2AE82100461-000WIRELESS TRANSMITTER

Scan QR Code for video bregex.com Physical and Electrical Specications Designed to conform to applicable requirements of: IEC60601-1, 3rd Edition Class II, Continuous Operation - Not suitable with flammable anesthetics Unit Rated: 5Vdc, 1000mA LATEX Expected Service Life Recomended operating range of Flex Sensor 0’-10’ (0m-3.05m) 0.5 oz (.015 kg) Sensor Only 100461-000 Flex Sensor 6 months from date of rst use. PRODUCT SPECIFICATIONS Symbols Used on the Breg Flex Instructions for Use Symbol Description Operating Instructions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Refer to instruction manual / booklet IP22 Protected against solid foreign objects of 12.5 mm and greater. Protected against vertically falling water drops when tilted up to 15 . Does not contain latex Transport & Storage: Operating: Standards Compliance: Electrical Classifications: –25°C (–13°F) no humidity control to 70°C (158°F ) up to 93%RH 5°C to 40°C (41°F to 100°F )15-93%RH - 700 hPa to 1060 hPa Manufacturer: Qualtek USA Model: QFAW-05-05 Rated Input: 100-240V~, 50-60Hz Output: 5Vdc, max. 1.0A Power supply is specied as part of ME Equipment Class II Equipment Type BF, applied part WEEE- Waste of Electronic and Electrical Equipment Symbol Description Product #: WeightRecomended Operating Range Environmental Requirements: 2AE82100461-000 FCC ID: iPhone 4S iPhone 5 / 5C / 5S iPhone 6 / 6plus iPod touch (5th Gen) iPad (3rd Gen) iPad Mini iPad Air R Mobile Device Compatibility General safety Keep the micro USB cable and application strap away from the neck to avoid risk of strangulation. No modication of this equipment is allowed. Keep micro USB cable out of pathways to avoid a risk of tripping. Choking hazard, do not place sensor in mouth. Use only as prescribed This product is to be used only in the manner prescribed by your Health Care Practitioner or Physical Therapist for the specic exercise and frequency of treatment. DISPOSAL Dispose of product according to local regulations. WARRANTY Breg, Inc. warrants that this product is free from defects in workmanship, materials, and tness for use for 180 days from initial purchase under normal use for which it was intended and under direct supervision of a licensed healthcare practitioner. INFORMATION FOR PATIENTS & MEDICAL PROFESSIONALS Avoid ammables and oxidizers Do not use in places with ammable vapors or gasses (e.g. ammable anesthetics), high oxygen concentrations, or other oxidizers (e.g. nitrous oxide). Electrical safety Like all electrical products, you must follow precautions to avoid electrocution, re, burns, or other injuries. Use only the charger provided with the Breg Flex system to meet the requirements of EN 60601-1. Protect the micro USB cable and charger Keep the micro USB cable and charger away from heated surfaces. Set up and use this equipment in a low trafc location away from children and pets. Never operate this product if it has a damaged micro USB cable, charger, or plug, which could result in electric shock. If the micro USB cable, charger, or plug is damaged, unplug and contact Breg Customer Care at (888) 290-8481or (800) 321-0607. CLEANING, MAINTENANCE & SERVICE: HOME CLEANING PROTOCOL The Breg Flex Sensor contains no user-serviceable parts. Contact Breg Customer Care for service or replacements. (888) 290-8481or (800) 321-0607 PRODUCT INSERT INDICATIONS FOR USE WARNINGS LED Indicator Light Do not submerge Breg Flex Sensor Breg, Inc.’s obligation under this warranty is limited to the replacement or repair of any defective part or parts of this product. All expressed or implied warranties, including the warranty of merchantability and tness for a particular purpose, are limited to the actual warranty period set forth above. No other warranty, express or implied, is given and no afrmation of or by seller, by words or action, will constitute a warranty. Blink twice/1 secBlink once/1 secSteady Glow Sensor with Micro USB Cable Connected Sensor without Micro USB Cable Connected Pairing with Bluetooth Fully chargedCharging Sensor paired Sensor will automatically turn off after 10 minutes of inactivity Recharge sensor prior to each treatment period Breg Flex is intended for use to assist in tracking the progress of the physical therapy program that has been prescribed by your health care professional. Sensor LED should blink twice every 1 second to indicate it is charging. If the sensor is not charging, ensure power outlet is working and power connections are fully engaged. Troubleshooting Guide: Charging: Pairing: If sensor and your mobile device become unpaired during your therapy, check your app for instructions on continuing. If your app is not responding to either your range of motion, sets or repetitions ensure the sensor light is in a solid state, not blinking. If sensor LED is not coming on during movement or when charging, please call Breg Flex support at (888) 290-8481or (800) 321-0607. Sensor LED should blink once every 1 second to indicate it is pairing. If the sensor is not pairing with your device, try each of the following steps. Ensure the Bluetooth setting on your mobile device is activated. If sensor is not responding, try moving it around to receive a blinking LED signal. If sensor does not respond from movement, plug sensor into charger to ensure sensor is fully charged. If your device Bluetooth setting is on and sensor is still not responding restart your mobile device. While in Use: Electromagnetic interference This Breg Flex Sensor may cause electromagnetic or other interference with other electrical devices. Should this occur, discontinue using the Breg Flex App and contact the Breg Flex Support Group at (888) 290-8481 for further assistance. Keep electrical connections dry and free of debris The electrical connections at the power outlet and from the micro USB cable to the Breg Flex S…

Text truncated - open the document above for the full version.

SCALE 1:1 0.60” diameter PSA NOT TO SCALE A W - 1 . 0 1 1 6 8 R E V A 0 1 1 5 R E F 1 0 0 4 6 1 - 0 0 0 A W - 1 . 0 1 1 6 8 R E V A 0 1 1 5 R E F 1 0 0 4 6 1 - 0 0 0 P/N: AW-1.01168 Description: LABEL SENSOR PSA FLEX Revision: B 0715 F C C I D : 2 A E 8 2 1 0 0 4 6 1 - 0 0 0 F C C I D : 2 A E 8 2 1 0 0 4 6 1 - 0 0 0

NVLAP Lab code: 100414-0 FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR WIRELESS TRANSMITTER MODEL NUMBER: 100461-000 FCC ID: 2AE82100461-000 REPORT NUMBER: 10680918 ISSUE DATE: August 21, 2015 Prepared for BREG INC. 2885 LOKER AVE E. CARLSBAD CA, 92010, USA Prepared by UL LLC 333 PFINGSTEN RD. NORTHBROOK, IL 60062 TEL: (847) 272-8800 REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 2 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC Revision History Rev. Issue Date Revisions Revised By 1.0 August 21, 2015 Initial Issue Joseph McWilliams REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 3 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ............................................................................................. 4 2. TEST METHODOLOGY .................................................................................................................. 5 3. FACILITIES AND ACCREDITATION .......................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .......................................................................................... 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................................. 5 4.2. SAMPLE CALCULATION ............................................................................................................ 5 4.3. MEASUREMENT UNCERTAINTY ............................................................................................... 6 4.4. DESCRIPTION OF TEST SETUP ................................................................................................ 8 5. TEST AND MEASUREMENT EQUIPMENT .............................................................................. 10 6. TEST RESULTS ............................................................................................................................... 11 6.1. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ................................................. 11 6.2. 99% BANDWIDTH ..................................................................................................................... 12 6.3. 20dB BANDWIDTH .................................................................................................................... 16 6.4. RADIATED EMISSIONS............................................................................................................. 20 6.4.1. FUNDAMENTAL FREQUENCY RADIATED EMISSION ............................................ 21 6.4.2. FUNDAMENTAL FREQUENCY RADIATED EMISSION WORST CASE DATA ...... 23 6.4.3. TRANSMITTER RESTRICTED BAND EDGES ............................................................. 24 6.4.4. HARMONICS AND SPURIOUS EMISSIONS ABOVE 1GHz ....................................... 32 6.4.5. SPURIOUS EMISSIONS 30 TO 1000 MHz ...................................................................... 38 7. SETUP PHOTOS .............................................................................................................................. 40 REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 4 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC 1. ATTESTATION OF TEST RESULTS COMPANY NAME: BREG INC 2885 Loker Ave E. CARLSBAD, CA 92010, USA EUT DESCRIPTION: WIRELESS TRANSMITTER MODEL: 100461-000 SERIAL NUMBER: None DATE TESTED: 04-27-15 to 6-17-15 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C Pass UL LLC tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL LLC based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL LLC and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL LLC By: Tested By: Michael Ferrer Joseph McWilliams WiSE Program Manager WiSE Senior Engineer UL LLC UL LLC REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 5 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4-2009, FCC CFR 47 Part 2, FCC CFR 47 Part 15 The EUT was tested at 1.5M height for emissions above 1GHz 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 333 Pfingsten Road, Northbrook, IL 60062 USA. UL NBK is accredited by NVLAP, Laboratory Code 100414-0. The full scope of accreditation can be viewed at http://ts.nist.gov/Standards/scopes/1004140.htm 4. CALIBRATION AND U…

Text truncated - open the document above for the full version.

REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 40 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC 7. SETUP PHOTOS ANTENNA PORT MEASUREMENT SETUP ANTENNA PORT PHOTO REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 41 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS FRONT PHOTO REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 42 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC Y-AXIS BACK PHOTO REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 43 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC Z-AXIS FRONT PHOTO REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 44 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC Z-AXIS Above 1GHz REPORT NO: 10680918 DATE: August 21, 2015 FCC ID: 2AE82100461-000 Page 45 of 45 UL LLC FORM NO: CCSUP4701i 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC END OF REPORT