2AE5MSKI1MSKI1M

The Bluetooth® word mark and logos ar e register ed tr ademarks owned by Bluetooth SIG, Inc. and any use of such marks by Euro-CB is under license. Other trademarks and trade names are those of their respective owners. The Skitooth is a stereo headphone system with an integrated microphone. Its two connected headphones can be positioned in few seconds on any ski helmet. With its two high-performance speakers, you enjoy your music and postcasts with exceptional audio quality. The performance of its top-of-the-range speakers allows for rich sound and incredible bass reproduction. Thanks to the positioning of the speakers over your ears, you have absolute comfort and you are not cut off from surrounding noise for better safety. The Skitooth is also equipped with an integrated microphone for your phone communications. You can accept your calls very easily by pressing any of the two buttons. The large size of these buttons allows you to pick up the phone without having to remove your gloves. For your safety, we advise you to call at very low speed or when stationary. SPECIFICATIONS: Bluetooth compliance:Bluetooth version 5.1 Multipairing: • Maximum 8 phones paired • 1 phone connected at a time Operating range: 10 meters (Bluetooth standard) Frequency range: 2.402 - 2.480 GHz Power: -2.4 dBm EIRP Battery type: 200 mAh Li-Po Music playing time: 15 hours Charging time: 2 hours (depending on charger) Operating temperature: 0 to 45°C Charging temperature: 10 to 40°C DC input: 5VDC 0.1A Storage temperature: -10 to 60°C Accessories: • 1 USB cable • User’s guide EN V1.7 Skitooth Quick Guide ON/OFF Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems). This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. This product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and damage the product. Please contact the local recycling facility for removal of the battery. The embedded, non-replaceable battery is designed to last the life time of the product. Federal Communications Commission (FCC) Statement Industry Canada (IC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions : 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. FCC/IC RF Radiation Exposure Statement : This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Hereby, EURO COMMUNICATION EQUIPEMENTS declares that the radio equipment type SKI1M is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.SuperTooth.net/download Euro Communication Equipements sas Route de Foix D117 11 500 NEBIAS FRANCE CAUTION: – The disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. – Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. – A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. Model: SKI1M TO ERASE PAIRED DEVICES: - From OFF, long press (1)Vol- / Power button until the (3)LED indicator alter nately flashes red / blue (7sec.) - Long Press (2)Vol+ Button until (3)LED indicator turns red and Skit ooth automatically turns OFF. ON…

Text truncated - open the document above for the full version.

Bluetooth® est une marque déposée de Bluetooth SIG, U.S.A. et mise à la diposition d’E uro-CB sous licence. Les autres noms de produits et de sociétés mentionnés sont des marques déposées ou des noms commerciaux appartenant à leurs proprétaires respectifs. Skitooth est un système d'écouteurs stéréo avec micro intégré. Ses deux écouteurs reliés entre-eux se positionnent en quelques secondes sur n'importe quel casque de ski. Avec ses deux haut-parleurs haute performance, vous profitez de vos musiques et postcasts avec une qualité audio exceptionnelle. Le rendement de ses haut-parleurs haut de gamme autorise une richesse de son et une restitution des basses incroyables. Grace au positionnement des haut-parleurs sur vos oreilles, vous avez un confort absolu et vous n'êtes pas coupé des bruits environnants pour une meilleure sécurité. Le Skitooth est aussi équipé d'un micro intégré pour vos communications téléphoniques. Vous pouvez accepter vos appels très facilement en appuyant sur n'importe lequel des deux boutons. La grande taille de ces boutons vous permet de décrocher sans avoir à retirer ses gants. Pour votre sécurité, nous vous conseillons de téléphoner à vitesse très réduite où à l'arrêt. SPÉCIFICATIONS: Protocole Bluetooth: Bluetooth version 5.1 Model: SKI1M Multipairages: • 8 téléphones pairés au maximum • 1 téléphone connecté à la fois Portée Bluetooth: 10 mètres (standard Bluetooth) Fréquence: 2.402 - 2.480 GHz Puissance: -2.4 dBm EIRP Type de batterie: 200 mAh Li-Po Autonomie en écoute de musique: 15 heures Temps de charge: 2 heures (dépend du chargeur) Température d’utilisation: 0 à 45°C Température de charge: 10 à 40°C Alimentation: 5VDC 0.1A Température de stockage: -10 à 60°C Fourni avec: • 1 cable USB • Notice FR V1.7 Skitooth Mode d'emploi ON/OFF Comment éliminer ce produit (Equipement électrique et électronique usagé) (Applicable dans les pays de l’Union Européenne et dans les autres pays européens disposant de systèmes de collecte sélective). Ce symbole sur le produit ou sa documentation indique qu’il ne doit pas être éliminé en fin de vie avec les autres déchets ménagers. L’élimination incontrôlée des déchets pouvant porter préjudice à l’environnement ou à la santé humaine, veuillez le séparer des autres types de déchets et le recycler de façon responsable. Vous favoriserez ainsi la réutilisation durable des ressources matérielles. Les particuliers sont invités à contacter le distributeur leur ayant vendu le produit ou à se renseigner auprès de leur mairie pour savoir où et comment ils peuvent se débarrasser de ce produit afin qu’il soit recyclé en respectant l’environnement. Les entreprises sont invitées à contacter leurs fournisseurs et à consulter les conditions de leur contrat de vente. Ce produit ne doit pas être éliminé avec les autres déchets commerciaux. Ce produit contient une batterie non remplaçable. N’essayez pas d’ouvrir le produit ou d’enlever la batterie car cela endommagerait le produit. Veuillez contacter le centre de recyclage le plus proche pour collecter la batterie. La batterie non-remplaçable est conçue pour durer autant que le produit. Commission Federale des Communications (FCC) Déclaration Industrie Canada (IC) 15,21 Vous êtes averti que les changements modications non expressément approuvés par la partie responsable de la conformité pourraient annuler l'autorité de l'utilisateur d'exploiter cet équipement. 15.105 (b) Cet équipement a été testé et jugé conforme aux limites pour un appareil numérique de classe B, conformément à la partie 15 des règles de la FCC / IC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'existe aucune garantie que ces interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception radio ou télévision, ce qui peut être déterminé en éteignant et rallumant l'équipement, l'utilisateur est encouragé à essayer de corriger l'interférence par une ou plusieurs des mesures suivantes: - Réorienter ou déplacer l'antenne réceptrice. - Augmenter distance entre l'équipement et le récepteur. - Brancher l'équipement dans une sortie sur un circuit différents-de celui sur lequel est branché le récepteur. - Consulter le revendeur ou un technicien radio / TV qualifié. Cet appareil est conforme a la partie 15 des regles FCC et aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'opération est soumise aux deux conditions suivantes: 1) Cet appareil ne peut causer d'interférences et 2) Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. FCC / IC Déclaration d'exposition aux radiations RF: Cet équipement est conforme aux normes FCC / IC limites d'exposition aux radiations dans un environnement non contrôlé. Les utilisateurs doivent suivre les instructions de fonctionnement spéciques de la conformité d'exposition aux RF. Cet émetteur ne doit pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Le soussigné, EURO COMMUNICATION EQUIPEMENTS, déclare que l'équipement radioélectrique du type SKI1M est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: http://www.SuperTooth.net/download Euro Communication Equipements sas Route de Foix D117 11 500 NEBIAS FRANCE MISE EN GARDE: – Déposer une batterie dans le feu ou dans un four chaud, écraser ou découper une batterie est susceptible de provoquer une explosion. – L’exposition à une température extrêmement élevée peut entraîner une explosion ou la fuite de liquide ou de gaz inflammable. – L’expositio…

Text truncated - open the document above for the full version.

EuroCB (Phils.), Inc. Date: 2021-05-08 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:2AE5MSKI1M To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with EuroCB (Phils.), Inc. This authorization is valid until further written notice from the applicant. Print Name: Michel MarchantTitle: President Signature: On behalf of Company: EuroCB (Phils.), Inc. Telephone: 63323400335 E-mail: [email protected]

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name EuroCB (Phils.), Inc. Address SFB2, MEPZ1,Lapulapu City 6015,Philippines Grantee Code 2AE5M FCC ID 2AE5MSKI1M Authorized Contact Name Michel Marchant Contact Email [email protected] Contact Phone 63323400335 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1)the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2)the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3)the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:Date: 2021-05-11 Print Name:Michel Marchant Title:President *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

EuroCB (Phils.), Inc. TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AE5MSKI1M LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Bill Of Materials Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Michel MarchantTitle: President Signature: On behalf of Company: EuroCB (Phils.), Inc. Telephone: 63323400335 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZCR2104020657AT FCC ID: 2AE5MSKI1M SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

SKI1M LABEL 31mm 13mm SKI1M label position and dimension 31mm x 13mm

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZCR2104020657AT FCC ID: 2AE5MSKI1M SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065703 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZCR2104020657AT Applicant: EuroCB (Phils.), Inc. Address of Applicant: SFB2, MEPZ1, Lapulapu City, 6015 Philippines Manufacturer: EuroCB (Phils.), Inc. Address of Manufacturer: SFB2, MEPZ1, Lapulapu City, 6015 Philippines Factory: Euro CB (Phils.) Inc. Address of Factory: SFB No 2, MEZ 1, Lapu Lapu City, 6015 Cebu, Philippines Equipment Under Test (EUT): EUT Name: SKI1M Model No.: SKI1M Trade mark: Supertooth FCC ID: 2AE5MSKI1M Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2021-04-21 Date of Test: 2021-04-24 to 2021-05-06 Date of Issue: 2021-05-10 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065703 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2021-05-10 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065703 Page: 3 of 6 3 Contents Page 1 COVER PAGE .............................................................................................................................................. 1 2 VERSION ...................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................. 3 4 GENERAL INFORMATION .......................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION ...................................................................................................................................... 5 4.3 TEST FACILITY ........................................................................................................................................ 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 5 5 SAR EVALUATION ...................................................................................................................................... 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 6 5.1.1 Standard Requirement ..................................................................................................................... 6 5.1.2 Limits ................................................................................................................................................ 6 5.1.3 EUT RF Exposure ............................................................................................................................ 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065703 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power supply: Input: DC 5.0V from Type C port DC 3.7V Lithium-ion 200mAh 3.7Wh rechargeable battery (to be charged from Type C port) Cable(s): Type C Cable: 100cm, Unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.1 Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Antenna Type: PCB Antenna Antenna Gain: 1.6dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065703 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065703 Page: 6 of 6 5 SAR Evaluat…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065702 Page: 1 of 84 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2104020657AT Applicant: EuroCB (Phils.), Inc. Address of Applicant: SFB2, MEPZ1, Lapulapu City, 6015 Philippines Manufacturer: EuroCB (Phils.), Inc. Address of Manufacturer: SFB2, MEPZ1, Lapulapu City, 6015 Philippines Factory: Euro CB (Phils.) Inc. Address of Factory: SFB No 2, MEZ 1, Lapu Lapu City, 6015 Cebu, Philippines Equipment Under Test (EUT): EUT Name: SKI1M Model No.: SKI1M Trade Mark: Supertooth FCC ID: 2AE5MSKI1M Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2021-04-21 Date of Test: 2021-04-24 to 2021-05-06 Date of Issue: 2021-05-10 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065702 Page: 2 of 84 Revision Record Version Chapter Date Modifier Remark 01 2021-05-10 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065702 Page: 3 of 84 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Emission Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402065702 Page: 4 of 84 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 12 6.1 ANTENNA REQUIREMENT .................................................................................................................... 12 6.1.1 Test Requirement: ....................................................…

Text truncated - open the document above for the full version.