CLOG500 User Manual ISA – Intelligent Sensing Anywhere Rua Pedro Nunes, Edifício D 3030-199 Coimbra, Portugal Phone: +351 239 791 090 Fax: +351 239 791 099 Email: [email protected] http://www.isasensing.com CLOG500 CLOG500 User Manual i Data Versão Descrição Autor 16/07/2014 V0.01 First release of document. Artur Vieira 03/09/2014 V0.02 Added option for variant EXC5_20XY possibilitie to have possibilitie to have 2 sensors. Artur Vieira 18/09/2014 V1.0 Revision Ester Soares 27/01/2015 V1.01 Changes for FCC certification Artur Vieira 02/03/2015 V2.00 Revision Ester Soares CLOG500 CLOG500 User Manual ii Índice 1 General Information................................................................................................................................................. 1 1.1 CLOG500 Model Numbering ..................................................................................................................... 1 2 FCC PART 15 compliance ...................................................................................................................................... 2 2.1 RF Exposure Information ............................................................................................................................. 3 3 Warnings ....................................................................................................................................................................... 3 4 Maintenance ................................................................................................................................................................ 4 5 Typical Installation procedure ............................................................................................................................. 4 6 Sensor connection .................................................................................................................................................... 5 6.1 CLOG500 supplied with external cable ................................................................................................ 6 7 Placing the CLOG500 ............................................................................................................................................. 6 7.1 Attaching the CLOG500 .............................................................................................................................. 6 7.1.1 Using glue to attach......................................................................................................................... 7 7.1.2 Using cable ties to attach .............................................................................................................. 9 7.2 Possible scenarios ........................................................................................................................................ 10 8 Equipment activation ........................................................................................................................................... 11 8.1 Passing the magnet to activate ............................................................................................................ 11 8.2 Visual Indicators ........................................................................................................................................... 11 8.3 Equipment information ............................................................................................................................. 13 9 CLOG500 configuration ...................................................................................................................................... 13 9.1 Sensor types and input numbers ......................................................................................................... 13 9.1.1 Sensors connect through radio device................................................................................. 14 10 Tips and Tricks ........................................................................................................................................................ 14 CLOG500 CLOG500 User Manual 1 1 General Information The CLOG500 is a multi-purpose autonomous (GSM/CDMA/GPRS based, battery powered) remote management system providing data logging, automatic meter reading and alarms, certified to be used under potential explosive atmospheres. Collected and stored data is sent to a central server via GSM, through SMS or TCP, with a configurable frequency from several times a day to one time per week. This data can be requested by any cell phone using SMS. The system’s supply is obtained through a long life lithium battery which guarantees great autonomy and easiness in installation. 1.1 CLOG500 Model Numbering aaC5_xxyz aa EX = Equipment for Hazardous location (Certified for ATEX, IECEx, USA and Canada) Blank = Generic use equipment xx 1 00 = 3 Inputs (software selectable from analogue or digital) 10 = 2 analog inputs 11 = 1 analog input and 1 digital input 20 = 2 Analog Inputs 30 = 3 Digital Inputs 40 = 1 analog Input and 1 digital input 90 = 1 current (0-20mA) input. 2 Y 3 0 = No modem 3 = 2G Modem 4 = CDMA 1xRTT modem 7 = 2G + GPS modem z 0 = No ISM Band Transceiver 1 = with ISM Band transceiver CLOG500 CLOG500 User Manual 2 1 Check the safety manual for input parameters. 2 This model does not have hazardous location. 2 FCC PART 15 compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against …

Text truncated - open the document above for the full version.

Cover Letter(s)

SGS North America Inc. Consumer Testing Services 620 Old Peachtree Road, Suite 100, Suwanee, GA 30024 t (770) 570-1800 f (770) 277-8187 www.sgs.com/cts Member of the SGS Group (SGS SA) Request for Confidentiality Date: April 2, 2015 Subject: Confidentiality Request for: 2AEAU-ISMTI-V1 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual ______ISA - Intelligent Sensing Anywhere)______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _EMC Manager / Agent for ISA _______David Schramm_____ (Signature/Title ) (Print name)

Cover Letter(s)

SGS North America Inc. Consumer Testing Services 620 Old Peachtree Road, Suite 100, Suwanee, GA 30024 t (770) 570-1800 f (770) 277-8187 www.sgs.com/cts Member of the SGS Group (SGS SA) Limited Modular Approval Letter Date: April 22, 2015 Subject: Limited Modular Approval Request for: 2AEAU-ISMTI-V1 To Whom It May Concern: ISA maintains control of the installation of the module into their devices which were represented by the host device used for testing. The end product will always have the module and antenna assembly installed when it is included as an option. There is no option to purchase the module outside of a product, so there will be no instructions available for OEM installation. Additionally, the antenna used during testing is the only antenna option available. Modular Approval Requirement Yes No (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over- modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X Sincerely, By: _EMC Manager / Agent for ISA _______David Schramm_____ (Signature/Title ) (Print name)

ID Label/Location Info

1 1 2 2 3 3 4 4 DD CC BB AA Date:Revision:Page: Prj Code: Title: Project: Intelligent Sensing Anywhere Designer:Artur Vieira Rua Pedro Nunes - Edifício D 3030-199 Coimbra Portugal CLOG500 cLog500 07/04/2015*of*V1.00 FCC Label description Variant name not interpreted Variant: Schematic Drawing NOTE: Drawings for use in Potential Explosive Atmospheres have a "Ex" Indication. IP79 | ED03 | EN Archive: Project Manager; 10 Years; Order: Product HW Module: DOC Number: FCC Label Ex 75mm (+/- 0.2) 35mm (+/- 0.2) PRINT SPECIFICATION COLOUR: BLACK LABEL: 3M 7813 RIBBON: AS1-Scratch/Solvent resistent resin.

Test Report

Test Report Number: 3710195EMC03 Rev: 1 ISA-Intelligent Sensing Anywhere / EXC5_YYX1 Page: 1 of 16 Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or Testing done by SGS International Electrical Approvals in connection with distribution or use of the product described in this report must be approved by SGS international Electrical Approvals in writing. EMC Test Report Project Number: 3710195 Report Number: 3710195EMC03 Revision Level: 1 Client: ISA-Intelligent Sensing Anywhere Equipment Under Test: ISM Band Module Model Number: EXC5_YYX1 Applicable Standards: FCC 15.249 Operation within the bands 902–928 MHz, 2400–2483.5 MHz, 5725–5875 MHZ, and 24.0–24.25 GHz. ANSI C63.10: 2009 Report issued on: 22 April 2015 Test Result: Compliant Tested by: Jeremy O. Pickens, Senior EMC Engineer Reviewed by: David Schramm, EMC/RF/SAR/HAC Manager Test Report Number: 3710195EMC03 Rev: 1 ISA-Intelligent Sensing Anywhere / EXC5_YYX1 Page: 2 of 16 SGS North America Inc. Consumer Testing Services 620 Old Peachtree Road NW, Suite 100, Suwanee, GA 30024 t (770) 570-1800 www.us.sgs.com/cts Member of the SGS Group (SGS SA Table of Contents 1 SUMMARY OF TEST RESULTS ..................................................................................................................................... 3 1.1 MODIFICATIONS REQUIRED FOR COMPLIANCE .............................................................................................................. 3 2 GENERAL INFORMATION ............................................................................................................................................. 3 2.1 CLIENT INFORMATION ................................................................................................................................................... 3 2.2 TEST LABORATORY ....................................................................................................................................................... 3 2.3 GENERAL INFORMATION OF EUT .................................................................................................................................. 3 2.4 RATINGS AND DECLARATIONS ....................................................................................................................................... 4 2.5 OPERATING MODES AND CONDITIONS .......................................................................................................................... 4 2.6 EUT CONNECTION BLOCK DIAGRAM ............................................................................................................................ 5 2.7 SYSTEM CONFIGURATIONS ............................................................................................................................................ 5 2.8 CABLE LIST ................................................................................................................................................................... 5 3 FIELD STRENGTH OF FUNDAMENTAL ..................................................................................................................... 6 3.1 TEST RESULT ................................................................................................................................................................. 6 3.2 TEST METHOD ............................................................................................................................................................... 6 3.3 TEST SITE ...................................................................................................................................................................... 6 3.4 TEST EQUIPMENT .......................................................................................................................................................... 6 3.5 TEST DATA .................................................................................................................................................................... 7 4 FIELD STRENGTH OF SPURIOUS RADIATION ........................................................................................................ 8 4.1 TEST RESULT ................................................................................................................................................................. 8 4.2 TEST METHOD ............................................................................................................................................................... 8 4.3 TEST SITE ...................................................................................................................................................................... 9 4.4 TEST EQUIPMENT .......................................................................................................................................................... 9 4.5 TEST DATA .................................................................................................................................................................. 10 5 20 DB BANDWIDTH ........................................................................................................................................................ 14 5.1 TEST RESULT ............................................................................................................................................................... 14 5.2 TEST METHOD .............…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Ester Soares(Ms.)

[email protected]+351239791090Fax: +351239791099

Test Firm

SGS North America, Inc.David Schramm

[email protected]973-461-7914Fax: 973 575 7175

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	916.8 MHz - 916.8 MHz	-

Modular Type

Limited Single Modular Approval

Confidentiality

Long Term

Grant Notes

Power listed is conducted. Limited Modular Approval of this Transmitting device with antenna(s) as shown in this filing is allowed for Grantee�s products for integration into their host products. OEM integration of this device into a host product is not allowed per this application. Third-party Class II applications cannot be used for integrating this device with different host products and/or antenna(s). Alternatively, a separate FCC equipment authorization for new antenna(s) or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment.

Application Details

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter

Date of Grant

Apr 27, 2015

Application Purpose

Original Equipment

Date of Application

Apr 27, 2015

Equipment Note

Multi purpose autonomous remote management system

Frequency Range

916.80000000 - 916.80000000

Company

ISA - Intelligent Sensing Anywhere

Country

Portugal

Documents & Files

Select a file to view

Users Manual

↗

Cover Letter(s)

↗

External Photos

ID Label/Location Info

↗

Internal Photos

Test Report

↗

Test Setup Photos

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Text truncated - open the document above for the full version.

Cover Letter(s)

SGS North America Inc. Consumer Testing Services 620 Old Peachtree Road, Suite 100, Suwanee, GA 30024 t (770) 570-1800 f (770) 277-8187 www.sgs.com/cts Member of the SGS Group (SGS SA) Request for Confidentiality Date: April 2, 2015 Subject: Confidentiality Request for: 2AEAU-ISMTI-V1 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual ______ISA - Intelligent Sensing Anywhere)______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _EMC Manager / Agent for ISA _______David Schramm_____ (Signature/Title ) (Print name)

Cover Letter(s)

SGS North America Inc. Consumer Testing Services 620 Old Peachtree Road, Suite 100, Suwanee, GA 30024 t (770) 570-1800 f (770) 277-8187 www.sgs.com/cts Member of the SGS Group (SGS SA) Limited Modular Approval Letter Date: April 22, 2015 Subject: Limited Modular Approval Request for: 2AEAU-ISMTI-V1 To Whom It May Concern: ISA maintains control of the installation of the module into their devices which were represented by the host device used for testing. The end product will always have the module and antenna assembly installed when it is included as an option. There is no option to purchase the module outside of a product, so there will be no instructions available for OEM installation. Additionally, the antenna used during testing is the only antenna option available. Modular Approval Requirement Yes No (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over- modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X Sincerely, By: _EMC Manager / Agent for ISA _______David Schramm_____ (Signature/Title ) (Print name)

ID Label/Location Info

Test Report

Text truncated - open the document above for the full version.

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	916.8 MHz - 916.8 MHz	-

Modular Type

Limited Single Modular Approval

Confidentiality

Long Term

Grant Notes