5S . Signature： GranteeContact: VincentMa CompanyName: ShenzhenHollylandTechnologyCo.,Ltd. Date:2024-8-14

Externalphotos

±2° ±1° ±0.5° ±0.5 ±0.2 ±0.15 ±0.3 ±0.15 ±0.1 ±0.1 ±0.05 角度θ L≥30 6<L≤30 0<L≤6 c(粗糙级) m(中等级) f(精密级) 尺寸分段 未标注尺寸公差表 ±0.2 工艺 : 镭雕 颜色：灰色（PANTONE COOL GREY 6C） 214-240401 5.00 居中 产线镭雕 V1.0 i5601-2.4G HL_从耳机认证镭雕 HY-PRT_LC_01_244 5002010444 V0.120240614 袁旻婧 夏德全 苏列攀 20240809 20240809 20240809 初版发行(EVT) 夏德全 V0.120240809受控发行(首批） 袁旻婧 深圳市昊一源科技有限公司 25.76 17.00 PP 2ADZC-5601RA 214-240401 2ADZC-5601RA

Internalphotos ANT1 ANT2

Page1of41 SARTestReport ReportNo.:AGC14075240802FH01 FCCID :2ADZC-5601RA PRODUCTDESIGNATION: Full-DuplexWirelessIntercomSystem BRANDNAME: HOLLYLAND,HOLLYVIEW,HOLLYVOX MODELNAME: SolidcomSE,SolidcomSE-2S,SolidcomSE-4S，SolidcomSE-5S APPLICANT: ShenzhenHollylandTechnologyCo.,Ltd. DATEOFISSUE: Aug.21,2024 STANDARD(S): IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2005 REPORTVERSION: V1.2 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd. ReportNo.:AGC14075240802FH01 Page 2 of 41 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Aug.19,2024InvalidInitialRelease V1.11 st Aug.20,2024Invalid Revisedhardwareversion, softwareversion,battery brand,SampleID. V1.22 nd Aug.21,2024Valid ModifyEUTmodel,battery information,andpeakpower. ReportNo.:AGC14075240802FH01 Page 3 of 41 TestReport ApplicantNameShenzhenHollylandTechnologyCo.,Ltd. ApplicantAddress 8F,Building5D,SkyworthInnovationValley,TangtouRoad,ShiyanStreet, BaoanDistrict,Shenzhen,518055China ManufacturerNameShenzhenHollylandTechnologyCo.,Ltd. ManufacturerAddress 8F,Building5D,SkyworthInnovationValley,TangtouRoad,ShiyanStreet, BaoanDistrict,Shenzhen,518055China FactoryNameShenzhenHollylandTechnologyCo.,Ltd. FactoryAddress 8F,Building5D,SkyworthInnovationValley,TangtouRoad,ShiyanStreet, BaoanDistrict,Shenzhen,518055China ProductDesignationFull-DuplexWirelessIntercomSystem BrandNameHOLLYLAND,HOLLYVIEW,HOLLYVOX ModelNameSolidcomSE SeriesModelsSolidcomSE-2S,SolidcomSE-4S，SolidcomSE-5S DeclarationofDifference It'sjustthatthenumberofheadphonesthatidentifytheshipmentisdifferent,and everythingelseisexactlythesame EUTVoltageDC3.8Vbybattery ApplicableStandard IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2005 Dateofreceiptoftestitem Aug.06,2024 TestDate Aug.14,2024toAug.16,2024 ReportTemplateAGCRT-US-4G/SAR(2021-04-20) Note:Theresultsoftestinginthisreportapplytotheproduct/systemwhichwastestedonly. PreparedBy TheaHuang (ProjectEngineer) Aug.21,2024 ReviewedBy CalvinLiu (Reviewer) Aug.21,2024 ApprovedBy MaxZhang (AuthorizedOfficer) Aug.21,2024 ReportNo.:AGC14075240802FH01 Page 4 of 41 TABLEOFCONTENTS 1.SUMMARYOFMAXIMUMSARVALUE...........................................................................................................5 2.GENERALINFORMATION................................................................................................................................6 2.1.EUTDESCRIPTION..........................................................................................................................................6 3.SARMEASUREMENTSYSTEM.........................................................................................................................7 3.1.THESATIMOSYSTEMUSEDFORPERFORMINGCOMPLIANCETESTSCONSISTSOFFOLLOWINGITEMS..................7 3.2.COMOSARE-FIELDPROBE...........................................................................................................................8 3.3.ROBOT............................................................................................................................................................8 3.4.VIDEOPOSITIONINGSYSTEM...........................................................................................................................9 3.5.DEVICEHOLDER..............................................................................................................................................9 3.6.SAMTWINPHANTOM....................................................................................................................................10 4.SARMEASUREMENTPROCEDURE...............................................................................................................11 4.1.SPECIFICABSORPTIONRATE(SAR)...............................................................................................................11 4.2.SARMEASUREMENTPROCEDURE.................................................................................................................12 4.3.RFEXPOSURECONDITIONS...........................................................................................................................14 5.TISSUESIMULATINGLIQUID..........................................................................................................................15 5.1.THECOMPOSITIONOFTHETISSUESIMULATINGLIQUID.....................................................................................15 5.2.TISSUEDIELECTRICPARAMETERSFORHEADANDBODYPHANTOMS...............................................................16 5.3.TISSUECALIBRATIONRESULT.........................................................................................................................17 6.SARSYSTEMCHECKPROCEDURE.............................................................................................................17 6.1.SARSYSTEMCHECKPROCEDURES..............................................................................................................18 6.2.SARSYSTEMCHECK....................................................................................................................................19 7.EUTTESTPOSITION.......................................................................................................................................21 7.1.TESTPOSITION.............................................................................................................................................21 8.SAREXPOSURELIMITS.................................................................................................................................22 9.TESTFACILITY................................................................................................................................................23 10.TESTEQUIPMENTLIST................................................................................................................................24 11.MEASUREMENTUNCERTAINTY.........................................................................…

Text truncated - open the document above for the full version.

CALIBRATIONDATA PROBECALIBRATIONDATA

深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 1 产品规格书 ProductSpecification 客户名称CustomerName: 客户料号：CustomerP/N Shenzhen Hollyland Technology Co.,Ltd : 项目名称ProjectName：5601-2.4G 规格描述ProductSpec：FPC天线 版本REV：V1.0 日期Date：2024-07-23 制作 drawing 审核 check 批准 approved 温勇鹏王昌荣蒋振华 客户承认CustomerApprove 审核 check 批准 approved 承认 approval E-mail：[email protected] ： //www.zkant.com 地址 : 深圳市龙华区大浪街道同胜社区华容路 355 号 102 电话：0755-2958809618975422013 Room102,No.355,HuarongRoad,TongshengCommunity,DalangStreet,LonghuaDistrict,Shenzhen 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 2 目录 Index 一、封面Cover------------------------------------1 二、目录Index-------------------------------------2 三、项目图ProjectChart-----------------------------------3 四、电性能指标ElectricalPerformanceIndex--------3/6 五、工程图纸ProductDrawing-----------------------7/8 六、测试设备及原理TestingEquipment&Principle------9/10 七、可靠性测试报告Reliadilitytestreport----------11 八、产品包装规范Codeforproductpackaging--------12 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 3 3.项目图ProjectChart 5601-2.4G 4.电性能指标ElectricalPerformanceIndex 电器性能指标ElectricalSpecifications 频率范围2400-2500MHz 电压驻波比≤1.5VSWR≤1.5 增益≤2.5DBIGAIN≤2.5DBI 辐射方式全向RadiationOMNI 极化方式线极化PolarizatinLINEAR 输入阻抗50Ω Input Impedance 50Ω 机械性能指标MechanicalSpecifications 接口形式弹片接触 Input connector Shrapnelcontact 天线材质FPC Antenna materia FPC 工作温度-30°C~+80°C Working Temperature -30°C~+80°C 工作湿度40~85% Working Humidity 40~85% 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 4 L(左）驻波回损 R(右）驻波回损 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 5 Data：L（左） 增益效率 Data：R（右） 效率增益 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 6 3D diagram：L 2400MHZ2450MHZ2500MHZ Z-YX-YZ-X 3D diagram：R 2400MHZ2450MHZ2500MHZ Z-XZ-YX-Y 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 7 5.工程图纸ProductDrawing 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 8 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 9 6.测试设备及原理TestingEquipmentandPrinciple 1.测试设备： 网络分析仪NetworkAnalyzers: Agilent8753D5071B 综合测试仪CommunicationsTestSet: AgilentE5515C 3D暗室测试系统3DChamberTestSystem： 2.测试原理： 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 10 24探头微波暗室测试设备 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 11 7.可靠性测试报告Reliadilitytestreport 测试项目测试方法要求结果 C1V.S.W.R.电性驻 波比 设计网路分析仪参数进行测试符合待测物规范pass M1天线增益设计天线暗室参数进行测试符合待测物规范pass M2Vibration震动GB/T2423.48-2008 Amplitude:0.03inch(1.5mm);Freq:20to 80to20Hz3directions;2hoursforeach direction振幅1.5mm；频率20~80~20Hz；3 个方向各2H 1.NoVisualDamage 2.FrequencyTol.≤5% 无明显外观不良;频率偏移≤5% pass M6RandomDrop跌落GB/T2423.8-1995Single：Height:1.0 Meter;3directions;1timeforeach direction单支天线，高1m；3个方向各1 次 1.Nopartsseparated、 fracture 2.FrequencyTol.≤5% 产品无脱落、断裂;频率偏移≤ 5% pass E3Dimension尺寸Inspectionofdimension,color, material,package,surfaceprocess.检查 尺寸,颜色,材料,包装,表面处理 DirectiveDUTspecification 符合待测物规范 pass E4Temperatureand HumidityChamber 恒温恒湿 GB/T2423.3-2006Temp:80°C/12H; -40°C/12HRH:≥90%;Time:24H温度 80°C测试12H转-40°C测试12H；湿度≥ 90%；时间24H After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.≤5% 恢复2H后，无明显外观不良; 频率偏移≤5% pass E5ThermalShock冷 热冲击 GB/T2423.22-2008-40°C(30minutes) to+80°C(30minutes)；Cycles:24 -40°C测试30分转80°C测试30分为一个 周期；共24周期 After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.≤5% 恢复2H后，无明显外观不良; 频率偏移≤5% pass R1Agingtest老化GB/T2423.2-2008Temp:80°C;Time:24 hours 温度80°C，测试24H After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.≤5% 無明顯外觀不良;頻率偏移≤5% pass M1RoHSWithReferencetoIEC62321:2008with flowchart 参考IEC62321测试流程 DirectiveRoHS2015/863/EU 符合RoHS2015/863/EU标准 pass 深圳市亚冠无线技术有限公司 ShenzhenyaguanwirelesstechnologyCo.Ltd 12 8.产品包装规范Codeforproductpackaging 产品名称/规格 一、标签要求 ************ 采购单号*************采购单号************* 物料编码*****************物料编码***************** 品名规格********品名规格******* 数量/单位*****数量/单位***** 备注*************备注************* 二、装箱要求 作业说明： 1．内包装： 产品按实际数量PCS一小袋 2．外包装： 根据实际数量定数量/箱 注意事项： 1．是否要增设隔板、珍珠棉； 2．标签的贴附，如ROHS等；

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlyto thesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20240801615E Applicant: ShenzhenHollylandTechnologyCo.,Ltd. AddressofApplicant: 8F,Building5D,SkyworthInnovationValley,TangtouRoad,ShiyanStreet, BaoanDistrict,Shenzhen,518055China EquipmentUnderTest(EUT): Product: Full-DuplexWirelessIntercomSystem ModelNo.: SolidcomSE,SolidcomSE-2S,SolidcomSE-4S,SolidcomSE-5S TestModelNo.:SolidcomSE BrandName: HOLLYLAND,HOLLYVIEW,HOLLYVOX FCCID: 2ADZC-5601RA Standards:47CFRPart15,SubpartC KDB558074D0115.247MeasGuidancev05r02 ANSIC63.10:2013 DateofReceipt:2024-08-06 DateofTest: 2024-08-06to2024-08-21 DateofIssue:2024-08-21 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. TestedBy: (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (AlexWang) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:2of57 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20240801615ERev.01 Initialreport 2024-08-21 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:3of57 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement47CFRPart15.203/PASS ACPowerLineConducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.10-2013PASS ConductedPeakOutput Power 47CFRPart15.247ANSIC63.10-2013PASS 20dBOccupiedBandwidth47CFRPart15.247ANSIC63.10-2013PASS CarrierFrequencies Separation 47CFRPart15.247ANSIC63.10-2013PASS HoppingChannelNumber47CFRPart15.247ANSIC63.10-2013PASS DwellTime47CFRPart15.247ANSIC63.10-2013PASS PseudorandomFrequency HoppingSequence 47CFRPart15.247ANSIC63.10-2013PASS Band-edgeforRF ConductedEmissions 47CFRPart15.247ANSIC63.10-2013PASS RFConductedSpurious Emissions 47CFRPart15.247ANSIC63.10-2013PASS RadiatedSpurious emissions 47CFRPart15.209ANSIC63.10-2013PASS Restrictedbandsaround fundamentalfrequency (RadiatedEmission) 47CFRPart15.205/15.209ANSIC63.10-2013PASS Remark: Thetestedsample(s)andthesampleinformationareprovidedbytheclient. Tx:InthiswholereportTx(ortx)meansTransmitter. Rx:InthiswholereportRx(orrx)meansReceiver. RF:InthiswholereportRFmeansRadiatedFrequency. CH:InthiswholereportCHmeanschannel. Volt:InthiswholereportVoltmeansVoltage. Temp:InthiswholereportTempmeansTemperature. Humid:InthiswholereportHumidmeanshumidity. Press:InthiswholereportPressmeansPressure. N/A:Inthiswholereportnotapplication ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:4of57 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3ADDITIONALINSTRUCTIONS........................................................................................................................................7 4.4TESTENVIRONMENT...................................................................................................................................................8 4.5DESCRIPTIONOFSUPPORTUNITS...............................................................................................................................8 4.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................................9 4.7TESTLOCATION........................................................................................................................................................10 4.8TESTFACILITY..........................................................................................................................................................10 4.9ABNORMALITIESFROMSTANDARDCONDITIONS......................................................................................................10 4.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER..........................................................................................10 4.11EQUIPMENTLIST.....................................................................................................................................................11 5TESTRESULTSANDMEASUREMENTDATA.....................................................................................................12 5.1ANTENNAREQUIREMENT..........................................................................................................................................12 5.2CONDUCTEDEMISSIONS............................................................................................................................................13 5.3CONDUCTEDPEAKOUTPUTPOWER.........................................................................................................................17 5.420DBOCCUPIEDBANDWIDTH........................................................................…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:51of57 7Photographs-EUTConstructionalDetails ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:52of57 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:53of57 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:54of57 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:55of57 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:56of57 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801615E Page:57of57 ***ENDOFREPORT***

Setupphotos 1Photographs-EUTTestSetup 1.1RadiatedEmission 9KHz~30MHz: 30MHz~1GHz: Above1GHz: 1.2ConductedEmission