2AE25Q100Wireless Charging Pad

CyonGear Wireless Charging pad Thank you for purchasing. In order to let you fully experience the product, detailed instructions are provided in which you can find the product's introduction, usage and other information. Before using this product, please carefully read the manual for proper usage. Safety Information To prevent injury to others, yourself and damage to your device, please read the safety information about your device before use. You are responsible for any injury or property damaged caused by failure to comply with safety precautions and regulations. 。Do not use damaged power cords, plugs, or loose electrical sockets 。Do not touch the power cords with wet hands or disconnect the charger by pulling the cord 。Do not store your device with metal objects, such as coins, keys and necklaces 。Your device may overheat - if your device is overheat- ing, please refrain from using your device for a period of time 。Prolonged exposure to an overheated device may cause low temperature burn symptoms, such as red spots and pigmentation. 。Do not store your device near heaters, microwaves, hot cooking equipment or high pressure containers - your device may overheat and cause a fire. 。Do not drop your charger or the device 。Please store your device only on flat surfaces 。Keep your device dry; humidity and liquids may damage the parts or electronic circuits inside your device 。Do not disassemble, modify, or repair your device; device may malfunction and your risk of electric shock is increased To fully turn off the device, you must remove the USB power adapter from the wall socket or remove the cord from your computer. Wireless Charger User Guide Wirelessly charge your smartphone- simply put your wireless charging-enabled device on the charging pad. 。Package Contents: Wireless charging pad, power cable 。Power Supply: Plug into your computer or a USB power adapterfor power supply 。Operation: Connect the wireless charger to an USB power adapter or computer. Place your device on the charging pad; red and green LED lights will stay solid. once device is placed onto the charging pad, the green LED light will blink. If charging pad does not recognize your device, please reposition it. Specifications: I) Input: 4.8 - 5.2V 1500-2000mA 2) Output: DC 5V 1OOOmA 3) Dimensions: 14.5 cm (14Smm)x8.5 cm (85mm) x 1 cm (10mm) 4) Compatible to wireless charging enabled devices: Nokia Lumia 102019201928, HTC 8X HTC Droid DNA, HTC Rzound, HTC Incredible 4G LTE, Moto Droid Turbo, Motorola Moto 360 Smart Watch, Moto Droid Maw Droid Mini, Google Nexus 4151617, LG G2, Samsung Galaxy 56/56 Edge 5) Devices that require wireless charging compatible receivers: Samsung Galaxy Note 41312, Galaxy 53/54/55, iPhone 616 PlusISs/5d4/4s, Nokia 92517201820 6) Charging frequency: 100-200 KHz 7) Wireless distance: 0-1 Omm 8) Efficiency: more than 73% 9) Wireless charging power:＜5W 10) Product certification: CE/FCC/ROHS FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Shen Zhen Eloge Technology Co.,LTD 2015/6/03 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Shen Zhen Eloge Technology Co.,LTD hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product description: Wireless Charging Pad model name: Q100, Q200, Q300, Q400, Q500, Q600, Q700, Q800, Q900. Trademark: FCC ID: 2AE25Q100 Sincerely, Client’s signature Client’s name / title : Futing Liu/manager Contact information / address: 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526- 1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 Shen Zhen Eloge Technology Co.,LTD 2015/6/03 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AE25Q100 We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title : Futing Liu/manager Contact information / address: 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China

Shen Zhen Eloge Technology Co.,LTD Model Difference FCC ID: 2AE25Q100 Model : Q100, Q200, Q300, Q400, Q500, Q600, Q700, Q800, Q900. All the models are the same circuit and RF module, except the mode names. Regards Sincerely Client’s signature Client’s name / title : Futing Liu/manager Contact information / address: 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China

Shenzhen BCTC Technology Co., Ltd. FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page1 of 5 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Shenzhen BCTC Technology Co., Ltd. FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page2 of 5 Photo 3 Photo 4 Shenzhen BCTC Technology Co., Ltd. FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page3 of 5 Photo 5 Photo 6

Model: Q100 FCC ID: 2AE25Q100 This device complies with Part 15 of the FCC Rules. Operationi s subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept anyi nterference received, including interference that may cause unde sired operation. Shen Zhen Eloge Technology Co.,LTD

Shenzhen BCTC Technology Co., Ltd. FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page4 of 5 Photo 7 Photo 8 Shenzhen BCTC Technology Co., Ltd. FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page5 of 5 Photo 9 Photo 10

Shenzhen BCTC Technology Co., Ltd. BCTC-15050071 RF EXPOSURE REPORT For FCC ID: 2AEZPQ100 Product Name: Wireless Charging Pad Trademark: Model Number: Q100 Q200, Q300, Q400, Q500, Q600, Q700, Q800, Q900. Prepared For : Shen Zhen Eloge Technology Co.,LTD Address : 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China Prepared By : Shenzhen BCTC Technology Co., Ltd. Address : No.101,Yousong Road,Longhua New District, Shenzhen,China Nanshan District, Shenzhen, China Test Date: May. 23 - May. 30, 2015 Date of Report : May. 30, 2015 Report No.: BCTC-15050071 Shenzhen BCTC Technology Co., Ltd. BCTC-15050071 Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page 2 of 8 TEST RESULT CERTIFICATION Applicant’s name ................. : Shen Zhen Eloge Technology Co.,LTD Address ................................. : 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China Manufacture's Name ............ : Shen Zhen Eloge Technology Co.,LTD Address ................................. : 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China Product description Product name ............................ : Wireless Charging Pad Trademark ........................... : Model and/or type reference : Q100 Serial Model : Q200, Q300, Q400, Q500, Q600, Q700, Q800, Q900. Model Difference : All the same,Only model name is different. Standards ............................. : FCC CFR 47 part1, 1.1307(b), 1.1310 This device described above has been tested by BCTC, and the test results show that the equipment under And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of BCTC, this document may be altered or revised by BCTC, personal only, and shall be noted in the revision of the document. Date of Test: May. 30 - Jun. 06, 2015 Prepared by(Engineer): Reviewer(Quality Manager): Approved & Authorized Signer(Manager): Shenzhen BCTC Technology Co., Ltd. BCTC-15050071 Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page 3 of 8 Table of Contents Page 1 . GENERAL INFORMATION 4 1.1 . Independent Operation Mode 4 1.2 . Test Supporting System 4 2 .LIST OF TEST AND MEASUREMENT INSTRUMENTS 5 2.1 . For conducted emission at the mains terminals test 5 3. METHOD OF MEASUREMENT 6 3. 1.Applicable Standard 6 4. TEST RESULT 6 4.1. Conducted Emission at the Mains Terminals Test 6 4.2. Equipment Approval Considerations: 7 4.3. E and H field Strength 7 5. PHOTOGRAPHS OF TEST SET-UP 8 Shenzhen BCTC Technology Co., Ltd. BCTC-15050071 Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page 4 of 8 1. GENERAL INFORMATION 1.1. Independent Operation Mode The basic operation mode is: 1.1.1. Charging 1.2. Test Supporting System Adapter Description : Switching Adapter Model No. : K05050-2 Power Input : AC 100-240V~50/60Hz 0.15A Output : DC 5.0V/ 500mA USB Line : Unshielded, Detachable 0.5m Mobile phone Model No. : iPhone 5 Battery model: AE4026 electric quantity:50% Shenzhen BCTC Technology Co., Ltd. BCTC-15050071 Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page 5 of 8 2.LIST OF TEST AND MEASUREMENT INSTRUMENTS 2.1. For conducted emission at the mains terminals test Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Exposure Level Tester Narda ELT-400 N-0231 Aug. 08,13 Aug. 07,15 Magnetic field probe 100cm2 Narda B-Field Probe 100cm2 M0675 Aug. 08,13 Aug. 07,15 843 Chamber ETS 843 84301 Aug. 27,14 Aug. 26,15 Shenzhen BCTC Technology Co., Ltd. BCTC-15050071 Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page 6 of 8 3. METHOD OF MEASUREMENT 3. 1.Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure is calculated. According KDB680106 D01v02: RF Exposure Wireless Charging Apps v02. 4. TEST RESULT 4.1. Conducted Emission at the Mains Terminals Test Test Procedure: a) The RF exposure test was performed on 360 degree turn table in anechoic chamber. b) The measurement probe was placed at test distance (10cm) which is between the edge of the charger and the geometric centre of probe. c) The turn table was rotated 360d degree to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. e) The EUT were measured according to the dictates of KDB 680106D01v02. Shenzhen BCTC Technology Co., Ltd. BCTC-15050071 Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page 7 of 8 4.2. Equipment Approval Considerations: The EUT does comply with item 5.2 of KDB 680106 D01v02 a) Power transfer frequency is less than 1MHz Yes; the device operate in the frequency range from 100 KHz to 200 KHz b)Output power from each primary coil is less than 5 watts Yes; the maximum output power of the primary coil is 4.9W<5W. c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that able to detect and allow coupling onlybetween individual pair of coils. Yes; the transfer system includes only single primary and secondary coils. d) Client device is inserted in or placed directly in contact with the transmitter. Yes; Client device is placed directly in contact with the transmitter. e) The maximum coupling surface area of the transmit (charging) device: Yes; The EUT coupling surface area was 85 cm2(Dimensions: 10 cm x8.5 cm)L x W f) Aggregate leakage fields at 10cm surrounding the device from all simultaneous transmitting coilsare demonstrated to be less than 30% of the MPE limit. Yes; The EUT field strength lev…

Text truncated - open the document above for the full version.

Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC-15050070 FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page1 of 22 FCC TEST REPORT FCC ID: 2AE25Q100 Product Name: Wireless Charging Pad Trademark: Model Number: Q100 Q200, Q300, Q400, Q500, Q600, Q700, Q800, Q900. Prepared For : Shen Zhen Eloge Technology Co.,LTD Address : 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China Prepared By : Shenzhen BCTC Technology Co., Ltd. Address : A. Floor 3, 44 Building, Tanglang Industrial Park B, Taoyuan Street, Nanshan District, Shenzhen, China Test Date: May. 30 - Jun. 06, 2015 Date of Report : Jun. 06, 2015 Report No.: BCTC-15050070 Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC-15050070 FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page2 of 22 TABLE OF CONTENTS TEST REPORT DECLARATION .................................................................................................. 3 1. GENERAL INFORMATION ....................................................................................................... 4 1.1. Report information .................................................................................................................................. 4 1.2. Measurement Uncertainty ....................................................................................................................... 4 1.3. Test Facility ............................................................................................................................................ 4 1.4. Test Uncertainty ...................................................................................................................................... 4 2. PRODUCT DESCRIPTION ......................................................................................................... 5 2.1. EUT Description ..................................................................................................................................... 5 2.2. Block Diagram of EUT Configuration ................................................................................................... 5 2.3. Test Conditions ....................................................................................................................................... 5 2.4. Description Of Support Units (Conducted Mode) .................................................................................. 5 3. TEST RESULTS SUMMARY ..................................................................................................... 6 4. TEST EQUIPMENT USED.......................................................................................................... 7 4.1. For Conducted Emission Test ................................................................................................................. 7 4.2. For Radiated Emission Measurement ..................................................................................................... 7 5. CONDUCTED EMISSION TEST ............................................................................................... 8 5.1. Block Diagram of Test Setup ................................................................................................................. 8 5.2. Test Standard .......................................................................................................................................... 8 5.3. Conducted Emission Limit (Class B) ..................................................................................................... 8 5.4. EUT Configuration on Test .................................................................................................................... 8 5.5. Operating Condition of EUT .................................................................................................................. 8 5.6. Test Procedure ........................................................................................................................................ 9 5.7. Test Result .............................................................................................................................................. 9 6. RADIATED EMISSION MEASUREMENT ............................................................................ 12 6.1. Block Diagram of Test Setup ............................................................................................................... 12 6.2. Test Standard ........................................................................................................................................ 12 6.3. Radiated Emission Limit(Class B) ....................................................................................................... 12 6.4. EUT Configuration on Test .................................................................................................................. 13 6.5. Test Procedure ...................................................................................................................................... 13 6.6. Test Result ............................................................................................................................................ 13 APPENDIX I (PHOTOS OF THE EUT) ...................................................................................... 17 APPENDIX II (TEST PHOTOS OF THE EUT) ......................................................................... 20 Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC-15050070 FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page3 of 22 TEST REPORT DECLARATION Applicant : Shen Zhen Eloge Technology Co.,LTD Address : 3rd floor,Building 2,YuCheng Industrial Park, Quter RingRoad,ShiLongZai,ShiYan Town, ShenZhen City,GuangDong,China EUT Description : Wireless Charging Pad Model Number : Q100 Test Standards: FCC Part 15 C: 2014 The EUT described above is tested by US to determine the ma…

Text truncated - open the document above for the full version.

Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC-15050070 FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page21 of 22 9KMz-30MHz 30MHz-1GMz Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC-15050070 FCC Report Tel: 400-788-9558 0755-33019988 Web:Http//www.bctc-lab.com Page22 of 22 ※※※※※ END OF REPORT ※※※※※