2AE7E-XM11801Intelligent eye Protection Device for Pad

Intelligent eye protection device for pad USER’S MANUAL Product Statement Li‐ion Battery Safety 1. This equipment is equipped with sealed, built‐in battery. Please do not replace the battery, so as to avoid damage to the battery or equipment. The battery can only be replaced by the authorized service center. 2. Do not use metal conductor dock with the cell poles, or contact the endpoint of the battery, so as not to cause short circuit batteries, and burns caused by battery overheat body damage. 3. Do not use the battery exposed to high temperature or heating equipment, such as sunshine, heaters, microwave oven, oven or water heater, etc. Batteries overheating may cause explosion. 4. Do not disassemble or refit the battery, insert foreign bodies, or immersed in water or other liquid, lest cause battery leakage, overheating, fire or explosion. 5. If the battery leakage, please do not make the skin or eyes contact with leaking liquid. If contact with skin or eyes, please rinse immediately with water, and to go to the hospital for medical treatment. 6. Do not throw the battery into the fire, otherwise it will cause the battery fire and explosion. 7. Please handle the battery in accordance with local regulations, Don't put the battery as life garbage disposal. If the battery disposal incorrectly may cause the battery explosion. 8. Do not let children or pet biting battery in order to avoid the damage or cause the battery explosion 9. Please do not drop, extrusion or puncture battery. To avoid the battery under external pressure, may cause the battery internal short circuit and overheating. 10. Do not use the battery have been damaged. Using occasions 1. Have expressly forbids the use of wireless devices, do not use this device, otherwise it will interfere with other electronic equipment or cause other hazards. 2. Wireless devices may interfere with the aircraft's flight system, please abide by the guidelines, the airline where to ban the use of wireless devices, do not use the equipment. 3. Do not use in damp or close to the magnetic field equipment, lest cause circuit inside the equipment malfunction. 4. Please do not use this equipment in thunderstorm weather. The thunderstorm weather may lead to equipment failure or electric shock hazards. 5. Do not use near heat source or naked fire equipment, such as electric heaters, microwave oven, oven, water heater, the fire, the candles or other high temperature may be produced. 6. Please do not let children or pet biting equipment or its parts, so as to avoid the damage or lead to device failure or explosion. 7. Do not use the product in the water, watch in the rain and splashing liquid. Table of Contents Overview ① ③ ② ④ ⑤ ⑥ ⑦ ① Light sensor : used to measure distance and light intensity. ② Button : for user interaction。 ③ Bulge : connect to the silicone shall ④ LED : display the electricity. ⑤ Reset : Through the reset hole can restart the doll ⑥ MicroUSB : it is used for charging through the Micro USB cable. ⑦ Silicone shall : to protect the pad Included in Package 1. Intelligent eye protection device 2. Silicone shall 3. USB cable 4. User’s manual First use Open the “xiaomu” software，Choose a way binding equipment  Choose”自动识别”，Press the button on the device three times, then green light flashing and the buzzer ring than means connected success.  Choose”二维码扫描” ,then use the camera of pad to scan the QR code on the packing box.  Choose”手动输入二维码”，then input the mac ID code of the equipment. Function 1. Measure and record the distance between user and pad. If it’s below the threshold, there will be a reminder 2. Record the length of time of using pad. Timely remind the user to have a rest. 3. Measure and record the light intensity. There will be a reminder when the light is too strong or too weak. 4. By the use of gravity sensor, there will be a reminder when the user use pad in the vibration environment or in the wrong posture. Charge indicator 1. When low power the orange LED flashing. 2. When charging, the orange LED is in the normally on. 3. When fully charged, the green LED is in the normally on. Technical parameters Rated power : 37 mW Bluetooth version : BLE 4.0 Standby time : 45 days Service time : 10 days Charging time : 1.5 hours Battery : 3.7V/310mAh FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device i…

Text truncated - open the document above for the full version.

RF_160, Issue 03 Declaration of Authorization We Name: Changzhou MacallyTech Co.,Ltd Address: Room 10D,Xinjian Building,No.631,Jiangning Road, Jingan District, Shanghai City, China City: Shanghai Country: China Declare that: Name Representative of agent: Tracy Qi Agent Company name: Shenzhen CTL Testing Technology Co., Ltd. Address: Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 City: Shenzhen Country: China is authorized to apply for Certification of the following product(s): Product description: Intelligent eye Protection Device for Pad Type designation: xm01b1, xm01w2, xm01w3, xm01g4, xm01y5, xm01w6, xm01b7, xm01b8, xm01b9, xm01b0, xm01r1, xm01r2, xm01r3, xm01r4, xm01r5, xm01r6, xm01r7, xm01r8, xm01r9, xm01r0, xm01p1, xm01p2, xm01p3, xm01p4, xm01p5, xm01p6, xm01p7, xm01p8, xm01p9, xm01p0 Trademark: epro on our behalf. Date: July 14, 2015 City: Shanghai Name: Zhicheng Li Function: EE Signature:

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Changzhou MacallyTech Co.,LTD Address : Room 10D,Xinjian Building,No.631,Jiangning Road, Jingan District, City: Shanghai City Country: China To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AE7E-XM11801 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: July 15, 2015 Name and signature of applicant: Zhicheng Li Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

FCC ID: 2AE7E‐XM11801

********************** End of Report **********************

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 FCC PART 15 SUBPART C TEST REPORT FCC PART 15.249 Report Reference No.: CTL1507091893-WF Compiled by: ( position+printed name+signature) Jacky Chen (File administrators) Tested by: ( position+printed name+signature) Allen Wang (Test Engineer) Approved by: ( position+printed name+signature) Tracy Qi (Manager) Product Name..............................: Intelligent eye Protection Device for Pad Model/Type reference..................: xm01b1 List Model(s)................................: See page 2 Trade Mark....................................: EPRO FCC ID...........................................: 2AE7E-XM11801 Applicant’s name....................: Changzhou MacallyTech Co.,LTD Address of applicant...................: Room 10D,Xinjian Building,No.631,Jiangning Road, Jingan District, Shanghai City, China Test Firm..................................: Shenzhen CTL Testing Technology Co., Ltd. Address of Test Firm...................: Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 Test specification........................: Standard........................................: FCC Part 15.249:Operation within the bands 920-928 MHz, 2400-2483.5 MHz, 5725-5850 MHz and 24.0 - 24.25 GHz. TRF Originator..........................: Shenzhen CTL Testing Technology Co., Ltd. Master TRF..............................: Dated 2011-01 Date of Receipt.............................: July 05, 2015 Date of Test Date..........................: July 05, 2015 –July 13, 2015 Data of Issue................................: July 14, 2015 Result............................................: Positive Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. V1.0 Page 2 of 27 Report No.: CTL1507091893-WF TEST REPORT Test Report No. : CTL1507091893-WF July, 14, 2015 Date of issue Equipment under Test : Intelligent eye Protection Device for Pad Model /Type : xm01b Listed Models : xm01w2, xm01w3, xm01g4, xm01y5, xm01w6, xm01b7, xm01b8, xm01b9, xm01b0, xm01r1, xm01r2, xm01r3, xm01r4, xm01r5, xm01r6, xm01r7, xm01r8, xm01r9, xm01r0, xm01p1, xm01p2, xm01p3, xm01p4, xm01p5, xm01p6, xm01p7, xm01p8, xm01p9, xm01p0 Applicant : Changzhou MacallyTech Co.,LTD Address : Room 10D,Xinjian Building,No.631,Jiangning Road, Jingan District, Shanghai City, China Manufacturer : Changzhou MacallyTech Co.,LTD Address : Room 10D,Xinjian Building,No.631,Jiangning Road, Jingan District, Shanghai City, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 5. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 27 Report No.: CTL1507091893-WF ** Modifited History ** Revison Description Issued Data Report No. Remark Revsion 1.0 Initial Test Report Release2015-07-14 CTL1507091893-WF Tracy Qi V1.0 Page 4 of 27 Report No.: CTL1507091893-WF Table of Contents Page 1. SUMMARY............................................................................................................................................................ 5 1.1. TEST STANDARDS ..................................................................................................................................................... 5 1.2. TEST DESCRIPTION ........................................................................................................................................................ 5 1.3. TEST FACILITY .............................................................................................................................................................. 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 6 2. GENERAL INFORMATION ....................................................................................................................................... 7 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 7 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 7 2.3. DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 7 2.4. EQUIPMENTS USED DURING THE TEST .............................................................................................................................. 8 2.5. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................................ 8 2.6. MODIFICATIONS ........................................................................................................................................................... 8 3. TEST CONDITIONS AND RESULTS ........................................................................................................................... 9 3.1. CONDUCTED EMISSIONS TEST ......................................................................................................................................... 9 3.2. RADIATED EMISSIONS AND BAND EDGE .......................................................................................................................... …

Text truncated - open the document above for the full version.