2ADZRBEACON19NOKIA WiFi Beacon 19

Nokia Shanghai Bell Co. Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: July 22, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Nokia Shanghai Bell Co. Ltd. certifies that the equipment FCC ID: 2ADZRBEACON19 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Nokia Shanghai Bell Co. Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ________________________ Name: Yong Tu E-mail: [email protected]

Nokia Shanghai Bell Co. Ltd. Date: July 22, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2ADZRBEACON19 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Contact Person: Yong Tu E-mail: [email protected]

Nokia Shanghai Bell Co. Ltd. Date: July 22, 2024 Power of Attorney To whom it may concern, Please be notified that I, Yong Tu , have designated Jim Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jim Tsai in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: 2ADZRBEACON19 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Yong Tu E-mail: [email protected]

Φ Φ Φ Nokia WiFi RESET 5015579 A / V I.C.T.E. Network: XXXXXXXXXXXX Wi-Fi Key: XXXXXXXXXXXX Admin IP: XXXXXXXXXXXX Username: XXXXXXXXXXXX Password: XXXXXXXXXXXX Indoor Use Only MAC: MM:MM:MM:SS:SS:SS ICS:00 MRev:00 MFG Year:00 SN: XXXXXXXXXXXX Wk:00 Model: Beacon 19 Input: 12V DC 3A FCC ID: 2ADZRBEACON19 Assembled in Vietnam

Sporton International Inc.(Kunshan) Page Number : 1 of 21 TEL : +86-512-57900158 Report Issued Date : Aug. 12, 2024 FCC ID : 2ADZRBEACON19 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC452305 FCC Test Report APPLICANT : Nokia Shanghai Bell Co., Ltd. EQUIPMENT : NOKIA WiFi Beacon 19 BRAND NAME : NOKIA MODEL NAME : Beacon 19 FCC ID : 2ADZRBEACON19 STANDARD : 47 CFR Part 15 Subpart B CLASSIFICATION : Certification TEST DATE(S) : May 27, 2024 ~ Jun. 06, 2024 We, Sporton International Inc. (Kunshan), would like to declare that the tested sample has been evaluated in accordance with the test procedures given in ANSI C63.4-2014 and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc.(Kunshan) Page Number : 2 of 21 TEL : +86-512-57900158 Report Issued Date : Aug. 12, 2024 FCC ID : 2ADZRBEACON19 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC452305 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1. GENERAL DESCRIPTION .......................................................................................................................... 5 1.1. Applicant ............................................................................................................................................ 5 1.2. Manufacturer ..................................................................................................................................... 5 1.3. Product Feature of Equipment Under Test ....................................................................................... 5 1.4. Product Specification of Equipment Under Test ............................................................................... 6 1.5. Modification of EUT ........................................................................................................................... 6 1.6. Test Location ..................................................................................................................................... 6 1.7. Test Software .................................................................................................................................... 7 1.8. Applicable Standards ........................................................................................................................ 7 2. TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1. Test Mode ......................................................................................................................................... 8 2.2. Connection Diagram of Test System ................................................................................................ 9 2.3. Support Unit used in test configuration and system .......................................................................... 9 2.4. EUT Operation Test Setup .............................................................................................................. 10 3. TEST RESULT ........................................................................................................................................... 11 3.1. Test of AC Conducted Emission Measurement .............................................................................. 11 3.2. Test of Radiated Emission Measurement ....................................................................................... 15 4. LIST OF MEASURING EQUIPMENT ........................................................................................................ 20 5. MEASUREMENT UNCERTAINTY ............................................................................................................ 21 APPENDIX A. SETUP PHOTOGRAPHS ....................................................................................................... A1 Sporton International Inc.(Kunshan) Page Number : 3 of 21 TEL : +86-512-57900158 Report Issued Date : Aug. 12, 2024 FCC ID : 2ADZRBEACON19 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC452305 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FC452305 Rev. 01 Initial issue of report Aug. 12, 2024 Sporton International Inc.(Kunshan) Page Number : 4 of 21 TEL : +86-512-57900158 Report Issued Date : Aug. 12, 2024 FCC ID : 2ADZRBEACON19 Report Version : Rev. 01 Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC452305 SUMMARY OF TEST RESULT Report Section FCC Rule Description Limit Result Remark 3.1 15.107 AC Conducted Emission < 15.107 limits PASS Under limit 11.88 dB at 0.156 MHz 3.2 15.109 Radiated Emission < 15.109 limits PASS Under limit 4.20 dB at 250.190 MHz Conformity Assessment Condition: The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. Please refer to each test results in the section “Measurement Uncertainty”. Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shal…

Text truncated - open the document above for the full version.